Abstract
Maintenance of CNC machine tools in an operative condition is considered. Attention focuses on the appropriate monitoring and control systems. The structure of the required control system and the corresponding control functions are presented. The starting point is to mount a module containing sensors of various types, including vibroacoustic sensors, on each machine tool. The machine tools’ proximity to a critical state is assessed by means of neural networks, fuzzy inference, and expert evaluation of the risk factors.
Similar content being viewed by others
REFERENCES
Tugengol’d, A.K., Dimitrov, V.P., Borisova, L.V., et al., Controlling the state of machine tools, Stanki Instrum., 2018, no. 7, pp. 8–15.
Mitchell, J.S., From vibration measurements to condition based maintenance: seventy years of continuous progress, Sound Vib., 2007, vol. 41, pp. 62–78. pdfs.semanticscholar.org.
Tugengol’d, A.K., Dimitrov, V.P., Borisova, L.V., et al., Controlling the state of machine tools, Russ. Eng. Res., 2018, vol. 38, no. 12, pp. 1056–1062.
Tugengol’d, A.K., Dimitrov, V.P., Borisova, L.V., et al., Autonomous maintenance of digital equipment, Russ. Eng. Res., 2019, vol. 39, no. 6, pp. 510–515.
Tugengol’d, A.K., Voloshin, R.N., Yusupov, A.R., et al., Maintenance of technological machines based on digitalization, Vestn. Donsk. Gos. Tekh. Univ., 2019, vol. 19, no. 1, pp. 74–80.
GOST (State Standard) R ISO 13373-1–2009: Condition Monitoring and Diagnostics of Machines, Vibration Condition Monitoring, Part 1: General Procedures, Moscow: Standartinform, 2010, p. 31.
GOST (State Standard) R ISO 13379-1–2015: Condition Monitoring and Diagnostics of Machines, Data Interpretation and Diagnostics Techniques, Part 1: General Guidelines, Moscow: Standartinform, 2015, p. 31.
Tugengol’d, A.K., et al., RF Patent 2691225, 2018, p. 6
GOST (State Standard) R 51901.12–2007 (IEC 60812:2006): Risk Management, Procedure for Failure Mode and Effects Analysis, Moscow: Standartinform, 2007, p. 40.
GOST (State Standard) R IEC 60300-3-11: 1999. Risk Management, Guidance for Application of Dependability Management, Moscow: Standartinform, 2018, p. 40.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Tugengol’d, A.K., Voloshin, R.N., Dimitrov, V.P. et al. Monitoring the Condition of CNC Machine Tools. Russ. Engin. Res. 40, 763–767 (2020). https://doi.org/10.3103/S1068798X2009021X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X2009021X