Abstract
The underpinning problems of deep-water facies still remain unresolved. (1) The Tb, Tc, and Td divisions of the turbidite facies model, with traction structures, are an integral part of the “Bouma Sequence” (Ta, Tb, Tc, Td, Te). However, deposits of thermohaline contour currents, wind-driven bottom currents, deep-marine tidal currents, and baroclinic currents (internal waves and tides) also develop discrete rippled units, mimicking Tc. (2) The application of “cut-out” logic of sequences, which was originally introduced for the “Bouma Sequence”, with sharp basal contacts and sandy divisions containing well-developed traction structures, to muddy contourites with gradational basal contacts and an absence of well-developed traction structures is incongruent. (3) The presence of five internal divisions and hiatus in the muddy contourite facies model is in dispute. (4) Intersection of along slope contour currents with down slope sediment-gravity flows, triggering hybrid flows, also develops traction structures. (5) The comparison of genuine hybrid flows with down slope flow transformation of gravity flows is inconsistent with etymology of the term “hybrid”. (6) A reexamination of the Annot Sandstone at the Peira Cava type locality in SE France fails to validate either the orthodoxy of five internal divisions of the “Bouma Sequence” or their origin by turbidity currents. For example, the “Ta” division is composed of amalgamated units with inverse grading and floating mudstone clasts, suggesting a mass-transport deposit (MTD). The “Tb” and “Tc” divisions are composed of double mud layers and sigmoidal cross bedding, respectively, which suggest a tidalite origin. (7) Although it was reasonable to introduce a simplistic “Bouma Sequence” in 1962, at a time of limited knowledge on deep-water processes, it is obsolete now in 2021 to apply this model to the rock record amid a wealth of new knowledge. (8) The disconnect between 12 observed, but questionable, modern turbidity currents and over 10,000 interpreted ancient turbidites defies the doctrine of uniformitarianism. This disconnect is attributed to routine application of genetic facies models, without a pragmatic interpretation of empirical data. (9) A suggested solution to these problems is to interpret traction structures in the sedimentary record pragmatically on the basis of empirical field and experimental evidence, without any built-in bias using facies models, such as the “Bouma Sequence”. (10) Until reliable criteria are developed to distinguish traction structures of each type of bottom currents based on uniformitarianism, a general term “BCRS” (i.e., bottom-current reworked sands) is appropriate for deposits of all four kinds of bottom currents.
Similar content being viewed by others
1 Introduction
The geologic importance of downslope and alongslope process and their deposits in deep-water environments was discussed in detail using 540 case studies by Shanmugam (2021a). One of the important lessons learned from these modern and ancient case studies was that intersection of downslope and alongslope processes on continental margins is common (Fig. 1). As a consequence, bottom-current reworked sands (BCRS) constitute an important deep-water facies (Hsü 1964; Hubert 1964; Klein 1966, 1975; Hollister 1967; Mutti, 1992; Shanmugam et al. 1993, 2009; Stanley 1993; Ito 2002; Shanmugam 2006, 2008, 2012a, 2021a; Martin-Chivelet et al. 2008; Mutti and Carminatti 2011; de Castro et al. 2020; Fonnesu et al. 2020; Fuhrmann et al. 2020, among others). However, recognition of BCRS has been immersed in controversies. The main reason is that intervals of BCRS with traction structures may also be interpreted as turbidites based on the application of the turbidite facies model (Bouma 1962), which is popularly known as the “Bouma Sequence”. Although turbidites, contourites, tidalites, baroclinites, and hybridites are distinctly different depositional facies, they all have one thing in common, they all exhibit traction structures. So, how to distinguish one facies from the other? This problem has never been addressed to date. Therefore, the primary objective of this review is to identify key problem areas that pose direct challenges in distinguishing individual depositional facies. I also try to offer possible solutions, when conditions permitting.
This review is based on global case studies from the North Atlantic, Mid-Pacific Mountains, Gulf of Cadiz, Gulf of Mexico, Offshore Nigeria, Bay of Bengal, and the Annot Sandstone in the Maritime Alps that served as the type locality for the development of the “Bouma Sequence”.
2 History and methods
In proceeding with this review, it is necessary to establish a historical basis for my skepticism of the Bouma Sequence (Bouma 1962) and to list critical core, outcrop, and experimental studies that I carried out in collaboration with others as a student, as a Mobil employee, and as a consultant (Shanmugam 2021a). I described deep-water strata using conventional cores and outcrops (1:20 to 1:50 scale), which include 32 deep-water sandstone petroleum reservoirs worldwide, totaling over 10,000 m in cumulative thickness during 1974–2011. The basic premise in the following discussion is a combination of process sedimentology and physical oceanography.
-
During my tenure with Mobil Research and Development Corporation in Dallas, Texas (1978–2000), both Sanders (1965) and Klein (1966) had immense influence on my thinking of deep-water processes and the Bouma Sequence (Shanmugam 1997, 2000a, b, 2018a; Shanmugam and Moiola 1995).
