Skip to main content
SpringerLink
Log in

Critical comments to the Oliver–Pharr measurement technique of hardness and elastic modulus by instrumented indentations and refinement of its basic relations

  • Production, Structure, Properties
  • Published:
Journal of Superhard Materials Aims and scope Submit manuscript

Abstract

A critical analysis was made of the Oliver and Pharr method for determination of the hardness and elastic moduli of materials by instrumented indentations with the continuous recording of the P–hdiagrams (P is the force acting on the indenter, h is the approach of the indenter and a sample). Mistakes and insufficient justification were revealed in the basic theoretical relations of this method. In particular, this refers to an incorrect definition of the depth of the elastic contact hc, which is the base of these relalations. New refined basic relations and formulas for the determination of hardness and elastic modulus are given, in which the above defects are eliminated and which are based only on the assumption of elastic unloading of the indenter according to the classic theories of the elastic contact. In addition to the foregoing, using the data of the P–h diagram measured in the arbitrary laboratory coordinate system, an improved method of the stable determination of the contact stiffness S = dP/dh at the P–h diagram position have been proposed in the commonly accepted theoretical coordinate system in which its basic classic model relations are recorded. These refinements have been derived without additional assumptions to hypotheses to the Oliver and Pharr method and additional experimental measurements.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Oliver, W.C. and Pharr, G.M., An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res., 1992, vol. 7, pp. 1564–1583.

    Article  CAS  Google Scholar 

  2. Oliver, W.C. and Pharr, G.M., Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology, J. Mater. Res., 2004, vol. 19, pp. 3–20.

    Article  CAS  Google Scholar 

  3. Bulychev, S.I., Alekhin, V.P., Shorshorov, M.K., Ternovskii, A.P., and Shnyrev, G.D., Determination of Young’s modulus according to indentation diagram, Industrial Laboratory, 1975, vol. 41, pp. 1409–1412.

    Google Scholar 

  4. Shorshorov, M.K., Bulychev, S.I., and Alekhin, V.P., Work of plastic and elastic deformation during indenter indentation, Soviet Physics–Doklady, 1981, vol. 26, pp. 769–771.

    Google Scholar 

  5. Lo, R.Y. and Bogy, D.B., Compensating for elastic deformation of the indenter in hardness tests of very hard materials, J. Mater. Res., 1999, vol. 14, pp. 2276–2282.

    Article  CAS  Google Scholar 

  6. Hay, J.C., Bolshakov, A., and Pharr, G.M., A critical examination of the fundamental relations used in the analysis of nanoindentation data, Ibid., 1999, vol. 14, pp. 2296–2305.

    CAS  Google Scholar 

  7. Veprek, S., Mukherjee, S., Mannling, H.-D., and He, J., On the reliability of the measurements of mechanical properties of superhard coatings, Mater. Sci. Engineer. A., 2004, vol. 340, pp. 292–297.

    Article  Google Scholar 

  8. Cao, Y.P., Dao, M., and Lu, J., A precise correcting method for the study of the superhard material using nanoindentation tests, J. Mater. Res., 2007, vol. 22, pp. 1255–1264.

    Article  CAS  Google Scholar 

  9. Veprek-Heijman, M.G.J, Veprek, R.G., Argon, A.S., Parks, D.M., and Veprek, S., Non-linear finite element constitutive modeling of indentation into super- and ultrahard materials: The plastic deformation of the diamond tip and the ratio of hardness to tensile yield strength of super- and ultrahard nanocomposites, Surf. Coat. Technol., 2009, vol. 203, pp. 3385–3391.

    Article  CAS  Google Scholar 

  10. Hay, J., Agee, P., and Herbert, E., Continuous stiffness measurement during instrumented indentation testing, Exp. Tech., 2010, no. 3, pp. 86–94.

    Article  Google Scholar 

  11. Sneddon, I.N., Boussinesq’s problem for a rigid cone, Proc. Cambridge Philos. Soc., 1948, vol. 44, pp. 492–507.

    Article  Google Scholar 

  12. Borodich, F.M. and Galanov, B.A., Non-direct estimations of adhesive and elastic properties of materials by depth-sensing indentation, Proc. R. Soc. Ser. A, 2008, vol. 464, pp. 2759–2776.

    Article  CAS  Google Scholar 

  13. Borodich, F.M., Galanov, B.A., and Suarez-Alvarez, M.M., The JKR-type adhesive contact problems for power-law shaped axisymmetric punches, J. Mech. Phys. Solids, 2014, vol. 68, pp. 14–32.

