Abstract
As a widely accepted concept, bitumen consists of four fractions that can be distinguished by their polarity. Highly polar asphaltene micelles are dispersed in a viscous phase of saturates, aromatics and resins (maltene phase). Different concentrations of asphaltenes in the bitumen result in a range of mechanical response properties. In an interdisciplinary study the impact of the maltene phase and asphaltenes on the linear viscoelastic behavior and the microstructure of bitumen were analyzed by creep recovery testing in a DSR and by atomic force microscopy (AFM). Therefore, bitumen was separated into the maltene and asphaltene fractions and artificial bitumen samples with different, pre-defined asphaltene concentrations were produced and investigated. It was found that the artificially produced, precipitated bitumen samples can be regarded as a representative, bitumen-like material in terms of mechanical behavior and microstructure. Asphaltenes play an important role in the typical viscoelastic behavior of bitumen being mainly responsible for stiffness and elasticity. Also, their concentration appears to be correlated to the occurrence and shape of the bee-like inclusions which can be typically observed by AFM.
Similar content being viewed by others
References
OECD (2013) Spending on infrastructure 1995–2011—trends, policies, data. International Transport Forum of the OECD, Paris, p 58
CEN (2012) EN 12597: Bitumen und Bitumenhaltige Bindemittel—Terminologie. CEN, Brussels, p 18
Merino-Garcia D et al (2010) Petrophase 2009 panel discussion on standardization of petroleum fractions. Energy Fuels 24(4):2175–2177
ASTM (2001) ASTM D 4124-01: standard test methods for separation of asphalt into four fractions. ASTM, Philadelphia, p 6
Lesueur D (2009) The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification. Adv Colloid Interface Sci 145(1–2):42–82
Corbett LW (1969) Composition of asphalt based on generic fractionation, using solvent deasphaltening, elution-adsorption chromatography, and densimetric characterization. Anal Chem 41:3
Read J, Whiteoak D (2003) The shell bitumen handbook, 5th edn. Thomas Telford Ltd, London, p 464
Solaimany Nazar AR, Rahimi H (2009) Investiagtion on agglomeration-fragmentation processes in colloidal asphaltene suspensions. Energy Fuels 23(2):8
Sheu EY (1996) Physics of asphaltene micelles and microemulsions—theory and experiment. J Phys 1996(8):17
Fawcett A, McNally T (2003) Polystyrene and asphaltene micelles within blends with a bitumen of an SBS block copolymer and styrene and butadiene homopolymers. Colloid Polym Sci 281(3):203–213
Eyssautier J et al (2012) Organization of asphaltenes in a vacuum residue: a small-angle X-ray scattering (SAXS)–viscosity approach at high temperatures. Energy Fuels 26(5):2696–2704
Pollack SS, Yen TF (1970) Structural studies of asphaltics by X-ray small angle scattering. Anal Chem 42(6):7
Tripadus V et al (2004) The study of diffusive motion in bitumen compounds by quasielastic neutron scattering. Phys B 350(1–3):E455–E458
Yarranton HW et al (2013) On the size distribution of self-associated asphaltenes. Energy Fuels 27(9):24
Haji-Akbari N et al (2013) A unified model for aggregation of asphaltenes. Energy Fuels 27(5):2497–2505
Durand E et al (2010) Effect of chemical composition on asphaltenes aggregation. Energy Fuels 24(2):1051–1062
Mikula RJ, Munoz VA (2000) Characterization of emulsions and suspensions in the petroleum industry using cryo-SEM and CLSM. Colloids Surf A 174:14
Bearsley S, Forbes A, Haverkamp RG (2004) Direct observation of the apshaltene structure in paving-grade bitumen using confocal laser-scanning microscopy. J Microsc 215(2):7
Forbes A et al (2001) Studies of the microstructure of polymer-modified bitumen emulsion using confocal laser scanning microscopy. J Microsc 204(3):252–257
Handle F, Füssl J, Neudl S, Großegger D, Eberhardsteiner L, Hofko B, Blab R, Grothe H (2014) The bitumen microstructure: a fluorescent approach. Mater Struct. doi:10.1617/s11527-014-0484-3
Seifried CM, Crawshaw J, Boek ES (2013) Kinetics of asphaltene aggregation in crude oil studied by confocal laser-scanning microscopy. Energy Fuels 27(4):1865–1872
Soenen H et al (2013) Laboratory investigation of bitumen based on round robin DSC and AFM tests. Mater Struct 47(7):16
Yu X et al (2013) A systematic AFM-based method to measure adhesion differences between micron-sized domains in asphalt binders. Fuel 113:443–447
