Abstract
Thickening is used during two primary mineral processing operations: water removal and desliming. During water removal, the pulp density is increased through the injection of flocculants. These flocs settle and create a dense pulp while clarified water is removed through the overflow. During desliming, fine particles are removed through the overflow. Desliming can also be used as a mineral separation process known as selective flocculation-dispersion, where valuable minerals are flocculated and gangue minerals remain dispersed and exit through the overflow.
There are many ways to analyze thickener performance on a laboratory scale, but these analyses often do not correlate well with full-scale performance. Some pilot-scale systems have been designed using a semicontinuous approach, but the amount of material required to perform their tests can make semicontinuous pilot thickeners impractical for most applications. This paper focuses on the design and optimization of a continuous pilot-scale deslime thickener that requires minimal material to operate. The design, optimization strategy, and an example study of reagent selection are demonstrated.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
ASTM International, 2011, “E1070-11 Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry,” Conshohocken, PA.
Bolen, J., 2014, “Modern air pollution control for iron ore induration,” Minerals & Metallurgical Processing, Vol. 31, No. 2, pp. 103–114.
Braun, C., 2013, Laboratory thickener design suggestions, personal communication, Aug. 13, 2013.
Carlson, J.J., and Kawatra, S.K., 2008, “Effect of particle shape on the filtration rate in an industrial iron ore processing plant,” Minerals & Metallurgical Processing, Vol. 25, No. 3, pp. 165–168.
Carlson, J.J., and Kawatra, S.K., 2011, “Effects of CO2 on the zeta potential of hematite,” International Journal of Mineral Processing, Vol. 98, No. 1–2, pp. 8–14, https://doi.org/10.1016/j.minpro.2010.08.005.
Carlson, J.J., and Kawatra, S.K., 2013, “Factors affecting zeta potential of iron oxides,” Mineral Processing and Extractive Metallurgy Review, Vol. 34, No. 5, pp. 269–303.
Coe, H.S., and Clevenger, G.H., 1916, “Methods for determining the capacity of slime-settling tanks,” Transactions of the American Institute of Mining Engineers, AIME, New York, NY, Vol. 58, p. 102.
Halt, J.A., 2014, “Increasing the preheat strength of cornstarch-bonded pellets,” Minerals & Metallurgical Processing, Vol. 31, No. 3, pp. 179.
Halt, J.A., and Kawatra, S.K., 2014, “Review of organic binders for iron ore concentrate agglomeration,” Minerals & Metallurgical Processing, Vol. 31, No. 2, pp. 73–94.
Halt, J.A., Nitz, M.C., Kawatra, S.K., and Dube, M., 2014, “Iron ore pellet dustiness Part I: Factors affecting dust generation,” Mineral Processing and Extractive Metallurgy Review, Vol. 36, No. 4, pp. 258–266, https://doi.org/10.1080/08827508.2014.928876.
Haselhuhn, H.J., 2012, “Water chemistry effects on the zeta potential of concentrated hematite ore,” Minerals & Metallurgical Processing, Vol. 29, No. 2, pp. 135–136.
Haselhuhn, H.J., 2013, “Dispersant adsorption and effects on settling behavior of iron ore,” Minerals & Metallurgical Processing, Vol. 30, No. 3, pp. 188–189.
Haselhuhn, H.J., Carlson, J.J., and Kawatra, S.K., 2012, “Water chemistry analysis of an industrial selective flocculation dispersion hematite ore concentrator plant,” International Journal of Mineral Processing, Vol. 102–103, pp. 99–106, https://doi.org/10.1016/j.minpro.2011.10.002.
Haselhuhn, H.J., Swanson, K.P., and Kawatra, S.K., 2012b, “The effect of CO2 sparging on the flocculation and filtration rate of concentrated hematite slurries,” International Journal of Mineral Processing, Vol. 112–113, pp. 107–109, https://doi.org/10.1016/j.minpro.2012.04.006.
Kawatra, S.K., and Halt, J.A., 2011, “Binding effects in hematite and magnetite concentrates,” International Journal of Mineral Processing, Vol. 99, No. 1–4, pp. 39–42, https://doi.org/10.1016/j.minpro.2011.03.001.
Kynch, G.J., 1952, “A theory of sedimentation,” Transactions of the Faraday Society, Vol. 48, pp. 166–176, https://doi.org/10.1039/tf9524800166.
Laros, T., Slottee, S., and Baczek, F., 2002, “Testing, Sizing, and Specifying Sedimentation Equipment,” Mineral Processing Plant Design, Practice, and Control, A.L. Mular, D.N. Halbe and D.J. Barratt, eds., Society for Mining, Metallurgy & Exploration Inc., Englewood, CO, Vol. 2, pp. 1295–1312.
Liu, S., Zhau, Y., Wang, W., and Wen, S., 2014, “Beneficiation of a low-grade, hematite-magnetite ore in China,” Minerals & Metallurgical Processing, Vol. 31, No. 2, pp. 136–142.
Ma, X., 2011a, The Dispersion of Kaolinite, Iron Ore, The Australian Institute of Mining and Metallurgy, Perth, Australia.
Ma, X., 2011b, “Effect of a low-molecular-weight polyacrylic acid on the coagulation of kaolinite particles,” International Journal of Mineral Processing, Vol. 99, No. 1–4, pp. 17–20, https://doi.org/10.1016/j.minpro.2011.01.002.
Manouchehri, H.R., 2014, “Pyrrhotite flotation and its selectivity against pentlandite in the beneficiation of nickeliferous ores: An electrochemistry perspective,” Minerals & Metallurgical Processing, Vol. 31, No. 2, pp. 115–125.
Sandvik, K.L., and Larsen, E., 2014, “Iron ore flotation with environmentally friendly reagents,” Minerals & Metallurgical Processing, Vol. 31, No. 2, pp. 95–102.
Semberg, P., Andersson, C., and Bjorkman, B., 2014, “Interaction between iron oxides and olivine in magnetite pellets during reduction at 500°–1,300°C,” Minerals & Metallurgical Processing, Vol. 31, No. 2, pp. 126–135.
Siirak, J., and Hancock, B.A., 1988, “Progress in developing a flotation phosphorus reduction process at the tilden iron ore mine,” XVI International Mineral Processing Congress, Elsevier, Stockholm, Sweden, pp. 1393–1404.
Stroop, R., 2013, Dispersant use suggestions, personal communication, Oct. 20, 2013.
Talmage, W.P., and Fitch, E.B., 1955, “Determining thickener unit areas,” Industrial & Engineering Chemistry, Vol. 47, No. 1, pp. 38–41, https://doi.org/10.1021/ie50541a022.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Haselhuhn, H.J., Kawatra, S.K. Design of a continuous pilot-scale deslime thickener. Mining, Metallurgy & Exploration 34, 1–9 (2017). https://doi.org/10.19150/mmp.7243
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.19150/mmp.7243