Abstract
The design of multisaw equipment with circular sawblade motion is considered. Optimal parameters are determined for a multisaw module operating with negative feedback regarding the working force. That ensures high precision and minimum cost in sawing. Automatic rearrangement of the blades on the shafts of the multisaw system is possible.
Similar content being viewed by others
REFERENCES
Yur’ev, A., An idea embodied in 100 years, Tekh.-Molodezhi, 1998, no. 6, pp. 4–6.
Prokopov, V.S., Numerical analysis of the dynamic characteristics of a multi-saw machine with circular translational movement of wood-cutting blades, Cand. Sci. (Eng.) Dissertation, Moscow: Bauman Moscow State Tech. Univ., 2013.
Blokhin, M.A. and Tsyzhipov, D.Z., Providing dynamic stability of a multirip saw module performing plane rotational–translational motion as a part of a saw unit, J. Mach. Manuf. Reliab., 2020, vol. 49, pp. 776–782. https://doi.org/10.3103/S1052618820090046
Blokhin, M.A., Tsyzhipov, D.Z., and Gracheva, E.Y., Saw-blade stabilization by negative feedback, Russ. Eng. Res., 2021, vol. 41, pp. 515–518. https://doi.org/10.3103/S1068798X21060046
Gavryushin, S.S., Prokopov, V.S., and Blokhin, M.A., Numerical analysis of the dynamic characteristics of a multi-saw machine with circular translational movement of wood-cutting blades, Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Ser. Mashinostr., 2010, no. 4 (81), pp. 108–118.
Fung, V.B., Dang, M.Kh., and Gavryushin, S.S., Development of a mathematical model for the life cycle management process of a new type multisaw machine, Nauka Obraz., 2017, no. 2, pp. 87–109.
Fung, V.B., Automation and control of decision-making process in multi-criteria design of a saw unit of sawmill, Cand. Sci. (Eng.) Dissertation, Moscow: Bauman Moscow State Tech. Univ., 2017.
Blokhin, M.A., Detuning of operating frequencies of the saw module with a plane rotational–translational motion of the blades as a part of a multi-sawing block, Vestn. Mashinostr., 2019, no. 7, pp. 36–41.
Prokof’ev, G.F., Ivankin, I.I., and Kazantsev, V.A., Povyshenie kachestva pileniya drevesiny na lesopil’nykh ramakh (Improving the Quality of Wood Sawing on Sawmill Frames), Arkhangel’sk: Arkhangelsk State Tech. Univ., 2007.
Prokof’ev, G.F. and Miklovtsik, N.Yu., Pilenie drevesiny na lesopil’nykh ramakh i povyshenie ego effektivnosti v voprosakh i otvetakh (Wood Sawing on Sawmill Frames and Increasing Its Efficiency in Questions and Answers), Arkhangel’sk: Lomonosov North. (Arct.) Fed. Univ., 2011.
Gavryushin, S.S., Baryshnikova, O.O., and Boriskin, O.F., Chislennyi analiz elementov konstruktsii mashin i priborov (Numerical Analysis of the Construction Elements of Machines and Equipment), Moscow: Bauman Moscow State Tech. Univ., 2014.
Fung, V.B., Gavryushin, S.S., and Blokhin, M.A., Balancing a multirip bench with circular reciprocating saw blades, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2015, no. 12, pp. 3–10.
Phuong, B.V., Gavriushin, S.S., Minh, D.H., et al., Application of a novel model “requirement–object–parameter” for design automation of complex mechanical system, in Advances in Intelligent Systems and Computing, vol. 1127: Advances in Intelligent Systems, Computer Science and Digital Economics, Cham: Springer, 2020, pp. 375–384. https://doi.org/10.1007/978-3-030-39216-1_34
Eremeykin, P.A., Zhargalova, A.D., and Gavriushin, S.S., A software system for thin-walled parts d-eformation analysis, Advances in Intelligent Systems and Computing, vol. 658: Advances in Artificial Systems for Medicine and Education, Cham: Springer, 2018, pp. 259–265. https://doi.org/10.1007/978-3-319-67349-3_24
Gavryushin, S.S., Elements of controlled elastic deformation for functional devices of robotic equipment, Mekhatronika, 2000, no. 5, p. 16.
Galakhar, A.S. and Gavryushin, S.S., Defining the assigned useful life of operational facilities taking into account the safe operation index, J. Mach. Manuf. Reliab., 2018, vol. 47, no. 4, pp. 345–348.
Blokhin, M.A. and Podlesnyi, D.A., Corrective masses in a multisaw system with circular motion of linear saw blades, Russ. Eng. Res., 2020, vol. 40, pp. 453–457. https://doi.org/10.3103/S1068798X20060076
Blokhin, M.A., Mechatronics and robot engineering in woodcutting equipment, Russ. Eng. Res., 2019, vol. 39, pp. 923–927. https://doi.org/10.3103/S1068798X19110054
Blokhin, M.A., Podlesnyi, D.A., and Rodionov, O.A., Solution of the problem of reduction of the effect of lateral force on the stability of the saw blade, Izv. Vyssh. Uchebn. Zaved., Lesn. Zh., 2020, no. 2, pp. 127–128.
Gavryushin, S.S. and Nikolaeva, A.S., Method of change of the subspace of control parameters and its application to problems of synthesis of nonlinearly deformable axisymmetric thin-walled structures, Mech. Solids, 2016, vol. 51, pp. 339–348. https://doi.org/10.3103/S0025654416030110
Valiashvili, N.V. and Gavryushin, S.S., Soprotivlenie materialov i konstruktsii (Strength of Materials and Constructions), Moscow: Yurait, 2017.
ACKNOWLEDGMENTS
We thank our colleagues in departments RK5 and RK9 at Bauman Moscow State Technical University for participating in the strength calculations.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Blokhin, M.A., Gorozhankin, Z.V. & Hismatullin, R.R. Design Features of a Multisaw Module with Circular Sawblade Motion. Russ. Engin. Res. 42, 311–315 (2022). https://doi.org/10.3103/S1068798X22040037
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22040037