Abstract
Mechanical activation of Ti-Si-C green mixtures was found to negatively affect the composition, microstructure, and properties of synthesized Ti3SiC2.
Similar content being viewed by others
References
Barsoum, M.W., The MAX phases and their properties, in Ceramics Science and Technology, Riedel, R.R. and Chen, I.-W., Eds., New York: Wiley-VCH, vol. 2, 2010, pp. 299–345.
Barsoum, M.W. and El-Raghy, T., Synthesis and characterization of a remarkable ceramic, Ti3SiC2, J. Am. Ceram. Soc., 1996, vol. 79, no. 7, pp. 1953–1956.
El-Raghy, T. and Barsoum, M.W., Processing and mechanical properties of Ti3SiC2, I: Reaction path and microstructure evolution, J. Am. Ceram. Soc., 1999, vol. 82, no. 10, pp. 2849–2854.
Sun, Z.M., Yang, S., and Hashimoto, H., Ti3SiC2 powder synthesis, Ceram. Int., 2004, vol. 30. no. 7, pp. 1873–1877.
Gao, N.F., Miyamoto, Y., and Zhang, D., On physical and thermochemical properties of high-purity Ti3SiC2, Mater. Lett., 2002, vol. 55, no. 1, pp. 61–66.
Zhang, Z.F., Sun, Z.M., Hashimoto, H., and Abe, T., Effects of sintering temperature and Si content on the purity of Ti3SiC2 synthesized from Ti/Si/TiC powders, J. Alloys Comp., 2003, vol. 352, nos. 1–2, pp. 283–289.
Zhou, Y. and Sun, Z., Temperature fluctuation/hot pressing synthesis of Ti3SiC2, J. Mater. Sci., 2000, vol. 35, no. 17, pp. 4343–4346.
Pampuch, R., Lis, J., Stobierski, L., and Tymkiewicz, M., Solid combustion synthesis of Ti3SiC2, J. Eur. Ceram. Soc., 1989, vol. 5, no. 5, pp. 283–287.
Vadchenko, S.G., Boyarchenko, O.D., Sytschev, A.E., and Sachkova, N.V., SHS joining in the Ti-Si-C system: Structure of transition layer, Int. J. Self-Prop. High-Temp. Synth., 2013, vol. 22, no. 1, pp. 46–51.
Li, S.B. and Zhai, H.X., Synthesis and reaction mechanism of Ti3SiC2 by mechanical alloying of elemental Ti, Si, and C powders, J. Am. Ceram. Soc., 2005, vol. 88, no. 8, pp. 2092–2098.
Li, J.F., Matsuki, T., and Watanabe R., Combustion reaction during mechanical alloying synthesis of Ti3SiC2 ceramics from 3Ti/Si/2C powder mixture, J. Am. Ceram. Soc., 2005, vol. 88, no. 5, pp. 1318–1320.
Naguib, M., Mashtalir, O., Carle, J., Presser, V., Lu, J., Hultman, L., Gogotsi, Yu., and Barsoum, M.W., Two-dimensional transition metal carbides, ACS Nano, 2012, vol. 6, no. 2, pp. 1322–1331.
Gogotsi, Yu., Nikitin, A., Ye, H., Zhou, W., Fischer, J.E., Yi, B., Foley, H.C., and Barsoum, M.W., Nature Mater., 2003, vol. 2, no. 9, pp. 591–594.
El Saeed, M.A., Deorsola, F.A., and Tshad, R.M., Optimization of Ti3SiC2 MAX phase synthesis, Int. J. Refr. Met. Hard Mater., 2012, vol. 35, pp. 127–131.
Bandyopadhyay, D., The Ti-Si-C system (Titanium-Silicon-Carbon), J. Phase Equil. Diffus., 2004, vol. 25, no. 5, pp. 416–420.
Meng, F., Liang, B., and Wang, M., Investigation of formation mechanism of Ti3SiC2 by self-propagating high-temperature synthesis, Int. J. Refr. Met. Hard Mater., 2013, vol. 41, pp. 152–161.
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Vadchenko, S.G., Sytschev, A.E., Kovalev, D.Y. et al. SHS of MAX compounds in the Ti-Si-C system: Influence of mechanical activation. Int. J Self-Propag. High-Temp. Synth. 23, 141–144 (2014). https://doi.org/10.3103/S106138621403011X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S106138621403011X