Abstract
The electrochemical deposition of coatings of double tungsten and molybdenum carbides from tungstate–molybdate–carbonate melts is investigated. The composition of formed coatings is investigated by X-ray fluorescent and X-ray phase analyses. The crystal size and coating thickness are determined using scanning electron microscopy. Optimal deposition parameters of W2C · Mo2C coatings are as follows: the melt composition is Na2WO4–(1.0–4.0 mol %) Li2WO4–(1.0–4.0 mol %) Li2MO4–(1.0–5.0 mol %) Li2CO3, the cathode current density is 750–1500 A/m2, the process temperature is 1123–1173 K, and the electrolysis duration is 4 h.
Similar content being viewed by others
References
Samsonov, G.V. and Epik, A.P., Tugoplavkie pokrytiya (Refractory Coatings), Moscow: Metallurgiya, 1973.
Andrievskii, R.A., Nanomaterials based on refractory carbides, nitrides, and borides, Usp. Khim., 2005, vol. 74, no. 12, pp. 1163–1175.
Rempel’, A.A., Nanotechnologies, properties and application of nanostructured materials, Usp. Khim., 2007, vol. 76, no. 5, p. 474.
Kushkhov, Kh.B., Malyshev, V.V., and Tishchenko, A.A., Electrodeposition of tungsten carbide and molybdenum carbide from the NaCl–LiF eutectic melt, Abstracts of Papers, Tezisy dokladov IX Vsesoyuznoi konferentsii po fizicheskoi khimii i elektrokhimii ionnykh rasplavov i elektrolitov (IX All-Union Conf. on Physical Chemistry and Electrochemistry of Ionic Melts and Electrolytes), Part 2, Sverdlovsk: UF Akad. Nauk SSSR, 1987, p. 21.
Kushkhov, Hh.B., Shapoval, V.I., and Malyshev, V.V., USSR Inventor’s Certificate No. 1319631, 1987.
Kushkhov, Kh.B., Shapoval, V.I., and Malyshev, V.V., Electrodeposition of molybdenum carbide coatings from halide–oxide melts, Zashch. Met., 1990, vol. 26, no. 6, p. 1019.
Stern, K.H., US Patern 4430170, 1984.
Kushkhov, Kh.B., Kardanov, A.L., Adamokova, M.N., and Kvashin, V.A, Investigation into the joint electrical reduction of tungsten, molybdenum, and carbon ions in tungstate–molybdate–carbonate solutions, Rasplavy, 2010, no. 6, p. 35.
Grilikhes, S.Ya., Elektrokhimicheskoe i khimicheskoe polirovanie (Electrochemical and Chemical Polishing), Leningrad: Mashinostroenie, 1987.
Kolmakov, A.I., Metodika prigotovleniya metallograficheskikh shlifov metallicheskikh ob”ektov, postupayushchikh na ekspertizu: Metodicheskie rekomendatsii (Preparation Procedure of Slices of Metallogrpahic Objects Entering the Expertise), Moscow: Eksp.-Krim. Tsentr. Min. Vnutr. Del Rossii, 1996.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Kh.B. Kushkhov, F.Yu. Kuchmezova, M.N. Adamokova, A.M. Asanov, 2015, published in Izvestiya Vysshikh Uchebnykh Zavedenii, Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya, 2015, No. 2, pp. 56–61.
About this article
Cite this article
Kushkhov, K.B., Kuchmezova, F.Y., Adamokova, M.N. et al. Electrodeposition of coatings of double carbides of tungsten and molybdenum from tungstate–molybdate–carbonate solutions. Russ. J. Non-ferrous Metals 57, 515–520 (2016). https://doi.org/10.3103/S1067821216050102
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821216050102