-
Since 1965, my skepticism of the Bouma Sequence and the role of turbidity currents as a major depositional mechanism began to take roots. This skepticism coupled with early research by Hsü (1964), Hubert (1964), Klein (1966), Hollister (1967), Van der Lingen (1969), and my own global studies of case studies, have gradually diverted my attention away from the Bouma Sequence and turbidity currents, and towards bottom currents.
-
Shanmugam’s paper “High-density turbidity currents: are they sandy debris flows?” published in the Journal of Sedimentary Research in 1996, has achieved the status of the single most cited paper in sedimentological research published in three world-renowned periodicals -- Journal of Sedimentary Research, Sedimentology, and Sedimentary Geology -- during the survey period of 1996–2003 (Source: International Association of Sedimentologists Newsletter, August 2003) (Racki 2003).
JSR Editorial Board (1996): Editor: John B. Southard. Associate Editor: G. A. Smith. Reviewers: D. J. W. Piper and G. Postma. This manuscript received mixed reviews, however, the editor decided to publish. Mobil Reviewers: R. J. Moiola, J. E. Damuth, and R. B. Bloch.
2.1 Ouachita flysch, USA
The Pennsylvanian Jackfork Group in the Ouachita Mountains of Arkansas and Oklahoma has conventionally been interpreted by many workers (e.g., Briggs and Cline 1967) as a classic flysch sequence dominated by turbidites in a submarine fan setting. In a detailed field and laboratory study of the Ouachita flysch, representing a ten-year research, however, we have concluded that normal size grading and Bouma Sequences, indicative of turbidite deposition, are essentially absent in these sandstone beds (Shanmugam and Moiola 1995). These beds are mass-transport deposits (MTD) and bottom-current reworked sands (BCRS). Our (Shanmugam and Moiola 1995) controversial reinterpretation had resulted in five lively discussions by some of the leading authorities in the field, which included the following researchers:
-
A. H. Bouma, M.B. DeVries, and C.G. Stone, (1997)
-
J. L. Coleman, (1997)
-
A.E. D’Agostino and D.W. Jordan (1997)
-
D.R. Lowe (1997)
-
R.M. Slatt, P. Weimer, and C.G. Stone (1997)
We promptly responded to all criticisms (Shanmugam and Moiola 1997). These academic discussions had resulted in 42 printed pages in the AAPG Bulletin. It is worth noting that no other paper in the AAPG Bulletin history (1917–present) has generated this much controversy.
2.2 Basin-floor fans, North Sea
In the AAPG Bulletin, Shanmugam et al. (1995) published an article entitled “Basin-floor fans in the North Sea, sequence stratigraphic models vs. sedimentary facies”. This regional study was based on rigorous examination of nearly 12,000 ft (3658 m) of conventional slabbed core from Paleogene and Cretaceous deep-water sandstone reservoirs. These cores represent 50 wells in 10 different petroleum fields in the North Sea and adjacent regions. These reservoirs are composed predominantly of mass-transport deposits (sandy slumps and debrites). Classic turbidites are extremely rare (< 1%), which contradict the conventional sequence-stratigraphic tenets of basin-floor fans (Vail et al. 1991). Our reinterpretation of massive sands in the North Sea (Shanmugam et al. 1995) also had resulted in a major discussion by world-renowned sedimentologists composed of Hiscott et al. (1997) and in a reply by Shanmugam et al. (1997). This debate was mostly about high-density turbidity currents.
AAPG Bulletin Editorial Board (1995): Elected Editor: K. T. Biddle. Reviewers: R. M. Mitchum and W. J. Devlin.
Mobil Reviewers (London, UK): R. E. Dunay and K. P. Dean.
Mobil Reviewers (Dallas, Texas): S. H. Gabay, H. C. Olson, J. F. Sarg, and R. J. Moiola. Because of the economic implications of the above study to the petroleum industry, the U.K. Department of Trade and Industry (DTI) invited G. Shanmugam to organiize two “Deep-water sandstone reservoir workshops” at DTI Core Store in Edinburgh, Scotland (1995 and 1997). These two workshops, attended by geoscientists from Europe, Africa, and the USA, utilized seismic data, wireline-log data, and conventional cores from the Faeroe area, North Atlantic (see Shanmugam et al. 1995).
2.3 Ewing Bank, Gulf of Mexico (Mobil research)
The Ewing Bank article entitled “Process sedimentology and reservoir quality of deep-marine bottom-current reworked sands (sandy contourites): an example from the Gulf of Mexico” by Shanmugam et al. (1993) was the first detailed study of BCRS with implications for hybrid flows. The manuscript for AAPG Bulletin was reviewed by C. D. Hollister who introduced the term “contourite”.
