Skip to main content
Log in

Experimental investigations and thermodynamic calculations of the structural and phase composition in the Ti–Si–C system

  • Refractory, Ceramic, and Composite Materials
  • Published:
Russian Journal of Non-Ferrous Metals Aims and scope Submit manuscript

Abstract

Thermodynamic calculations of the structural-phase equilibrium in the Ti–Si–C system at 1100–1400°C are performed using the CALPHAD method. Calculated phase diagrams of this system are presented. It is established that 100% of the Ti3SiC2 phase is formed with the stoichiometric component ratio. With the deviation of the carbon or silicon content, titanium carbide, titanium disilicide, or silicon carbide appear in the system. The temperature almost does not affect the phase composition in the studied temperature range. The calculated data are compared with the experimental determination of the phase composition of the samples of the mentioned system after the spark-plasma sintering of the mechanically activated powder composition. In practice, the process temperature and duration of high-temperature holding substantially affect the phase composition of the final product, which is associated with the limited rate of solid-phase reactions during the synthesis of compounds. The samples have a grain size of 1–5 μm and hardness of 4–15 GPa, depending the phase composition.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Barsoum, M.W., The MN + 1AXN: a new class of solids: thermodynamically stable nanolaminates, Prog. Solid State Chem., 2000, vol. 28, pp. 201–281.

    Article  Google Scholar 

  2. Sarkar, D. and Kumar, B.V. Manoj, and Basusarkar, B., Understanding the fretting wear of Ti3SiC2, J. Eur. Ceram. Soc., 2006, vol. 26, no. 13, pp. 2441–2452.

    Article  Google Scholar 

  3. Barsoum, M.W. and Barsoum, T., El-Raghy, synthesis and characterization of a remarkable ceramic: Ti3SiC2, J. Am. Ceram. Soc., 1996, vol. 79, no. 7, pp. 1953–1956.

    Article  Google Scholar 

  4. Barsoum, M.W., El-Raghy, T., and Rawn, C.J., Thermal properties of Ti3SiC2, J. Phys. Chem. Solids, 1999, vol. 60, no. 4, pp. 429–439.

    Article  Google Scholar 

  5. Barsoum, M.W., Brodkin, D., and El-Raghy, T., Formation and thermal stability of amorphous Ti–Si–C alloys, Scr. Mater., 1997, vol. 3, no. 5, pp. 535–541.

    Article  Google Scholar 

  6. Popov, V.V. and Gorbachev, I.I., Analysis of solubility of carbides, nitrides and carbonitrides in steel by methods of computer thermodynamics. I. Description of thermodynamic properties. Computational method, Fiz. Met. Metalloved., 2004, vol. 98, no. 4, pp. 11–21.

    Google Scholar 

  7. Saunders, N. and Miodownik, A.D., Calphad: Calculation of phase diagrams, a comprehensive guide (Pergamon Materials Series), vol. 1, Cahn, R.W., Ed., Oxford: Pergamon, 1998.

    Google Scholar 

  8. Sandman, B. and Agren, J., A regular solution model for phase with several components and sublattices, suitable for computer applications, J. Phys. Chem. Solids, 1981, vol. 42, no. 4, pp. 297–301.

    Article  Google Scholar 

  9. Hillert, M. and Staffonsson, L.-I., The regular solution model for stoichiometric phases and ionic melts, Acta Chem. Scand., 1970, vol. 24, no. 10, pp. 3618–3626.

    Article  Google Scholar 

  10. Harvig, H., An extended version of the regular solution model for stoichiometric phases and ionic melts, Acta Chem. Scand., 1971, vol. 25, no. 9, pp. 3199–3204.

    Article  Google Scholar 

  11. Dumitrescu, L.F.S., Hillert, M., and Sundman, B., A reassessment of Ti–C–N based on a critical-review of available assessments of Ti–N and Ti–C, Z. Metallkd., 1999, vol. 90, pp. 534–541.

    Google Scholar 

  12. Gröbner, J., Lukas, H.L., and Aldinger, F., Thermodynamic calculation of the ternary system Al–Si–C, CALPHAD, 1996, vol. 20, no. 2, pp. 247–254.

    Article  Google Scholar 

  13. Dinsdale, A.T., SGTE data for pure elements, CALPHAD, 1991, vol. 15, no. 4, pp. 317–425.

    Article  Google Scholar 

  14. Seifert, H.J., Lukas, H.L., and Petzow, G., Thermodynamic optimization of the Ti–Si system, Z. Metallkd., 1996, vol. 87, no. 1, pp. 2–13.

    Google Scholar 

  15. Du, Y. and Schuster, J.C., Experimental and thermodynamic investigations in the Ti–Si–C system, Ber. Bunsen-Ges. Phys. Chem., 1998, vol. 102, no. 9, pp. 1185–1188.

    Article  Google Scholar 

  16. Du, Y., Schuster, J.C., Seifert, H.J., and Aldinger, F., Experimental investigation and thermodynamic calculation of the titanium–silicon–carbon system, J. Am. Ceram. Soc., 2000, vol. 83, no. 1, pp. 197–203.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to V. V. Popov.

Additional information

Original Russian Text © V.V. Popov, I.I. Gorbachev, A.Yu. Pasynkov, M.N. Kachenyuk, O.V. Somov, 2016, published in Izvestiya Vysshikh Uchebnykh Zavedenii, Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya, 2016, No. 4, pp. 51–59.

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Popov, V.V., Gorbachev, I.I., Pasynkov, A.Y. et al. Experimental investigations and thermodynamic calculations of the structural and phase composition in the Ti–Si–C system. Russ. J. Non-ferrous Metals 58, 552–559 (2017). https://doi.org/10.3103/S1067821217050145

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S1067821217050145

Keywords

Navigation