Abstract
The investigations dealing with the problems of forming polycrystalline materials with a high level of physical-and-mechanical properties using the method of diamond powder sintering at high pressure have been considered. The compacting mechanism of diamond nanopowders of different genesis under exposure to high pressure and high temperature is described, special features of pore structure formations are considered, and the critical role of the specified factor in sintering is shown. The need of degassing and modification of the diamond particle surface during the preparation for sintering is noted. The effectiveness of tungsten and its compounds is shown as an activating addition for producing wear-resistant thermostable diamond nanocomposites.
Similar content being viewed by others
References
Sidorenko, S.I., Makogon, Yu.M., and Voloshko, S.M., Materialoznavstvo tonkoplivkovykh nanostruktur. Dyfuziia i reaktsii (Materiology of Thin–Film Nanostructures. Diffusion and Reactions), Kyiv: Naukova Dumka, 2000.
Trefilov, V.I., Mil’man, Yu.V., and Firstov, S.A., Fizicheskie osnovy prochnosti tugoplavkikh metallov (Physical Principles of the Refractory Metal Strength), Kiev: Naukova Dumka, 1975.
Trefilov, V.I. and Mil’man, Yu.V., The impact of the Structural State and Temperature on Mechanical Properties of Superhard Materials, Superhard Materials: Synthesis, Properties, and Application: Reports of Intern. Workshop, Kiev: Naukova Dumka, 1983, pp. 81–86.
Andrievskii, R.A. and Spivak, I.I., Prochnost’ tugoplavkikh soedinenii i materialov na ikh osnove (Strength of High–Melting Compounds and Materials Based on Such Compounds), Chelyabinsk: Metallurgiya, 1989.
Larikov, L.N., Diffusion Processes in Nanocrystalline Materials, Metallofizika i Noveishie Tekhnologii, 1995, vol. 17, no. 1, pp. 3–29.
Larikov, L.N., Nanocrystalline Compounds of Metals, Metallofizika i Noveishie Tekhnologii, 1995, vol. 17, no. 9, pp. 56–68.
Gusev, A.I., Nanokristallicheskie materialy: metody polucheniya i svoistva (Nanocrystalline Materials: Production Methods and Properties), Yekaterinburg: UrO RAN, 1998.
Skorokhod, V.V., Some Problems of the Nanocrystalline Material Technology, Investigations of the Structure and Properties of Nanocrystalline Materials, Nanokristallicheskie Materialy, Kiev: IPM NAN Ukrainy, 1998, pp. 4–13.
Gusev, A.I., Effects of Nanocrystalline State in Compact Metals and Compounds, Uspekhi Fizicheskikh Nauk, 1998, vol. 168, no. 1, pp. 56–83.
Alyamovskii, S.I., Zainulin, Yu.G., and Shveikin, G.P., Oksikarbidy i oksinitridy metallov IVA i VA podgrup (Oxycarbides and Oxynitrides of Metals from IVA and VA Subgroups), Moscow: Nauka, 1981.
Siegel, R.W. and Fougere, G.E., Mechanical Properties of Nanophase Metals, Nanostruct. Mater., 1995, vol. 6, no. 1–4, pp. 205–216.
Noskova, N.I., Ponomareva, E.G., Pereturina, I.A., and Kuznetsov, V.N., Strength and Plasticity of Pd–Cu–Si Alloy in Amorphous and Nanocrystalline States, Fizika Metallov i Metallovedenie, 1996, vol. 81, issue 1, pp. 163–170.
Suryanarayana, C., Mukhopadhyay, D., Patankar, S.N., and Froes, F.H., Grain Size Effects in Nanocrystalline Materials, J. Mater. Res., 1992, vol. 7, no. 8, pp. 2114–2118.
DeCarli, P.S. and Jamieson, J.C., Formation of Diamond by Explosive Shock, Science, 1961, vol. 133, no. 3467, pp. 1821–1822.
Trueb, L.F., Microstructural Study of Diamonds Synthesized under Conditions of High Temperature and Moderate Explosive Shock Pressure, J. Appl. Phys., 1971, vol. 42, no. 2, pp. 503–510.
Savvakin, G.I., Ostrovskaya, N.R., and Oleinik, G.S., The Impact of Strongly Nonequilibrium Conditions of Dynamic Processing on the Structure of Diamond Powders, Poroshk. Metallurgiya, 1985, no. 4, pp. 78–83.