2.4 The Annot Sandstone: Peira-Cava Area, Maritime Alps, SE France (Mobil research)
To understand the nature of normal grading and related complexities in the Annot Sandstone, Mobil Oil Company initiated a field research project with three geologists (R.J. Moiola, R.B. Bloch, and G. Shanmugam) in 1998. We reexamined in detail 12 sandstone units of the Annot Sandstone, exposed along a road section in the Peira-Cava Area of French Maritime Alps. This is the same road section that Bouma (1962), p. 93, his Fig. 23) and Pickering and Hilton (1998) used in their studies. Results of our reexamination of the Annot Sandstone were published (Shanmugam 2002, 2003, 2006, 2016a, 2021a, 2021b).
2.5 Flume experiments on sandy debris flows
A Mobil-funded experimental flume study was carried out at St. Anthony Falls Laboratory (SAFL), University of Minnesota (1996–1998) under the direction of Professor G. Parker to evaluate the fluid dynamical properties of sandy debris flows. Results were published in two major articles (Shanmugam 2000a; Marr et al. 2001).
3 The turbidite problem
3.1 Definitions of turbidites
Turbidites are defined as deposits of turbidity currents (Sanders 1965). In this article, a turbidity current is a sediment-gravity flow (Middleton and Hampton 1973) with Newtonian rheology (Dott Jr. 1963) and turbulent state (Sanders 1965) in which sediment is supported by turbulence and from which deposition occurs through suspension settling (Dott Jr. 1963; Sanders 1965; Middleton and Hampton 1973; Shanmugam 1996, 1997), which results in normal grading. Turbidity currents are characterized by low sediment concentration, commonly below 9% sediment concentration by volume (Bagnold 1962). They tend to spread out and develop fan geometry; compared with tongue geometry of debrites (Shanmugam 2021a). Turbidity currents exhibit unsteady and nonuniform flow behavior, and they are surge-type waning flows. As they flow downslope, turbidity currents invariably entrain ambient fluid (seawater) in their frontal head portion due to turbulent mixing (Allen 1985). With increasing fluid content, plastic debris flows may tend to become Newtonian turbidity currents. However, not all turbidity currents evolve from debris flows. Some turbidity currents may evolve directly from sediment failures. Although turbidity currents may constitute a distal end-member in basinal areas, they can occur in any part of the system (i.e., shelf edge, slope, and basin).
3.2 The Bouma Sequence and related turbidite problems
In his seminal publication on turbidite fans, Bouma (Bouma 1962, p. 98) used the term “cone” for describing submarine fans. Bouma (1962) proposed the most convincing link between the turbidite facies model with five divisions, namely Ta, Tb, Tc, Td, and Te (Fig. 2a), and their areal distribution on a submarine fan (Fig. 2b). In illustrating the lateral distribution of the five divisions (i.e., the Bouma Sequence) on a submarine fan (Fig. 2b), Bouma (Bouma 1962, p. 98) stated that “It can be understood that at the outset that the deposit of a large turbidity current contains all the components belonging to the complete sequence type Ta-Te. The coarseness of the material and the velocity decrease in the current direction. Also the thickness of the graded interval decreases in the downstream direction...”. It is worth noting that the Bouma Sequence is meaningful as a predictive model only if it adherers to the Walther’s Law of Facies, which means that the five internal divisions must represent a continuous state of deposition without a break in deposition or a hiatus (Middleton 1973; Walker 1992).
Despite the popularity of the Bouma Sequence, major problems still remain unresolved. For example:
1) Since the introduction of the Bouma Sequence in 1962, there has been a steady influx of concepts proposing alternative origins of the basal Ta division (Fig. 3). These processes include the following:
-
antidune (Harms and Fahnestock 1965);
-
bed load (Sanders 1965);
-
grain flows (Stauffer 1967);
-
pseudoplastic quick bed (Middleton 1967);
-
density-modified grain flows (Lowe 1976);
-
high-density turbidity currents (Lowe 1982);
-
upper-plane-bed (Arnott and Hand 1989);
-
sandy debris flow (Shanmugam 1996).
2) The Tb, Tc, and Td divisions of the turbidite facies model, with traction structures, are an integral part of the “Bouma Sequence” (Fig. 4a). However, the transition from Ta to Tb is still in dispute (Fig. 4b). There is no theoretical or experimental validation of this transition (Leclair and Arnott 2005).
3) Despite their popularity in both academia (Postma and Cartigny 2014) and in the petroleum industry (Hoyal et al. 2014), the Froude fan models with implications for traction structures, suffer for the following reasons:
-
No one has documented supercritical turbidity currents, which Postma and Cartigny (2014), their Fig. 3) equate with high-density (stratified) turbidity currents (Postma et al. 1988), in the modern oceans.
-
There is no experimental basis for Froude fans (Kostic and Parker 2007).
