Abstract
Methods for calculating the creep strain of beams or plates in compression were considered by several authors (e.g., see [1–3]).
The goal of calculations is to determine the function describing the deflection increase and the time in which the deflection attains the maximum admissible value.
In this paper, we consider the creep strain with regard to the common action of compression and bending stresses.
Similar content being viewed by others
References
Yu. N. Rabotnov, Creep of Structural Members (Nauka, Moscow, 1966) [in Russian].
K. I. Romanov, “Investigation of the Creep Buckling of aRod on the Basis of the Calladine–DruckerTheorem,” Izv. Ross. Akad. Nauk. Mekh. Tverd. Tela, No. 4, 157–161 (1999) [Mech. Solids (Engl. Transl.) 34 (4), 132–135 (1999)].
K. I. Romanov, “Critical Time in the Theory of Buckling of Plates Subject to Creep,” Izv. Ross. Akad. Nauk. Mekh. Tverd. Tela, No. 5, 114–120 (2004) [Mech. Solids (Engl. Transl.) 39 (5), 91–96 (2004)].
A. M. Lokoshchenko, Modeling of Creep and Long-Time Strength of Metals (Izdat. Mosk. Gos. Industr. Univ, Moscow, 2007) [in Russian].
M. Ya. Brovman, “On Creep Deformation in Longitudinal Bending of Beams,” Izv. Ross. Akad. Nauk. Mekh. Tverd. Tela, No. 4, 121–129 (2014) [Mech. Solids (Engl. Transl.) 49 (4), 461–467 (2014)].
A. P. Arshakuni, A. M. Lokoshchenko, V. N. Kiselevskii, et al., Laws of Creep and Long-Term Strength, Reference Book, Ed. by S. A. Shesterikov (Mashinostroenie, Moscow, 1983) [in Russian].
M. Ya. Brovman, “On Functional Equations Characterizing Creep Deformation,” Izv. Ross. Akad. Nauk. Mekh. Tverd. Tela, No. 4, 97–108 (2012) [Mech. Solids (Engl. Transl.) 47 (4), 454–462 (2012)].
M. Ya. Brovman, “Experimental Investigation of Creep at High Temperatures,” Probl. Prochn., No. 8, 77–79 (1979) [Strength ofMaterials (Engl. Transl.). 11 (8), 887–890 (1979)].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M.Ya. Brovman, 2017, published in Izvestiya Akademii Nauk, Mekhanika Tverdogo Tela, 2017, No. 1, pp. 92–98.