Abstract
The influence of gear synthesis parameters used in Expert software on the shape and size of the contact pattern and on the contact pressure is analyzed. An algorithm is proposed for identifying the shape of the lateral tooth surfaces that minimizes the contact pressure in a specified transmission. The constraints in optimization are the specified distances of the contact spot from the edges of the teeth. An example of the algorithm’s application is presented.
Similar content being viewed by others
References
Kedrinskii, V.N. and Pismanik, K.M., Stanki dlya obrabotki konicheskikh zubchatykh koles (Machines for Machining Conical Gears), Moscow: Mashinostroenie, 1967.
Khlebalin, N.F., Narezanie konicheskikh zubchatykh koles (Insertion of Conical Gears), Leningrad: Mashinostroenie, 1978.
Medvedev, V.I., Synthesis of nonorthogonal conical and hypoid tooth pairs, Probl. Mashinostr. Nadezhn. Mash., 1999, no. 5, p. 3.
Litvin, F.L., Teoriya zubchatykh zatseplenii (Theory of Gear Engagement), Moscow: Nauka, 1968.
Lopato, G.A., Kabatov, N.F., and Segal’, M.G., Konicheskie i gipoidnye peredachi s krugovymi zub’yami (Conical and Hypoid Transmissions with Round Teeth), Moscow: Mashinostroenie, 1977.
Sheveleva, G.I., Volkov, A.E., and Medvedev, V.I., Software for the production of conical and hypoid gears with round teeth, Tekhn. Mashinostr., 2001, no. 2, p. 40.
Medvedev, V.I., Flexural stress in round teeth of conical gears, Probl. Mashinostr. Nadezhn. Mash., 2003, no. 4, pp. 32–40.
Sheveleva, G.I., Volkov, A.E., and Medvedev, V.I., Comparison of methods of contact-pressure calculation in conical transmissions with round teeth, Vestn. Mashinostr., 2003, no. 6, pp. 22–23.
Medvedev, V.I. and Sheveleva, G.I., Synthesis of helical conical transmissions on the basis of the contact strength, Probl. Mashinostr. Nadezhn. Mash., 2002, no. 4, p. 12–15.
Volkov, A.E. and Medvedev, V.I., Proektirovochnye i tekhnologicheskie raschety konicheskikh peredach s krugovymi zub’yami: Ucheb. posobie (Design and Technological Calculations of Conical Transmissions with Round Teeth: A Textbook), Moscow: MGTU Stankin, 2007.
Volkov, A.E., Matveenkov, D.S., and Medvedev, V.I., Optimizing the design parameters of conical pairs with round teeth, Russ. Eng. Res., 2010, vol. 30, no. 10, pp. 1060–1064.
Matveenkov, D.S. and Medvedev, V.I., Minimizing the contact pressure in conical gears with round teeth, Materialy 2-i mezhdunar. nauch.-praktich. konf. (Proceedings of Second International Conference), St. Petersburg: SPb. Gos. Politekhn,. Univ., 2012.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.I. Medvedev, D.S. Matveenkov, A.E. Volkov, 2014, published in STIN, 2014, No. 7, pp. 7–14.
About this article
Cite this article
Medvedev, V.I., Matveenkov, D.S. & Volkov, A.E. Synthesis of contact-optimal spiral bevel gears. Russ. Engin. Res. 35, 51–56 (2015). https://doi.org/10.3103/S1068798X15010190
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15010190