Champion-Lapalu L et al (2002) Cryo-scanning electron microscopy: a new tool for interpretation of fracture studies in bitumen/polymer blends. Energy Fuels 16(1):143–147
Loeber L et al (1996) New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopy. J Microsc 182(1):7
Lyne ÅL et al (2013) Surface wrinkling: the phenomenon causing bees in bitumen. J Mater Sci 48(20):6970–6976
Lu X et al (2005) Wax morphology in bitumen. J Mater Sci 40:8
Redelius P (2011) Asphaltenes in bitumen, what they are and what they are not. Road Mater Pavement Des 10(1):18
Sourty ED et al (2011) The microstructure of petroleum vacuum residue films for bituminous concrete: a microscopy approach. J Microsc 241(2):132–146
Lackner R et al (2004) Multiscale modeling as the basis for reliable predictions of the behavior of multi-composed materials. Prog Eng Comput Technol 8:153–187
Lackner R et al (2005) Is low-temperature creep of asphalt mastic independent of filler shape and mineralogy? Arguments from multiscale analysis. J Mater Civ Eng 17(5):485–491
Aigner E, Lackner R, Pichler C (2009) Multiscale prediction of viscoelastic properties of asphalt concrete. J Mater Civ Eng 21:771–780
Pichler C, Lackner R (2009) Upscaling of viscoelastic properties of highly-filled composites: investigation of matrix-inclusion type morphologies with power-law viscoelastic material response. Compos Sci Technol 69:2410–2420
Pichler C, Lackner R, Aigner E (2012) Generalized self-consistent scheme for upscaling of viscoelastic properties of highly-filled matrix-inclusion composites—application in the context of multiscale modeling of bituminous mixtures. Compos B 43:457–464
Eberhardsteine L, Füssl J, Hofko B, Handle F, Hospodka M, Blab R, Grothe H (2014) Influence of asphaltene content on mechanical bitumen behavior: experimental investigation and micromechanical modeling. Mater Struct 1–14. doi:10.1617/s11527-014-0383-7
Eberhardsteiner L, Füssl J, Hofko B, Handle F, Hospodka M, Blab R, Grothe H (2015) Towards a microstructural model of bitumen aging behavior. Int J Pavement Eng. doi:10.1080/10298436.2014.993192
CEN (2007) EN 1426: bitumen and bituminous binders—determination of needle penetration. CEN, Brussels
CEN (2007) EN 1427: bitumen and bituminous binders—determination of the softening point—ring and ball method. CEN, Brussels
CEN (2005) EN 14770: bitumen and bituminous binders—determination of complex shear modulus and phase angle—dynamic shear rheometer (DSR). CEN, Brussels
CEN (2005) EN 14771: bitumen and bituminous binders—determination of the flexural creep stiffness—bending beam rheometer (BBR). CEN, Brussels
Eaton PW (2010) Atomic force microscopy. Oxford University Press, Oxford
Garcıá R, Pérez R (2002) Dynamic atomic force microscopy methods. Surf Sci Rep 47(6–8):197–301
Nečas D, Klapetek P (2011) Gwyddion: an open-source software for SPM data analysis. Cent Eur J Phys 10(1):181–188
Masson JF, Leblond V, Margeson J (2006) Bitumen morphologies by phase-detection atomic force microscopy. J Microsc 221(1):17–29
Nahar S et al (2013) First observation of blending-zone morphology at interface of reclaimed asphalt binder and virgin bitumen. Transp Res Rec 2370(1):1–9
Nahar SN et al. (2014) Turning back time: rheological and microstructural assessment of rejuvenated bitumen. TRB 93rd annual meeting compendium of papers, 1–17
Nahar SN et al (2013) Temperature and thermal history dependence of the microstructure in bituminous materials. Eur Polym J 49(8):1964–1974
Schmets A et al (2010) On the existence of wax-induced phase separation in bitumen. Int J Pavement Eng 11(6):555–563
Pauli AT et al (2001) Atomic force microscopy investigation of SHRP asphalts. Abstr Pap Am Chem Soc 221:U220
Stangl K, Jäger A, Lackner R (2006) Microstructure-based identification of bitumen performance. Road Mater Pavement Des 7(sup1):111–142
Merino-Garcia D et al (2010) Petrophase 2009 panel discussion on standardization of petroleum fractions. Energy Fuels 24(4):2175–2177
Acknowledgments
The authors would like to thank the Austrian Research Promotion Agency (FFG) for funding part of the presented research within the research project “Oekophalt”, as well as to Mr. Thomas Riedmayer for running the mechanical bitumen tests for this study.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hofko, B., Eberhardsteiner, L., Füssl, J. et al. Impact of maltene and asphaltene fraction on mechanical behavior and microstructure of bitumen. Mater Struct 49, 829–841 (2016). https://doi.org/10.1617/s11527-015-0541-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1617/s11527-015-0541-6