Abstract
Coking is obtained from the Moroccan refinery, which has mainly experienced a serious problem of the coking formation inside packed beds columns. The calcined petroleum coke properties need to meet the specifications for aluminum anode-grade coke. The aim of the present paper is to evaluate the physical-chemical characteristics of coking formed inside petrochemical distillation columns before and after thermal treatment. Coking undergoes additional thermal processing to produce calcined coking. Coking properties evaluated are: carbon, hydrogen, nitrogen, sulfur, metals (Cu, Cr, Zn, Fe, V, Mo, Zr, W, Mg), weigh loss, real density, and calorific value. The results of this study confirm that the calcined coking can be used as a good material for making carbon anodes.
Similar content being viewed by others
REFERENCES
El Korchi, K., Alami, R., Bensitel, A., Outaye, R., Echchelh, A., and Chaouch, A., Int. J. Res. Stud. Sci.,Eng. Technol., 2016, vol. 3, no. 9, pp. 11–19.
Speight, J.G. and Ozum, B., Petroleum Refining Processes, New York: Marcel Dekker, 2002, p. 295.
Speight, J.G., Catal. Today, 2004, vol. 98, p. 55.
Radenovic, A., Nafta, 2009, vol. 60, p. 171.
Thorpe, A.N., Senftle, F.E., Alexander, C., Dulong, F.T., La Count, R.B., and Friedman, S., Fuel, 1987, vol. 66, no. 2, pp. 147–153.
Siskin, M., Kelemen, S.R., Eppig, C.P., Brown, L.D., and Afeworki, M., Energy Fuels, 2006, vol. 20, p. 1227.
Al-Haj Ibrahim, H. and Ali, M.M., Period. Polytech., Chem. Eng., 2004, vol. 48, no. 1, pp. 53–62.
Birghila, S. and Carazeanu Popovici, I., Rom. J. Phys., 2011, vol. 56, p. 976.
Fadeeva, V.P., Tikhova, V.D., and Nikulicheva, O.N., J. Anal. Chem., 2008, vol. 63, no. 11, pp. 1094–1106.
Craig, N., Speakman, R.J., Popelka-Filcoff, R.S., Glascock, M.D., Robertson, J.D., Shackley, M.S., and Aldenderfer, M.S., J. Archaeol. Sci., 2007, vol. 34, no. 12, pp. 2012–2024.
Sheppard, P.J., Irwin, G.J., Lin, S.C., and McCaffrey, C.P., J. Archaeol. Sci., 2011, vol. 38, no. 1, pp. 45–56.
ASTM D3175-11: Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke, West Conshohocken, PA: ASTM Int., 2011.
El Korchi, K., Alami, R., Tchich, N., Tiskar, M., Bentoutou, N., and Chaouch, A., J. Mater. Environ. Sci., 2017, vol. 8, no. 5, pp. 1847–1852.
Obernberger, I., Brunner, T., and Bärnthaler, G., Chemical properties of solid biofuels—significance and impact, Biomass Bioenergy, 2006, vol. 30, no. 11, pp. 973–982.
Commandré, J.-M., Formation des Oxydes d’Azote lors de la Combustion de Cokes de Pétrole dans des Conditions de Précalcinateur de Cimenterie, Toulouse: Inst. Natl. Polytech. Toulouse, 2002,
Al-Haj Ibrahim, H., Thermal treatment of Syrian sponge coke, J. King Saud Univ.,Eng. Sci., 2005, vol. 18, no. 2, pp. 261–270.
Ellis, P.J. and Paul, C.A., Proc. 3rd Int. Conf. on Refinery Processing (2000 AIChE Spring National Meeting, Atlanta), New York: Am. Inst. Chem. Eng., 2000, pp. 86–112.
Zexuan, Z., PhD Theses, 2007.
Al-Haj Ibrahim, H., Ara. J. Sci. Eng., 2005, vol. 30, no. 2, pp. 153–161.
Al-Haj Ibrahim, H. and Ali, M.M., J. King Saud Univ.,Eng. Sci., 2005, vol. 2. pp. 199–212.
Sun, X., Hwang, J.Y., Huang, X., and Li, B., J. Mater. Charact. Eng., 2009, vol. 8, no. 4, pp. 249–259.
Commandre, J.M. and Salvador S., Fuel Process. Technol., 2005, vol. 86, pp. 795–808.
Jegadeesan, G., Al-Abed, S.R., and Pinto, P., Fuel, 2008, vol. 87, pp. 1887–1893.
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
K. El Korchi, Alami, R. & Chaouch, A. Evaluation of the Physical-Chemical Properties and Thermal Treatment of Coking. Coke Chem. 63, 214–217 (2020). https://doi.org/10.3103/S1068364X20040043
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068364X20040043