Gubin, S.A., Odintsov, V.V., and Pepekin, V.I., The Diagram of Carbon Phase States and its Use in Calculations of Detonation Parameters, Khimicheskaya Fizika, 1986, vol. 5, no. 1, pp. 111–120.
Gubin, S.A., Odintsov, V.V., and Pepekin, V.I., Thermodynamic Calculation of Ideal and Nonideal Detonations, Fizika goreniya i vzryva, 1987, vol. 23, no. 4, pp. 75–84.
Staver, A.M., Gubareva, N.V., Lyamkin, A.I., and Petrov, E.A., Ultrafine Diamond Powders Obtained by Using the Explosion Energy, Fizika Goreniya i Vzryva, 1984, vol. 20, no. 5, pp. 100–104.
Lyamkin, A.I., Petrov, E.A., Ershov, A.P., et al., Diamond Making from Explosives, DAN SSSR, 1988, vol. 302, no. 3, pp. 611–613.
Volkov, K.V., Danilenko, V.V., and Elin, V.I., Diamond Synthesis from the Carbon of Explosive Detonation Products, Fizika goreniya i vzryva, 1990, vol. 26, no. 3, pp. 123–125.
Oleinik, G.S. and Bochechka, A.A., On the Detonation Synthesis Mechanism of Forming Nanosize Particles of Diamond Obtained from Explosive Decomposition Products, J. Superhard Materials, 2008, vol. 30, no. 3, pp. 143–162.
Aleksenskii, A.E., Baidakova, M.V., Vul’, A.Ya., et al., Diamond–Graphite Phase Transition in Clusters of Ultradispersed Diamond, Fizika Tverdogo Tela, 1997, vol. 39, issue 6, pp. 1125–1134.
Gamarnik, M.Y., Energetical Preference of Diamond Nanoparticles, Phys. Rev. B., 1996, vol. 54, no. 3, pp. 2150–2156.
Gubarevich, T.M., Kostyukova, N.M., Sataev, R.R., and Fomina, L.V., Investigation of Micro–Trace Composition of Ultradispersed Diamond, Sverkhtverdye Materialy, 1991, no. 5, pp. 30–34.
Chukhaeva, S.I., Detkov, P.Ya., Tkachenko, A.P., and Toropov, A.D., Physicochemical Properties of Fractions Separated from Ultradispersed Diamonds, Sverkhtverdye Materialy, 1998, no. 4, pp. 29–36.
Gubarevich, T.M., Korzhenevskii, A.P., and Gamanovich, D.N., Industrial Complex for Production of Ultradispersed Diamonds, Sverkhtverdye Materialy, 1998, no. 4, pp. 17–22.
Savvakin, G.I., Ostrovskaya, N.R., and Oleinik, G.S., The Impact of Strongly Nonequilibrium Conditions of Dynamic Processing on the Structure of Diamond Powders, Poroshk. Metallurgiya, 1985, no. 4, pp. 78–83.
Golubev, A.S., Dubitskii, G.A., Kurdyumov, A.V., et al., Structure Formation of Lonsdeilite Based Polycrystals, DAN UkrSSR, Ser. A, 1984, no. 12, pp. 50–53.
Trefilov, V.I., Nochevkin, S.A., Savvakin, G.I., et al., Micropatterning of Polycrystals in the Powder Sintering Process of Detonation Synthesis Diamond, DAN USSR, 1985, vol. 283, no. 6, pp. 1379–1381.
Trefilov, V.I., Nochevkin, S.A., Oleinik, G.S., et al., Micropatterning of Polycrystals in the Powder Sintering Processes of Detonation Synthesis Diamond, DAN USSR, 1986, vol. 284, no. 4, pp. 860–863.
Bakun, O.V., Grigor’ev, O.N., Mel’nik, V.M., et al., Tverdost’ i treshchinostoikost’ vysokodispersnogo polikristallicheskogo almaza (Hardness and Crack Resistance of Highly Dispersed Polycrystalline Diamond), Fizika razrusheniya (Physics of Fracture), Tez. dokl. V Resp. konf., Kiev: IPM AN UkrSSR, 1985, pp. 254–255.
Britun, V.F. and Kurdyumov, A.V., The Structure of Polycrystals Produced by the Dynamic Synthesis Sintering of Diamond Powders, Sverkhtverdye Materialy, 1998, no. 4, pp. 36–41.
Danilenko, V.V., Petrusha, I.A., Oleinik, G.S., and Danilenko, N.V., Compact Structure Evolution during Nanodisperse Diamond Sintering at High Pressures, Sverkhtverdye Materialy, 1998, no. 4, pp. 53–61.