4) Discrete rippled bed could be assumed to be “Tc” of the Bouma Sequence and could be interpreted to be a turbidite under the “base- and top-cut-out Bouma Sequence” logic of Walker (1965) (Fig. 5b). However, based on strict observational methods, the same discrete rippled beds could alternatively be interpreted as contourites (Hollister 1967), tidalites (Klein 1975), baroclinites (i.e., deposits of internal waves and tides) Lonsdale et al. 1972), hybridites or bottom-current reworked sands (Shanmugam et al. 1993) (Fig. 5c). At present, the “cut-out” logic has infiltrated literature not only on turbidites, but also on contourites (e.g., Stow and Smillie 2020, their Fig. 13).
5) Finally, the broad application of the term “turbidite” to deposits of all sediment-gravity flows, which includes debris flows (Fig. 6), by Mutti et al. (1999) is a lingering problem. This problem is further compounded by classifying turbidity currents and debris flows as “hyperpycnal flows” based on provenance (i.e., land derived) (Fig. 7) by Zavala (2020). The reason is that debris flows and turbidity currents have traditionally been classified as sediment-gravity flows based on sediment-support mechanisms by Middleton and Hampton (1973).
4 The bottom-current reworked sands (BCRS) problem
The term BCRS refers to traction (bedload) processes associated with deep-water bottom currents (Shanmugam et al. 1993). In deep-water environments, there are four types of bottom currents, namely (1) thermohaline-induced geostrophic bottom currents, (2) wind-driven bottom currents, (3) deep-water tidal bottom currents, and (4) internal waves and tides (baroclinic currents) (Shanmugam 2008). In addition, hybrid flows are also considered as a type of bottom currents. These bottom currents should not be confused with turbidity currents. The broad term “BCRS” is useful to represent all types of reworked sands by bottom currents in deep-water environments, irrespective of their origin (e.g., thermohaline, wind-driven, tide-driven, or internal-wave driven).
4.1 Wind-driven bottom currents
The Gulf Stream is a powerful, warm, and swift Atlantic Ocean current that originates at the tip of Florida and follows the eastern coastlines of the United States and Newfoundland before crossing the Atlantic Ocean. The Gulf Stream proper is a western-intensified current, largely driven by wind stress (Wunsch 2002). The Loop Current in the eastern Gulf of Mexico is a wind-driven surface current (Pequegnat 1972), and it is genetically linked to the Gulf Stream in the Atlantic Ocean. The Loop Current enters the Gulf of Mexico through the Yucatan Strait as the Yucatan Current; it then flows in a clockwise loop in the eastern Gulf as the Loop Current, and exits via the Florida Strait as the Florida Current (Nowlin Jr. and Hubert 1972; Mullins et al. 1987). Finally, this current merges with the Antilles Current to form the Gulf Stream (Shanmugam 2021a). The Loop Current also propagates eddies into the north-central Gulf of Mexico, where the Ewing Bank area is located, a case study used in the original article (Shanmugam et al. 1993). The eastern part of Gulf of Mexico is strongly influenced by the Loop Current and in some cases the Loop Current influences the intensity of cyclones causing related bottom currents (Shanmugam 2012a, 2017).
Velocities in eddies that have detached from the Loop Current have been recorded as high as 200 cm·s− 1 at a depth of 100 m (Cooper et al. 1990). Current-velocity measurements, bottom photographs, high-resolution seismic records, and GLORIA side-scan sonar records indicate that the Loop Current influences the seafloor at least periodically in the Gulf of Mexico (Pequegnat 1972). Computed flow velocities of the Loop Current vary from nearly 100 cm·s− 1 at the sea surface to more than 25 cm·s− 1 at 500 m water depth (Nowlin Jr. and Hubert 1972). This high surface velocity suggests a wind-driven origin for these currents. Flow velocities measured using a current meter reach up to 19 cm·s− 1 at a depth of 3286 m (Pequegnat 1972). Kenyon et al. (2002) reported 25 cm·s− 1 current velocity measured 25 m above the seafloor. Such currents are capable of reworking fine-grained sand on the seafloor. Current ripples, composed of sand at a depth of 3091 m on the seafloor (Fig. 8), are the clear evidence of deep bottom-current activity in the Gulf of Mexico today (Pequegnat 1972). These current ripples are draped by thin layers of mud. If these mud drapes on sand ripples were preserved in the rock record, they would be termed “mud-offshoots” (Shanmugam et al. 1993).
4.2 Ewing Bank Block 826 Field: a case study
The Ewing Bank Block 826 Field is located nearly 100 km off the Louisiana coast in the northern Gulf of Mexico (Shanmugam et al. 1993). It contains hydrocarbon-producing clastic reservoir sands that have been interpreted as bottom-current reworked sands (Shanmugam et al. 1993). Cores from the Gulf of Mexico show a variety of traction structures that include horizontal rhythmic layers (Fig. 9), low-angle cross-laminae (Fig. 9b), ripple cross laminae, flaser bedding (Fig. 10), mud offshoots in ripples, eroded and preserved ripples, and inverse grading (Shanmugam et al. 1993). Most of the features are interpreted as the products of deposition by traction or combined traction and suspension. As with deposits of contour-following thermohaline currents, it is impossible to establish that a given sedimentary structure in the rock record was originated by wind-driven bottom currents, without establishing the paleo-water circulation pattern independently. Again, the general term “bottom-current reworked sands” is appropriate in many cases.
