Abstract
The paper deals with the problem of determining the stress-strain state near the boundary of a one-layer strip made of an orthotropic material subjected to a self-balanced load applied at the end of the strip (Saint-Venant effect, boundary effect, and boundary layer). A comparative analysis of two methods for determining the boundary effect is carried out. The first method, i.e., the solution in stresses (with respect to σ y ), was developed by L. A. Agalovyan and gives good results of one-layer strips. The second approach, i.e., the solution in displacements, was developed by the author, and its results for the one-layer strip practically coincides with the solution in stresses. The obtained results were also verified by FEM. But the solution of the problem of elasticity in displacements is much more promising when analyzing multilayer strips.
Similar content being viewed by others
References
L. A. Agalovyan, Asymptotic Theory of Anisotropic Plates and Shells (Nauka, Moscow, 1997) [inRussian].
Yu. I. Butenko, “Study of the Boundary Layer in a Laminated Plate,” Izv. Akad. Nauk. Mekh. Tverd. Tela, No. 4, 123–141 (2007) [Mech. Solids (Engl. Transl.) 42 (4), 603–618 (2007)].
Yu. I. Butenko, “Determining the Boundary Layers in the Plane Problem for Three-Layer Strips. Part 1,” Izv. Akad. Nauk. Mekh. Tverd. Tela, No. 4, 58–76 (2008) [Mech. Solids (Engl. Transl.) 43 (4), 571–585 (2008)].
Yu. I. Butenko, “Determining the Boundary Layers in the Plane Problem for Three-Layer Strips. Part 2,” Izv. Akad. Nauk. Mekh. Tverd. Tela, No. 1, 136–146 (2009) [Mech. Solids (Engl. Transl.) 44 (1), 105–113 (2009)].
Yu. I. Butenko, Boundary Effects in Two- and Three-Layer Strips and Plates (Izdat. Kazan Univ., Kazan, 2008) [in Russian].
Yu. I. Butenko, “Boundary Effects inMultilayer Strips,” in Problems of NonlinearMechanics ofDeformable Solids. Second International Conference (KGU, Kazan, 2009), pp. 73–76 [in Russian].
Yu. I. Butenko, “Boundary Effects in Multilayer Strips,” Izv. Kazan. Gos. Arkhit. -Stroit. Univ., No. 2 (12), 103–112 (2009).
Yu. M. Artyukhin, N. G. Gur’yanov, and L. M. Kotlyar, System “Mathematica-4. 0” and Its Applications in Mechanics (Izdat. KamPI, Kazan–Naberezhnye Chelny, 2002) [in Russian].
V. V. Vasiliev and S. A. Lur’e, “Plane Problem of Elasticity for an Orthotropic Cantilever Strip,” Izv. Akad. Nauk SSSR. Mekh. Tverd. Tela, No. 5, 125–135 (1984) [Mech. Solids (Engl. Transl.)].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.I. Butenko, 2016, published in Izvestiya Akademii Nauk, Mekhanika Tverdogo Tela, 2016, No. 4, pp. 118–131.
About this article
Cite this article
Butenko, Y.I. Specific characteristics of numerical determination of the boundary effect stress-strain state for an orthotropic strip. Mech. Solids 51, 472–483 (2016). https://doi.org/10.3103/S0025654416040099
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0025654416040099