Abstract
In electrical discharge machining, the formation of the modified surface layer depends on the physicochemical properties of the anode and cathode and the machining conditions. Experiments show that the mass transfer and coating thickness decrease with increase in thermal conductivity and decrease in melting point of the anode and cathode. The mass transfer and state of the modified surface are also impaired by increase in energy of the generator pulses and increase in roughness of the machined surface. These data are fundamental in selecting electrode materials and creating metal coatings with specified functional properties.
Similar content being viewed by others
REFERENCES
Burumkulov, F.Kh., Lezin, P.P. Senin, P.V., et al., Elektroiskrovye tekhnologii vosstanovleniya i uprochneniya detalei mashin i instrumentov (teoriya i praktika) (Electric Spark Technologies of Reparation and Hardening of Machine Parts and Tools: Theory and Practice), Saransk: Krasnyi Oktyabr’, 2003.
Velichko, S.A., Martynov, A.V., Kuznetov, I.S., and Hassan, I.H., Predicting the erosion resistance of an anode in electrospark surfacing, Russ. Eng. Res., 2020, vol. 40, no. 12, pp. 1039–1041.
Senin, P.V., Velichko, S.A., Martynov, A.V., and Martynova, E.G., Increasing the wear resistance of forged tools by electrospark deposition, Russ. Eng. Res., 2020, vol. 40, no. 5, pp. 427–430.
Ivanov, V.I., Solov’ev, S.A., Velichko, S.A., and Ignat’kov, D.A., Analysis of electrical impulse processes during electrospark treatment of metal surfaces in a gaseous environment, Svar. Proizvod., 2016, no. 4, pp. 25–33.
Verkhoturov, A.D., Podchernyaeva, I.A., Samsonov, G.V., and Fomenko, V.S., Dependence of anode erosion on the state of the hardened surface during electrospark alloying, Elektron. Obrab. Mater., 1970, no. 6, pp. 29–31.
Boitsov, A.G., Mashkov, V.N., Smolentsev, V.A., and Khvorostukhin, L.A., Uprochnenie poverkhnostei detalei kombinirovannymi sposobami (Strengthening of the Surfaces of Parts by Combined Methods), Moscow: Mashinostroenie, 1991.
Verkhoturov, A.D., Podchernyaeva, I.A., Panashenko, V.M., and Konevtsov, L.A., Elektroiskrovoe legirovanie titana i ego splavov s metallami i kompozitsionnymi materialami (Electrospark Alloying of Titanium and Its Alloys with Metals and Composites), Burenin, A.A., Ed., Komsomolsk-on-Amur: Inst. Mashinoved. Metall., Dal’nevost. Otd., Ross. Akad. Nauk, 2014.
Burumkulov, F.Kh., Senin, P.V., Velichko, S.A., et al., The properties of nanocomposite coatings formed on a steel 20H surface by means of electrospark processing using rod-shaped electrodes of steels 65 G and Sv 08, Surf. Eng. Appl. Electrochem., 2009, vol. 45, no. 6, pp. 455–460.
Veselovskii, V.S., Grafit (Graphite), Moscow: Metallurgiya, 1960.
Velichko, S.A., Ivanov, V.I., and Rakov, N.V., TU 3312-002-02069964–2014. Ustanovki dlya elektroiskrovoi obrabotki serii BIG. Tekhnicheskie usloviya (TU 3312-002-02069964–2014. Installations for Electrospark Machining of the BIG Series. Technical Specifications), Saransk: Gos. Reg. Tsentr. Standart., Metrol., Ispyt., 2014.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Velichko, S.A., Kravchenko, I.N., Martynov, A.V. et al. Surface Destruction in Electrical Discharge Machining. Russ. Engin. Res. 41, 967–970 (2021). https://doi.org/10.3103/S1068798X21100282
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21100282