Sand layers with traction structures occur in discrete units (Fig. 11), but not as part of a vertical sequence of structures formed by a single process, such as the Bouma Sequence. Because traction structures are also observed in deposits of different bottom currents, caution must be exercised in classifying a deposit as a “contourite” based solely on traction structures without independent evidence for contour-following bottom currents in the area. This Ewing Bank case study was the basis for proposing the original hybrid flow depositional model (Fig. 1).
5 The contourite problem
Contourites represent deposits of thermohaline-induced geostrophic contour currents (Hollister 1967). Recent contributions on contourites and bottom-current reworked sands (BCRS) were made by de Castro et al. (2020), de Weger et al. (2020), Hüneke et al. (2020), Hovikoski et al. (2020), Rodrigues et al. (2021), among others. I have discussed various problems associated with contourites elsewhere (Shanmugam 2016b; Shanmugam 2017). The following specific problems are worth noting.
-
Historically, the contourite facies model of Gonthier et al. (1984) has been represented as follows.
-
1)
Gonthier et al. (1984), their Fig. 12) originally published the model without five internal divisions of C1-C5 and without hiatus at the bottom of the sandy interval (C5) in the middle (Fig. 12b).
-
2)
Stow and Faugères (2008), their Fig. 13. 9) published the model with five internal divisions of C1-C5 and with hiatus at the bottom of the sandy interval (C5) in the middle (Fig. 12a). One wonders as to why it took 24 years for Stow and Faugères (2008) to recognize five internal divisions and hiatus, if these features have been an integral part of contourite facies since its emplacement?
-
3)
Faugères and Mulder (2011), their Fig. 3.18) published the model without five internal divisions of C1-C5 and without hiatus at the bottom of the sandy interval in the middle (C3).
-
4)
Rebesco et al. (2014), their Fig. 24) published the model with five internal divisions of C1-C5 and with hiatus at the bottom of the sandy interval in the middle (C3).
-
5)
Most recently, Stow and Smillie (2020), their Fig. 13) published the model with five internal divisions of C1-C5 and without hiatus at the bottom of the sandy interval in the middle (C3).
-
1)
The reason for such inconsistent and confusing portrayal of the same model has never been explained by the authors. Consequently, if the hiatus was truly present in the middle of the contourite facies model, then the contourite facies model is obsolete. This is because the model cannot function as a predictor, a requirement of a facies model (Walker 1992). The presence of hiatuses precludes application of the Walther’s Law for predicting facies (Middleton 1973).
-
de Castro et al. (2020) reported BCRS in the Gulf of Cadiz. Although they reported starved ripples in the sandy intervals, but were unable to document with the empirical photographic evidence due to poor preservation of primary sedimentary structures in unconsolidated sediment intervals. It is important, however, to note that these authors were able to document wispy and lenticular laminae in their Facies 4 of sandy intervals (Fig. 13), indicating bottom-current reworking in a sand-starved system.
-
Stow and Smillie (2020) proposed large-scale cross bedding in medium- to coarse-sands for “The sandy contourite family” (Fig. 14) based on the study of Brackenridge et al. (2018). However, Brackenridge et al. (2018) did not document large-scale cross bedding in contourite sands. Stow and Smillie (2020) may prove to be correct because the likelihood of developing large-scale cross bedding by bottom currents is much greater than by turbidity currents.
-
Stow and Smillie (2020), their Fig. 13) proposed base-cut-out contourites and top-cut-out contourites (Fig. 15). These authors define these “cut-out” sequences from a pure descriptive point of view as they do not discuss the processes behind their formation. Walker (1965) originally applied this “cut-out” logic to the Bouma Sequence. This approach assumes that the entire sequence was present at the time of deposition, but portions were cut-out for any number of subjective viewpoints. If this were true, one could assume anything to arrive at a desired interpretation, such as turbidite, contourite, tidalite, or seismite! Process interpretations must be based on observations and not on assumptions. In practice, it is difficult to verify one’s assumptions without objective criteria.
-
Lovell and Stow (1981, p. 349) conclude that “Contourite: a bed deposited or significantly reworked by a current that is persistent in time and space and flows along slope in relatively deep-water (certainly below wave base). The water may be fresh or salt; the cause of the current is not necessarily critical to the application of the term.” I have italicized the last phrase to emphasize the point that contourites can be produced by any kind of bottom current (Fig. 16), irrespective of their origin (i.e., thermohaline, wind, tide, or baroclinic). This confusion can be avoided by restricting the use of the term “contourite” exclusively to deposits of thermohaline contour currents (Hollister 1967).
