Abstract
The results of studies on the development of new-generation 6- to 110-kV electroconductive busbars based on novel composite materials with incorporated elements for digital diagnostics and monitoring are presented. The use of different types of compounds for the manufacture of insulation systems is considered. Attention is focused on the design features of high-voltage busbars, as well as on the insulation systems thereof. It is shown that epoxy compounds including in the composition with other materials are currently the main cast insulation for high-voltage busbars. The main advantages of cast insulation for high-voltage busbars compared to other types of insulation are determined. The main directions of development of insulating systems for busbars are established. Key factors that will provide the electric strength and the thermal operation modes of insulation systems are established.
Similar content being viewed by others
REFERENCES
STO 56947007-29.120.60.106-2011. Tokoprovody s litoi (tverdoi) izolyatsiei na napryazhenie 6–35 kV. Tekhnicheskie trebovaniya (STO 56947007-29.120.60.106-2011: Conductors with Solid Insulation for 6–35 kV Voltage, Specification), Moscow: FSK YeES, 2011.
ETA-COM/Betobar-r. http://www.etacomcs.com/ ru/products-solutions-3.htm.
RTK-Elektro-M, Conductors with solid insulation of BETOBAR-R series. https://shinoprovod.ru/upload/ iblock/aa5/aa59f06dbb4954c47cac0da5367e135c.pdf.
Phase-insulated conductors with solid RitzSIS insulation. https://www.rauta-energy.ru/pofaznoizolirovannye-tokoprovody-s-litoj-izolyatsiej-sis.html.
Sato, J., Kinoshita, S., Sakaguchi, O., Miyagawa, M., Shimizu, T., and Homma, M., Solid Insulated switchgear and investigation of its mechanical and electrical reliability, Electr. Eng. Jpn., 2011, vol. 174, no. 4.
Varivodov, V.N., Kovalev, D.I., Zhullikov, S.S., Golubev, D.V., Romanov, V.A., and Mirzabekyan, G.Z., The use of solid polymeric insulation for high-voltage switchgears and bus bars, Elektr. Stn., 2020, no. 10.
Varivodov, V.N., Kovalev, D.I., Krupenin, N.V., and Khrenov, S.I., Permissible electrical-field intensities in the epoxy cast insulation of a 6 to 110 kV switchgear, Russ. Electr. Eng., 2018, vol. 89, no. 5.
Funding
The work on the development of innovative electroconductive busbars for a rated voltage of 6–110 kV performed at National Research University “Moscow Power Engineering Institute” was financially supported by the Ministry of Science and Higher Education of the Russian Federation.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by O. Polyakov
About this article
Cite this article
Kovalev, D.I., Varivodov, V.N., Golubev, D.V. et al. Development of Insulation Systems for High-Voltage Busbars with Solid Insulation. Russ. Electr. Engin. 92, 185–192 (2021). https://doi.org/10.3103/S1068371221040039
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068371221040039