REFERENCES
Joulain, A., Audurier, V., Gadaud, P., Bonneville, J., Azin, C., Lu, Y., and Silvain, J.-F., Correlation of the mechanical properties of Cu/C composite materials with the chemistry of Cu single bond C interfacial zone, Mater. Charact., 2021, vol. 179, p. 111364. https://doi.org/10.1016/j.matchar.2021.111364
Geffroy, P.M. and Silvain, J.-F., Structural and thermal properties of hot pressed Cu/C matrix composites materials used for the thermal management of high power electronic devices, Mater. Sci. Forum, 2007, vols. 534–536, pp. 1505–1508. https://doi.org/10.4028/www.scientific.net/MSF.534-536.1505
Chu, K., Liu, Z., Jia, C., Chen, H., Liang, X., Gao, W., Tian, W., and Guo, H., Thermal conductivity of SPS consolidated Cu/diamond composites with Cr-coated diamond particles, J. Alloys Compd., 2010, vol. 490, pp. 453–458. https://doi.org/10.1016/j.jallcom.2009.10.040
Tolmachev, T.P., Pilyugin, V.P., Solodova, I.L., Ancharov, A.I., Chernyshev, E.G., Antonova, O.V., and Patselov, A.M., Mechanical formation of Cu–Ag and Cu–C powders and their thermal ageing, Vestn. Yuzh.-Ur. Gos. Univ., Ser. Metall., 2013, vol. 13, no. 1, pp. 115–121.
Sytschev, A.E., Busurin, S.M., Kovalev, D.Yu., Vrel, D., Boyarchenko, O.D., and Sachkova, N.V., Deposition of Ni–Al coatings onto copper by mechanical/heat treatment, Int. J Self-Propag. High-Temp. Synth., 2013, vol. 22, pp. 103–109. https://doi.org/10.3103/S1061386213020106
Kang, Q., He, X., Ren, S., Zhang, L., Wu, M., Guo, C., Cui, W., and Qu, X., Preparation of copper–diamond composites with chromium carbide coatings on diamond particles for heat sink applications, Appl. Therm. Eng., 2013, vol. 60, pp. 423–429, https://doi.org/10.1016/j.applthermaleng.2013.05.038
Bai, H., Xue, C., Lyu, J., Li, J., Chen, G., Yu, J., Lin, C., Lv, D., and Xiong, L., Thermal conductivity and mechanical properties of flake graphite/copper composite with a boron carbide-boron nano-layer on graphite surface, Composites, Part A, 2018, vol. 106, pp. 42–51. https://doi.org/10.1016/j.compositesa.2017.11.019
Sinha, V. and Spowart, J.E., Influence of interfacial carbide layer characteristics on thermal properties of copper–diamond composites, J. Mater. Sci., 2013, vol. 48, pp. 1330–1341. https://doi.org/10.1007/s10853-012-6878-0
Prasitskii, G.V. and Inyukhin, M.V., Parameters and techniques for the production of heat sink materials for semiconductor devices, Naukoemk. Tekhnol., 2014, vol. 15, no. 2, pp. 10–19.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by Yu. Scheck
About this article
Cite this article
Sytschev, A.E., Vadchenko, S.G., Shchukin, A.S. et al. Interaction of Cu Melt with Graphite Fibers. Int. J Self-Propag. High-Temp. Synth. 31, 51–53 (2022). https://doi.org/10.3103/S1061386222010113
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1061386222010113