    Article  Google Scholar 

  14. Borodich, F.M., Galanov, B.A., Gorb, S.N., Prostov, M.Y., Prostov, Y.I., and Suarez-Alvarez, M.M., Evolution of adhesive and elastic properties of polymers by the BG method, Macromol. React. Eng., 2013, vol. 7, pp. 555–563.

    Article  CAS  Google Scholar 

  15. Borodich, F.M., Galanov, B.A., Gorb, S.N., Prostov, M.Y., Prostov, Y.I., and Suarez-Alvarez M.M., An inverse problem for adhesive contact and non-direct evaluation of material properties for nanomechanics applications, NanoMMTA, 2012, vol. 1, pp. 80–92.

    Google Scholar 

  16. Galin, L.A., Contact problems of the theory of elasticity and viscoelasticity, Moscow: Nauka, 1980.

    Google Scholar 

  17. Galanov, B.A., Milman, Yu.V., Chugunova, S. I., and Goncharova, I. V., Investigation of mechanical properties of high-hardness materials by indentation, J. Superhard Mater., 1999, no. 3, pp. 23–35.

    Google Scholar 

  18. Galanov, B.A., Formulation and solving of some refined problems of elastic contact of two bodies, Izv. USSR Academy of Sciences, Mechanics of Solids, 1983, no. 6, pp. 56–63.

    Google Scholar 

  19. Galanov, B.A. and Krivonos, Yu. M., On accounting in the Hertz problem of tangential displacements on the contact surface, Calculating and Applied Mathematics, 1984, issue 53, pp. 87–94.

    Google Scholar 

  20. Galanov, B.A. and Krivonos, Yu. M., Non-linear accounting in the Hertz task of tangential displacements on the contact surface, Applied Problems of Strength and Plasticity: All-Union Intervus. Sbornik, Gor’ky: Gor’ky univer., 1984, pp. 98–104.

    Google Scholar 

  21. Maugis, D., Contact. Adhesion and rupture of elastic solids, Berlin: Springer Verlag, 2000.

    Book  Google Scholar 

  22. Capella, B. and Dietler, G., Force-Distance Curves by Atomic Force Microscopy, Surf. Sci. Rep., 1999, vol. 34, pp. 1–104.

    Article  Google Scholar 

  23. Tikhonov, A.N. and Arsenin, V.Ya., Methods of solving ill-posed problems, Moscow: Nauka, 1979.

    Google Scholar 

  24. Gantmakher, F. R., Theory of matrices, Moscow: Nauka, 1967.

    Google Scholar 

  25. Voevodin, V.V., Linear algebra, Moscow: Nauka, 1974.

    Google Scholar 

  26. Kindrachuk, V.M., Galanov, B.A., Kartuzov, V.V., and Dub, S.N., Refined model of elastic nanoindentation of half-space by the blunted Berkovich indenter accounting for tangential displacements on the contact surface, J. Mater. Sci., 2009, vol. 44, pp. 2599–2609.

    Article  CAS  Google Scholar 

  27. Kindrachuk, V.M., Galanov, B.A., Kartuzov, V.V., and Dub, S.N., On elastic nanoindentation of coated half-spaces by point indenters of non-ideal shapes, Nanotechnology, 2006, vol. 17, pp. 1104–1111.

    Article  CAS  Google Scholar 

  28. Arora, A., Marshall, D.B., Lawn, B.R., and Swain, M.V., Indentation deformation/fracture of normal and anomalous glasses, J. Non-Cryst. Solids, 1979, vol. 31, pp. 415–428.

    Article  CAS  Google Scholar 

  29. Kermouche, G., Barthel, E., Vandembroucq, D., and Dubujet, Ph., Mechanical modelling of indentation-induced densification in amorphous silica, Acta Mater., 2008, vol. 56, pp. 3222–3228.

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Frantsevich Institute of Materials Science Problems, National Academy of Sciences of Ukraine, vul. Krzhizhanovs’kogo 3, Kiev, 03680, Ukraine

    B. A. Galanov

  2. Bakul Institute for Superhard Materials, National Academy of Sciences of Ukraine, vul. Avtozavods’ka 2, Kiev, 04074, Ukraine

    S. N. Dub

Authors
  1. B. A. Galanov
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. N. Dub
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to B. A. Galanov.

Additional information

Original Russian Text © B.A. Galanov, S.N. Dub, 2017, published in Sverkhtverdye Materialy, 2017, Vol. 39, No. 6, pp. 3–24.

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Galanov, B.A., Dub, S.N. Critical comments to the Oliver–Pharr measurement technique of hardness and elastic modulus by instrumented indentations and refinement of its basic relations. J. Superhard Mater. 39, 373–389 (2017). https://doi.org/10.3103/S1063457617060016

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S1063457617060016

Keywords

Search

Navigation