Abstract
NiAl, YCu and TiAl polycrystals with B2 and L10 structure, respectively, have been deformed by high pressure torsion (HPT) at temperatures between 20°C and 500°C at a hydrostatic pressure of 8 GPa to high shear strains. Local texture measurements were done by diffraction of high-energy synchrotron radiation and X-ray microdiffraction. In addition, the microstructure was analyzed by electron backscatter diffraction (EBSD). Besides typical shear components an oblique cube component is observed with quite large rotations about the transverse direction. Based on the temperature dependence of this component as well as on microstructure investigations it is concluded that it is formed by discontinuous dynamic recrystallization. The influence of high pressure on recrystallization of intermetallics at low temperatures is discussed.
Similar content being viewed by others
References
R. Pippan, “High-pressure Torsion — Features and Applications”, Bulk Nanostructured Materials, ed. M.J. Zehetbauer and Y.T. Zhu (Wiley VCH, 2009) p. 217.
B. Klöden, C.-G. Oertel, E. Rybacki and W. Skrotzki, J. Eng. Mater. Technol., 131, 011101–1–9 (2009).
C.-G. Oertel, R. Schaarschuch, G.H Cao, H.N. Tian, J. Freudenberger, H.-G. Brokmeier and W. Skrotzki. Scripta Mater. 65, 779–782 (2011).
G.H. Cao, B. Klöden, E. Rybacki, C.-G. Oertel and W. Skrotzki, Mater. Sci. Eng. 483-484, 512–516 (2008).
C. Randau, U. Garbe and H.-G. Brokmeier, J. Appl. Cryst. 44, 641–646 (2011).
LaboTex Version 3.0.24
C. Tränkner, R. Chulist, W. Skrotzki, B. Beausir, T. Lippmann, J. Horky and M. Zehetbauer, IOP Conf. Ser.: Mater. Sci. Eng. 63, 012154 (2014).
C. Tränkner, R. Chulist, W. Skrotzki, T. Lippmann, J. Horky and M. Zehetbauer, IOP Conf. Ser.: Mater. Sci. Eng., submitted (2014).
W. Skrotzki, A. Eschke, B. Jonas, T. Ungar, L. Toth, Yu. Ivanisenko and L. Kurmanaeva, Acta Mater. 61, 7271–7284 (2013).
Acknowledgements
The help of T. Reiter with sample cutting is gratefully acknowledged. Beamtime at DESY was supported by Helmholtz-Zentrum Geesthacht (HZG). Part of this work was supported by the European Union and the Free State of Saxony within the framework of the “European Centre for Emerging materials and Processes (ECEMP), contract number 100111842.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tränkner, C., Pukenas, A., Horky, J. et al. Peculiarities in the Texture Formation of Intermetallic Compounds Deformed by High Pressure Torsion. MRS Online Proceedings Library 1760, 43–48 (2014). https://doi.org/10.1557/opl.2014.963
Published:
Issue Date:
DOI: https://doi.org/10.1557/opl.2014.963