6 The tidalite problem
Tidalites are deposits of tidal currents (Klein 1971). Tidal currents operate both in shallow-water and deep-water environments (Klein 1975; Shepard et al. 1979; Shanmugam 2003). Shepard et al. (1979) measured current velocities in 25 submarine canyons worldwide at water depths ranging from 46 to 4200 m by suspending current meters, usually 3 m above the sea bottom. Shepard et al. (1979) also documented systematically that up- and down-canyon currents closely correlated with timing of tides. These canyons include the Hydrographer, Hudson, Wilmington, and Congo (Zaire) in the Atlantic Ocean; and the Monterey, Hueneme, Redondo, La Jolla/Scripps, and Hawaii canyons in the Pacific Ocean. Maximum velocities of up- and down-canyon currents commonly ranged from 25 to 50 cm·s− 1. Keller and Shepard (1978) reported velocities as high as 7075 cm·s− 1, velocities sufficient to transport even coarse-grained sand, from the Hydrographer Canyon. In the Niger Delta area of West Africa, five modern submarine canyons (Avon, Mahin, Niger, Qua Iboe, and Calabar) have been recognized. In the Calabar River, the tidal range is 2.8 m and tidal flows with reversible currents are common (Allen 1965). In the Calabar Estuary, maximum ebb-current velocities range from 60 to 280 cm·s− 1, and flood current velocities range from 30 to 150 cm·s− 1. These velocities are strong enough to transport particles of sand and gravel size. The Calabar Estuary has a deep-water counterpart that cuts through sediments of the outer shelf and slope, forming the modern Calabar Submarine canyon. Thus, as they do in the Congo Canyon to the south, tidal currents are likely to operate in the Calabar and Qua Iboe Canyons.
In an ancient submarine canyon recognized in the Edop Field, Nigeria, cores show well-developed double mud layers (DML), indicating tidal deposition (Fig, 17). DMLs are unique to shallow-water tidal environments and have been ascribed to alternating ebb and flood tidal currents with extreme time-velocity asymmetry in subtidal settings (Visser 1980). Double mud layers are sedimentary structures of tidalite origin which have been recognized in both shallow-water subtidal environments (Visser 1980) and in deep-water facies (Shanmugam 2003). In the Krishna-Godavari Basin, Bay of Bengal, cored intervals from canyon-fill facies exhibit both double mud layers and discrete ripple chains (Fig. 18). These discrete ripples were not considered as top- and base-cut out Bouma Sequence by Shanmugam et al. (2009). Such a pragmatic tidal interpretation, without the application of the Bouma Sequence, is consistent with regional setting.
7 The baroclinite problem
Baroclinites represent deposits of baroclinic currents induced by internal waves and tides (Shanmugam 2013a). Gill (1982) discussed the basic differences between barotropic (surface) waves that develop at the air–water interface and baroclinic (internal) waves that develop at the water–water interface (Fig. 19). Fluid parcels in the entire water column move together in the same direction and with the same velocity in a surface wave, whereas fluid parcels in shallow and deep layers of the water column move in opposite directions and with different velocities in an internal wave (Fig. 19). The surface displacement and interface displacement are the same for a surface wave, while the interface displacements are large for internal wave. Although the free surface movement associated with the baroclinic mode is only 1/400 of the interface move movement, this is still sufficient for baroclinic motions to be detectable by sea-surface changes (Wunsch and Gill 1976).
7.1 Empirical data
Apel (2002), Apel et al. (2006), and Jackson (2004) have published comprehensive accounts of internal waves and tides worldwide. A sedimentologic and oceanographic review is provided by Shanmugam (2013a). Internal waves are gravity waves that oscillate along oceanic pycnoclines. Internal tides are internal waves with a tidal frequency. Internal solitary waves (i.e., solitons), the most common type, are commonly generated near the shelf edge (100–200 m in bathymetry) and in the deep ocean over areas of seafloor irregularities, such as mid-ocean ridges, seamounts, and guyots. Empirical data from 51 locations (Shanmugam 2013a) in the Atlantic, Pacific, Indian, Arctic, and Antarctic oceans reveal that internal solitary waves travel in packets, such as the one in the Andaman Sea (Fig. 20). Internal waves commonly exhibit (1) higher wave amplitudes (5–50 m) than surface waves (< 2 m), (2) longer wavelengths (0.5–15 km) than surface waves (100 m), (3) longer wave periods (5–50 min) than surface waves (9–10 s), and (4) higher wave speeds (0.5–2 m· s− 1) than surface waves (25 cm· s− 1). Maximum speeds of 48 cm· s− 1 for baroclinic currents were measured on guyots.