Lin, E.E., Novikov, S.A., Glushak, A.B., et al., Investigation of Conditions for Producing the Nanodiamond Based Powders and Compacts), Physicochemistry of Ultradisperse Systems, Papers of the IV All–Russia Conf., Moscow: MIFI, 1998.
Zvonarev, E.V., Senyut’, V.T., Starchenko, I.M., and Finskaya, V.M., Specific Features of UDD–Powder Compacting at High Pressures and Temperatures, Sverkhtverdye Materialy, 1998, no. 4, pp. 41–46.
Shipilo, V.B., Starchenko, I.M., Zvonarev, E.V., and Senyut’, V.T., Diamond–Containing Material Based on Detonation Synthesis Powders, Materialy, Tekhnologii, Instrumenty, 1997, vol. 2, no. 4, pp. 61–63.
Gryaznov, G.M., Ekimov, E.A., and Filonenko, V.P., Features of Nanodiamond Compacting, Physicochemistry of Ultradisperse Systems, Papers of the IV All–Russia Conf., Moscow: MIFI, 1998, pp. 269–270.
Shul’zhenko, A.A., Gargin, V.G., Shishkin, V.A., and Bochechka, A.A., Polikristallicheskie materialy na osnove almaza (Polycrystalline Diamond Based Materials), Kiev: Naukova Dumka, 1989.
Koval’chenko, M.S. and Dzhamarov, S.S., Powder Compacting Kinetics of Wurtzite Boron Nitride during Hot Pressing at High Pressure, Poroshk. Metallurgiya, 1984, no. 2, pp. 31–36.
Golovchan, V.T., Application Analysis of the Simplest Viscoplastic Model for Compacting Kinetic Investigation during the Sintering of Diamond Polycrystals, Sverkhtverdye Materialy, 2000, no. 2, pp. 8–18.
Mackenzie, J.K. and Shuttleworth, R., A Phenomenological Theory of Sintering, Proc. Phys. Soc. B., 1949, vol. 62, no. 12, pp. 833–852.
Bochechka, A.A. and Lutsenko, A.N., Kinetics of Diamond Powder Compacting at Different Temperatures and at High Pressure, Sverkhtverdye Materialy, 2002, no. 1, pp. 67–81.
Bochechka, A.A., Romashko, L.A., Gavrilova, V.S., et al., Special Features of Sintering of Diamond Powders Having Different Dispersity under Conditions of High Pressure, J. Superhard Materials, 2007, vol. 29, no. 1, pp. 17–23.
Bochechka, A.A., Analysis of Driving Forces of Sintering of Diamond Micro–and Nanoscale Powders at High Pressure, J. Superhard Materials, 2009, vol. 31, no. 5, pp. 292–299.
Bochechka, O.O., Compacting Mechanism of Detonation Synthesis Nanopowder during its Sintering at High Pressure, Porodorazrushayushchii i metalloobrabatyvayushchii instrument—tekhnika i tekhnologiya ego izgotovleniya i primeneniya, Kyiv: ISM im. V.N. Bakulya NAN Ukrainy, 2017, issue 20, pp. 177–182.
Shul’zhenko, A.A., Bochechka, A.A., Romanko, L.A., et al., Special Features of Sintering of Nanometric Diamond Powders Heat–Treated in Vacuum, Sverkhtverdye Materialy, 2000, no. 6, pp. 50–56.
Nazarchuk, S.M., Bilyavina, N.M., Gavrilova, V.S., et al., Sintering of the Detonation Synthesis Diamond Nanopowders with Additions of Refractory Metals and their Oxides, Synthesis, Sintering and Properties of Superhard Materials, Kyiv: Logos, 2010, pp. 101–107.
Nazarchuk, S.N., Bochechka, A.A., Gavrilova, V.S., et al., Polycrystalline Composite Material (Diamond–Tungsten Carbide)), J. Superhard Materials, 2011, vol. 33, no. 1, pp. 1–12.
Zabuga, V.Ya., Bochechka, O.O., Tsapyuk, G.G., et al., The Influence of Tungsten on the Kinetics of Diamond Nanopowder Oxidation, J. Superhard Materials, 2016, vol. 38, no. 1, pp. 8–17.
Kurylyak, T.O., Bochechka, O.O., and Kutsay, O.M., The Influence of Tungsten Additives on the Functional Covering of Diamond Nanopowder ACM 5 0,1/0, Scientific Works of 16th Int. Young Scientists Conf. “Optics and High Technology Material Science” (SPO 2015), Kyiv, Ukraine, 22–25 Oct. 2015, AP 18, pp. 68–69.
