Abstract
The issues of energy efficiency of oil-producing rod pump setups with new alternative electric drives on the basis of valve electric engines replacing existing asynchronous motors have been examined. A technique for selecting the main dimensions and a procedure for electromagnetic calculations of the valve motors using commonly applied materials are presented. It has been concluded that, in the drives of oil rocking machines equipped with frequency converters to adjust the speed of oscillations, the use of valve motors instead of asynchronous ones is effective. This should allow reducing the power consumption in the drives of these machines by 10–12%.
Similar content being viewed by others
REFERENCES
Pozdeev, A.D., Afanasyev, A.A., Korolev, E.G., Makarov, V.A., Nesterin, V.A., Selivanov, N.M., and Noskov, V.A., Synchronous engine with permanent magnets for electric drive of metalworking machines, Elektrotekhnika, 1983, no. 10.
Charonov, V.Ya., Al’tshuller, M.I., Genin, V.S., Ivanov, A.G., Kiryushin, V.V., and Borisov, L.F., Sredstva avtomatizatsii tekhnologicheskikh ustanovok neftegazodobyvayushchikh predpriyatii (Automation of Technological Installation of Oil-Gas Producing Enterprises), Cheboksary: Ofisnaya Poligrafiya, 2002.
Catalogue of Vladimir Electromotor Plant (VEMZ). http://vemz.nt-rt.ru. Accessed May 30, 2018.
Electrical engines and drives. http://www.cheaz.ru/ products/elm/. Accessed June 4, 2018.
Proektirovanie elektricheskikh mashin (Engineering of Electric Machines), Kopylov, I.P., Ed., Moscow: Yurait, 2011.
Gol’dberg, O.D., et al., Proektirovanie elektricheskikh mashin: uchebnik dlya vtuzov (Engineering of Electric Machines: Manual for Higher Education Technical Institutions), Gol’dberg, O.D., Ed., Moscow: Vysshaya Shkola, 1984.
GOST (State Standard) 21427.2-83: Cold-Rolled Isotropic Electrical-Sheet Steel. Specifications, Moscow: Izd. Standartov, 1983.
Vol’dek, A.I., Elektricheskie mashiny (Electrical Machines), Moscow: Energiya, 1966.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by G. Dedkov
About this article
Cite this article
Afanasyev, A.A., Nesterin, V.A., Genin, V.S. et al. Increasing the Efficiency of the Electrical Drive of an Oil Rocking Machine. Russ. Electr. Engin. 89, 468–472 (2018). https://doi.org/10.3103/S1068371218080023
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068371218080023