7.2 Depositional framework
A preliminary depositional framework is proposed for continental slopes, submarine canyons, and guyots (Fig. 21a). To date, the only convincing photographic documentation of sedimentary bedforms, attributed to internal waves and internal tides, in modern deep-marine environments has been from seamounts and guyots in the Pacific Ocean (Menard 1952; Lonsdale et al. 1972). These photographs are the only empirical foundation for gaining insights into depositional processes (e.g., traction vs. suspension) associated with internal waves and internal tides. Photographic data show the occurrence of discrete ripple chains (Fig. 21b). However, core-based sedimentological studies of modern sediments emplaced by baroclinic currents on continental slopes, in submarine canyons, and on submarine guyots are lacking. There are no cogent sedimentologic or seismic criteria for distinguishing ancient baroclinites.
7.3 Academic discussions
There have been attempts to interpret ancient strata with traction structures as deposits of internal waves and internal tides (i.e. baroclinites) (Gao and Eriksson 1991; Gao et al. 1998; He et al. 2011; Pomar et al. 2012; Gao et al. 2013). However, these interpretations and related issues were the subjects of lively debates (He et al. 2012; Pomar et al. 2013; Shanmugam 2012b, 2013b, 2014a, 2014b; Gao et al. 2014; Dunham and Saller 2014). At present, our understanding of the origin of traction structures in deep-water environments is in a state of flux.
8 The Annot Sandstone: orthodoxy vs. empirical evidence
Bouma (1962) used the Annot Sandstone [Grès d’ Annot Formation (Eocene–Oligocene)], exposed in the Peira-Cava Area and vicinity of the French Maritime Alps (Fig. 22), for developing the first turbidite facies model. Later, he extended his study to Switzerland and other areas in Europe. Bouma (1962) documented his field observations in eight photographic plates, seven of which contain outcrop photographs from the Peira Cava type locality (Plates A, B, C, D, E, F, and H) and the eighth one contains outcrop photographs from Switzerland (Plate G).
Although the Annot Sandstone appears to show normal grading, detailed description offers a different story (Shanmugam 2002). Simply put, the Bouma Sequence is an extremely diluted version that excludes all the important details from a process sedimentological point. The key features that contradict the conventional turbidite interpretation of the Annot Sandstone are:
-
Basal contorted layers (Shanmugam 2002): The contorted intervals beneath the sandstone are interpreted to be a product of shearing and slumping produced by stress exerted by overriding mass flows. Large-scale shear structures have been reported in the Annot Sandstone in other areas as well (Clark and Stanbrook 2001).
-
Basal inverse grading (Fig. 23c): A combined mechanism of dispersive pressure, matrix strength, hindered settling, and buoyant lift would explain the development of inverse grading. The inverse grading is attributed to a plastic debris-flow origin.
-
Basal normal grading: This is a rare feature. Because these sandstone intervals are not only amalgamated but composed of complex internal features, no simple origin is meaningful.
-
Lenticular layers (Shanmugam 2002): Lenticular layers with quartzose granules in sandstone may be interpreted as deposits of non-Newtonian flows with strength. The presence of planar fabric supports the laminar state of flow (Fisher 1971). By simply describing these sedimentary features without using the “Bouma” divisions, lenticular layers would be interpreted to be deposits of plastic laminar flows.
-
Pockets of gravel (Fig. 24): Unit 8 with pockets of gravel cannot be explained by a single waning turbidity current. The depositing flow must have had enough flow strength to support granules near its upper part. The pockets of gravels near the top of the bed reflect freezing of a plastic flow.
-
Floating armored mudstone balls (Shanmugam 2002): Stanley et al. (1978) interpreted armored mudstone balls in the Annot Sandstone to be associated with the filling of canyons by mass flows.
-
Floating mudstone clasts (Fig. 23e): In Unit 7, intervals of floating mudstone clasts are interpreted as deposits of plastic debris flows. A combination of dispersive pressure, matrix strength, hindered settling, and buoyant lift is proposed as the cause of floating clasts.
-
Floating quartzose granules (Shanmugam 2002): Even a single floating quartzose granule in a quartz-rich sandy matrix is of rheologic and hydrodynamic significance. In the Annot Sandstone, quartzose granules floating in a sandy matrix are evidence that the flow had strength and that settling of the grains is hindered. Because Unit 7 contains floating quartz granules and amalgamation surfaces, it has been interpreted to be deposits of multiple episodes of sandy debris flows and bottom currents.
-
Double mud layers (DMLs, Fig. 25): There are no analogous divisions for DMLs in the Bouma Sequence. In the Annot Sandstone, DMLs have been interpreted to be deposits of deep-marine tidal currents (Shanmugam 2003). Hydrodynamically, turbidity currents are unsuitable to explain the DML.
-
Sigmoidal cross-bedding (Fig. 26): There are no analogous divisions for sigmoidal cross-bedding in the Bouma Sequence. These bedforms, typical of tidal currents in estuarine environments (Terwindt 1981; Banerjee 1989; Shanmugam et al. 2000), can also be attributed to deep-marine tidal currents in submarine canyons (Shanmugam 2003).
