Abstract
Currently, various structural components have coatings of different purposes that are multilayer or gradient structures. During operation these elements are often subjected to compressive loads, as a result of which sometimes the upper part of the coating is delaminated. To analyze this process, we use a simplified model of infinite structure, namely, a modified beam approximation that takes into account two coefficients of subgrade reaction similarly to the Pasternak model. The coating is subjected to compressive prestresses. Within the framework of the previously proposed model, delamination of the coating from the elastic base is investigated. We consider a simple case when the coefficients of subgrade reaction in the deamination zone are equal to zero. At the first stage, we conduct nondimensionalization of the model under study; obtain and study transcendental equation to find the critical load; prove the existence of a solution within some region of parameter variation; construct approximate formulas for the critical load; and indicate the correlation with the model parameters. The effect of the second coefficient of subgrade reaction on the critical load value is shown. At the second stage, based on the variational formulation, the problem of infinite coating is reduced to the problem on a finite beam with modified boundary conditions. The results obtained on the basis of a simplified model are compared with a numerical solution of the transcendental equation obtained at the first stage. At the final third stage, the problem on the supercritical behavior of the coating is investigated by minimizing the non-quadratic potential energy functional. Using the Ritz method and setting power-exponential functions corresponding to an infinite coating as coordinate, a solution of the problem on supercritical deformation is constructed. A study of the solution depending on the coefficients of subgrade reaction is carried out.
Similar content being viewed by others
REFERENCES
J. W. Hutchinson and Z. Suo, “Mixed mode cracking in layered materials,” Adv. Appl. Mech. 29, 63–191 (1992).
B. Cotterell and Z. Chen, “Buckling and cracking of thin films on compliant substrates under compression,” Int. J. Fracture. 104 (2), 169–179 (2000).
H. H. Yu, M. Y. He, and J. W. Hutchinson, “Edge effects in thin film delamination,” Acta Mater.49, 93–107 (2001).
H. H. Yuand and J. W. Hutchinson, “Influence of substrate compliance on buckling delamination of thin films,” Int. J. Fracture.113, 39–55 (2002).
R. V. Goldstein, K. V. Ustinov, and A. V. Chentsov, “Estimation of the influence of the substrate compliance on the stability loss stresses of the spalled covering,” Vych. Mekh. Sploshnykh Sred 4 (3), 48–57 (2011).
N. F. Morozov, P. P. Tovstik, and T.P. Tovstik, “Continuum model of multilayer nanoplate bending and oscillation,” Fiz. Mezomekh. 19 (6), 27–33 (2016).
S. Faulhaber, C. Mercera, M.-W. Moon, et al., “Buckling delamination in compressed multiplayers on curved substrates with accompanying ridge cracks,” J . Mech. Phys. Solids 54, 1004–1028 (2006).
S. V. Panin and R. V. Goldstein, “Sliding mode of multiple cracking of thin coatings,” Phys. Mesomech. 10, 111–112 (2007).
K. B. Ustinov, “On delamination of a stipe along the boundary between two elastic layers. Part 1. Problem formulation, the case of normal crack,” Vestn. PNIPU Mech., No. 4, 226–245 (2015).
K. B. Ustinov, “On delamination of a strip along the boundary between two elastic layers. Part 2. Case of shear crack,” Vestn. PNIPU Mech., No. 2, 131–142 (2016).
K. B. Ustinov, “On delamination of a stripe along the boundary between two elastic layers. Part 3. Exact analytical solution for a particular case,” Vestn. PNIPU Mech., No. 3, 222–240 (2016).
K. B. Ustinov, “On propagation of interface crack in bi-layered strip in relation to delamination of coatings from substrates of final thickness,” Proc. Struct. Integrity 2, 3439–3446 (2016).
K. B. Ustinov, “On semi-infinite interface crack in bi-material elastic layer,” European J. Mech. A Solids 75, 56–69 (2019).
S. M. Aizikovich, A. S. Vasil’ev, and S. S. Volkov, “The axisymmetric contact problem of the indentation of a conical punch into a half-space with a coating inhomogeneous in Depth,” J. Appl. Math. Mech.79, 500–505 (2015).
A.O. Vatul’yan, E.L. Kossovich and D.K. Plotnikov, “Some specific characteristics of indentation of cracked layered structures,” Mech. Solids 52 (4), 429–434 (2017).
V. D. Kurguzov, “Modeling of thin film spall in compression,” Vych. Mekh. Sploshnykh Sred 7 (1), 91–99 (2014).
N. S. Astapov and V. M. Kornev, “Postbuckling behavior of an ideal bar on an elastic foundation,” J. Appl. Mech. Tech. Phys. 35 (2), 286–296 (1994).
N. S. Astapov, A. G. Demeshkin, and V. M. Kornev, “Buckling of a bar on an elastic base,” J. Appl. Mech. Tech. Phys. 35 (5), 739–744 (1994).
G. M. Fikhtengolts, Fundamentals of Mathematical Analysis (Nauka, Moscow, 1968), Vol. 1 [in Russian].
P. L. Pasternak, New Method for Calculation of Foundation on the Elastic Basement (Gosstroiizdat, Moscow, 1954) [in Russian].
Funding
This study was supported by the Russian Science Foundation, project no. 18-11-00069
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by A. A. Borimova
About this article
Cite this article
Vatulyan, A.O., Morozov, K.L. Investigation of Delamination from an Elastic Base Using a Model with Two Coefficients of Subgrade Reaction. Mech. Solids 55, 207–217 (2020). https://doi.org/10.3103/S002565442002017X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S002565442002017X