Abstract
The creation of general-purpose gear systems with hardened Novikov gears of relatively low precision is considered. By solving three-dimensional elastic-contact problems and modeling, the replacement of expensive high-precision involute gears in the final stage of general-purpose gear systems by less expensive hardened Novikov gears of lower precision is shown to be expedient. Preliminary calculations of prospective high-precision Novikov gears are presented. They offer considerable advantages over their involute counterparts.
Similar content being viewed by others
REFERENCES
Novikov, M.L., Zubchatye peredachi s novym zatsepleniem (Gears with New Gearing), Moscow: Voen.-Vozdushn. Inzh. Akad. im. N.E. Zhukovskogo, 1958.
Veretennikov, V.Ya., Korotkin, V.I., and Boldyreva, L.G., Analysis of Novikov nitrocemented cylindrical gears for general purpose gearboxes, Vestn. Mashinostr., 1984, no. 6, pp. 21–23.
GOST (State Standard) 30224–96: Novikov Cilindrical Gears with Hardness of Teeth Surface not Less 35 HRC, Basic Rack, Moscow: Izd. Standartov, 1996.
Korotkin, V.I., Onishkov, N.P., and Kharitonov, Yu.D., Novikov Gearing: Achievements and Developments (Mechanical Engineering Theory and Applications), New York: Nova Science, 2011.
Korotkin, V.I., Evaluation of efficiency of longitudinal surface modification teeth of Novikov spur gears with standard basic rack profile according to GOST 30224–96, Spravochnik. Inzh. Zh., 2015, no. 12, pp. 14–20.
Korotkin, V.I. and Onishkov, N.P., The efficiency due to the increase module of Novikov gearing with standard basic rack profiles, Tekhn. Mashinostr., 2015, no. 2, pp. 37–44.
GOST (State Standard) 14186–69: Novikov Spur Gears. Modules, Moscow: Izd. Standartov, 1969.
Roslivker, E.G., Durability and rigidity of gear teeth with Novikov gearing, in Prochnost’ korpusov sudov i nadezhnost’ detalei mashin (Durability of Ship Hulls and Reliability of Machine Parts), Tr. Gor’k. Inst. Inzh. Vodn. Transp., Gorkiy: Gor’k. Inst. Inzh. Vodn. Transp., 1975, no. 138, pp. 50–96.
Korotkin, V.I. and Gazzaev, D.A., Simulation of contact interaction of gear wheel teeth of novikov gearing, Vestn. Mashinostr., 2014, no. 11, pp. 31–35.
Korotkin, V.I. and Gazzaev, D.A., Bending intensity of teeth under the influence of a distributed load in different phases of Novikov gearing, J. Mach. Manuf. Reliab., 2014, vol. 43, no. 2, pp. 104–111.
Korotkin, V.I., Gazzaev, D.A., and Onishkov, N.P., Phase movement of the teeth of the wheels of Novikov spur gears, Tekhn. Mashinostr., 2014, no. 2, pp. 33–38.
Korotkin, V.I., Comparative analysis of teeth strength and load capacity of Novikov spur gears and involute gears, Vestn. Mashinostr., 2016, no. 9, pp. 38–43.
GOST (State Standard) 21354–87: Cylindrical Involute Gears of External Engagement. Strength Calculation, Moscow: Izd. Standartov, 1988.
Korotkin, V.I., Tsilindricheskie evol’ventnye zubchatye peredachi s lokal’nym kontaktom zob’ev nagruzochnoi sposobnosti (Spur Involute Gears with Local Teeth Contact of higher Loading Capacity), Rostov-on-Don: Yuzh. Fed. Univ., 2013.
Reduktory i motor-reduktory. Katalog (Gearboxes and Gearmotors: Catalogue), Moscow: Vseross. Nauchno-Issled. Inst. Inf. Tekh.-Ekon. Issled. Mashinostr. Robototekh., 1987, part 1.
ACKNOWLEDGMENTS
Financial support was provided by the Russian Ministry of Education and Science (project 9.4726.2017/8.9).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Korotkin, V.I. Hardened Novikov Gears as the Last Stage of General-Purpose Gear Systems. Russ. Engin. Res. 38, 968–973 (2018). https://doi.org/10.3103/S1068798X18120110
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18120110