Abstract
The paper addresses special features of one of finishing edge cutting operations—oblique fine diamond turning of aluminum alloys. The results of investigation of acoustic emission signals and cutting forces at various speeds and cutting edge inclination angles are given.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Nesmelov, A.F., Almaznye instrumenty v promyshlennosti (Diamond Tools in Industry), Moscow: Mashinostroenie, 1964.
Dobrovol’skii, Introduction to the mechanics of diamond microturning, Suchasne Mashinobud., 2000, no. 3–4, pp. 37–54.
Podurayev, V.N. and Gorelov, V.A., Tekhnologicheskaya diagnostika rezaniya metodom akusticheskoi emissii (In-Process Acoustic Emission Diagnostic of Cutting), Moscow: Mashinostroenie, 1988.
Naidenko, A.G. and Devin, L.N., The use of acoustic emission method for searching for diagnostic indicators during the analysis of the process of turning aluminum alloys by tools with diamond-carbide inserts, Sverkhtverdye Materialy, 2005, no. 6, pp. 77–82 [J. Superhard Mater., 2005, no. 6].
Devin, L.N., Prognozirovanie rabotosposobnosti metallorezhushchego instrumenta (Tool Life Prediction for Metal-Cutting Tools), Kiev: Naukova Dumka, 1992.
Kruglov, G.A., Obrabotka almaznymi reztsami detalei priborov (Machining of Instrument Components by Diamond Cutting Tools), Moscow: Mashinostroenie, 1968.
Novikov, N.V. (Ed.), Fizicheskie svoistva almaza: Spravochnik (Physical Properties of Diamond. Handbook), Kiev: Naukova Dumka, 1987.
Devin, L.M., Naidenko, A.G., and Nimchenko, T.V., Ukrainian Patent 23 804, Byull. no. 8, 2007.
Devin, L.N., Stakhniv, N.E., and Sulima, A.G., Automated system for measuring acoustic emission signals in the process of precision diamond turning, in Mezhdunar. nauchn.-tekhn. sem. “Sovremennye problemy proizvodstva i remonta v promyshlennosti i na transporte”. Sb. dokl. (Proc. Int. Sci.-Techn. Workshop “Present-Day Problems of Production and Repair in Industry and Transport), Svalyava, February 21–25, 2011, Kiev: ATM Ukrainy, 2011, pp. 79–81.
Devin, L.N. and Sulima, A.G., The Use of PowerGraph Software Package for the Study of Cutting Process, Promyshl. Izmer. Kontr. Avtomat. Diagn. (PiKAD), 2008, no. 3, pp. 24–26.
Stakhniv, N.E., The study of the influence of cutting conditions on machined surface roughness in turning hardened steels with cutting tools of cBN-based composite, Sverkhtverdye Materialy, 2013, no. 3, pp. 45–48 [J. Superhard Mater., 2013, no. 3, pp. 166–174].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © L.N. Devin, S.V. Rychev, 2014, published in Sverkhtverdye Materialy, 2014, Vol. 36, No. 5, pp. 45–52.
About this article
Cite this article
Devin, L.N., Rychev, S.V. Special features of oblique fine diamond turning of aluminum alloys. J. Superhard Mater. 36, 331–337 (2014). https://doi.org/10.3103/S1063457614050062
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1063457614050062