Novikov, N.V., Bochechka, A.A., and Nazarchuk, S.N., Special Features of Interaction between Components during the Reactionary Sintering of Diamond–Tungsten Carbide and Diamond–Silicon Carbide Components at High Pressure, Porodorazrushayushchii i metalloobrabatyvayushchii instrument—tekhnika i tekhnologiya ego izgotovleniya i primeneniya: Sb. nauch. tr., Kyiv: ISM im. V.N. Bakulya NAN Ukrainy, 2012, Issue 15, pp. 232–240.
Bochechka, O.O, Nazarchuk, S.M., Gavrilova, V.S., and Romanko, L.O., Manufacturing Nanocomposite “Diamond–Tungsten Carbide” at High Pressure, Int. Conf. 7th Diamond & Related Films, Zakopane, Poland, 28 June–2 July, 2010, Warsaw University of Technology, 2010, pp. 109–110.
Novikov, M.V., Bochechka, O.O., Nazarchuk, S.M., Gavrilova, G.S., Oleinik, G.S., Romanko, L.O., Sveshnikov, I.A.,and Zabolotnyi, S.D., Ukraine Patent 93803, IPC B24D 3/02, B22F 3/14, Production Process of Diamond Composite Material, Byul., 2011, no. 5.
Bochechka, O.O., Sveshnikov, I.A., Nazarchuk, S.M., et al., Diamond Polycrystalline Composite Material Diamond–Tungsten Carbide for Drilling Tools, Instrumentalnyi Svit, 2011, no. 1–2 (49–50), pp. 50–52.
Grinding Powders of Thermally Stable Synthetic Diamonds: TU U 28.5–05417377–075–2003, (Valid from 2003–12–23), Kyiv: Ukrmetrteststandart, 2003.
Bochechka, A.A., Perekos, A.E., Nazarchuk, S.N, Rud’, A.D., Gavrilova, V.S., and Kiryan, I.M., Enhancing the Level of Physical–Mechanical Properties of Diamond–Tungsten Carbide Nanocomposite, Abstracts of 3–rd Intern. Samson Conf. “Materials Science of High–Melting Compounds”, Kyiv, Ukraine, 23–25 May 2012, Kyiv, 2012.
Stakhniv, N.E., Devin, L.N., Bochechka, A.A., and Nazarchuk, S.N., Application of Diamond–Tungsten Carbide Nanocomposite in the Process of Fine Turning of Brass, Porodorazrushayushchii i metalloobrabatyvayushchii instrument—tekhnika i tekhnologiya ego izgotovleniya i primeneniya, Kyiv: ISM im. V.N. Bakulya, NAN Ukrainy, 2017, Issue 20, pp. 428–434.
Stakhniv, N.E., Devin, L.N., Bochechka, A.A., et al., Investigation of the Influence of the Phase Composition of the Diamond–Tungsten Carbide Nanocomposite Cutting Plate on the Process of Fine Turning of Aluminum and Brass Alloys, J. Superhard Materials, 2018, vol. 40, no. 3, pp. 197–205.
Osadchii, A.A., Nazarchuk, S.N., Bochechka, A.A., Devin, L.N., and Garbuz, T.A., Damping Properties of Diamond Nanocomposite with Additions of Tungsten Having Different Genesis, VI Intern. Samson Conf. “Materials Science of High–Melting Compounds”, Kyiv, Ukraine, 22–24 May 2018.
Stratapax* Drill Blanks & Geoset Drill Diamond //www.abrasivesnet.com/en/product/mbs/ strata/down/ DI%20Stratapax.pdf.
Bochechka, A.A., Degradation of Diamond Powder Particles under Exposure to High Pressure, Sverkhtverdye Materialy, 1983, no. 5, pp. 9–14.
Nazarchuk, S.N., Bochechka, A.A., and Petasyuk, G.A., Compacting of Diamond Powders under Exposure to High Pressure, Fizika i Tekhnika Vysokikh Davlenii, 2009, vol. 19, no. 3, pp. 7–11.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Ukrainian Text © O.O. Bochechka, 2018, published in Sverkhtverdye Materialy, 2018, Vol. 40, No. 5, pp. 38–50.
About this article
Cite this article
Bochechka, O.O. Production of Polycrystalline Materials by Sintering of Nanodispersed Diamond Nanopowders at High Pressure. Review. J. Superhard Mater. 40, 325–334 (2018). https://doi.org/10.3103/S1063457618050040
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1063457618050040