Although the turbidite facies model advocates a simple origin by turbidity currents, details of the Annot Sandstone clearly reveal a complex origin by processes involving slumping, sandy debris flows, and tidal bottom currents. Deposits of true turbidity currents, with normal grading, are extremely rare. Our observations are nothing new. Stanley (1963, 1975) was one of the early researchers to recognize the importance of slumps, debris flows, grain flows, and liquefied flows in the origin of the Annot Sandstone, SE France. In a recent comprehensive study, Etienne et al. (2012, p. 3) have acknowledged the complex origin of the Annot Sandstone. The Annot Sandstone units are up to 1200 m thick (Inglis et al. 1981) and composed of siliciclastic deposits resulting from various types of gravity flows such as slumps, debris flows (Hampton 1972; Middleton and Hampton 1973), slurry flows (Lowe and Guy 2000), high-density turbidity currents (Kuenen 1966; Middleton 1967; Lowe 1982; Postma 1986) also defined as sandy debris flows (Shanmugam 1996, 2000a) and low-density turbidites (Bouma 1962; Middleton and Hampton 1973) i.e. classical turbidites.
The problem remains as to how one can explain deep-water units that show a partial Bouma Sequence composed of a basal massive division and an upper parallel-laminated division. In areas in which both downslope sandy debris flows and alongslope-bottom currents operate concurrently, the reworking of the tops of sandy debris flows by bottom currents may be expected. Such a scenario could generate a basal massive sand division and an upper reworked division, mimicking a partial Bouma Sequence (Shanmugam 2006, 2012a). The reworking of deep-water sands by bottom currents has been suggested by other researchers as well (e.g., Stanley 1993; Ito 2002; de Castro et al. 2020; Hovikoski et al. 2020; Fonnesu et al. 2020; Fuhrmann et al. 2020).
In summary, the most influential turbidite facies model (i.e., the Bouma Sequence) was acceptable in 1962 when our understanding of deep-water processes was limited. However, given the cumulative knowledge that we have acquired during the past 58 years, such as double mud layers (Fig. 17) and sigmoidal cross-bedding (Fig. 26) in the Annot Sandstone, the Bouma Sequence is obsolete at present (2021). Under this umbrella of new knowledge, the Bouma Sequence can no longer function as a genetic facies model for turbidity currents and their deposits. Although it was reasonable in 1962, at a time of limited knowledge on deep-water processes, to introduce a simplistic turbidite facies model, it is unreasonable to apply this model to the rock record at present (2021). Even 28 years ago, in questioning the very foundation of the “Bouma Sequence”, Middleton (1993, his p. 90-91) stated in a cautionarynote: “It must be emphasized that gravity flows are a very complex class of flows, more complex for example than open-channel flows such as rivers (which might be considered to be merely one extreme end member of the gravity flow spectrum). No geologists would expect that rivers could deposit only a single type of sediment bed, characterized by a single suite of sedimentary structures and textures—yet many geologists have such a notion about turbidites.” Middleton's (1993) insightful skepticism about the “Bouma Sequence” has been and will always be relevant and true.
9 The hybridite problem
9.1 Etymology and genetic terms
The term “hybridite” refers to an amalgamated and reworked offspring deposit of two hydrodynamically different flow types, such as downslope sandy debris flows and alongslope contour currents (i.e., hybrid flows). However, some authors (e.g., Houghton et al. 2009; Fonnesu et al. 2015, 2016, 2018; Yang et al. 2018) equate hybrid flows (Fig. 27) with flow transformation in gravity flows (Fig. 28). This controversy necessitates the basic description of the term “hybrid” etymologically.
According to the Cambridge Dictionary, the term “hybrid” (Fig. 29) represents the hybrid offspring byproducts of two different plants, animals, or other entities (https://dictionary.cambridge.org/dictionary/learner-english/hybrid, accessed June 2, 2020). In animals, for example, a mule is the hybrid offspring of a male donkey and a female horse. By contrast, a debris flow often transforms downslope into a stratified flow with a lower debris-flow layer and an upper turbidity-current layer (Fig. 28), as documented by Norem et al. (1990). Our flume experiments (Fig. 30) also documented flow transformation from a debris flow into a downslope stratified lower debris-flow layer and an upper turbidity current layer (Fig. 31). In other words, the concept of “hybrid” begins with two different parent species yielding a single hybrid offspring, whereas the concept of “flow transformation” begins with a single parent flow that transforms downslope into two sediment-gravity flows. The other confusion is that hybrid flows are synonymously used for density-stratified high-density turbidity currents (HDTC) (Fig. 32b). Controversies surrounding HDTC were discussed by Shanmugam (1996).
In maintaining this conceptual clarity, the continued misapplication of hybrid concept for flow transformation is misleading (Fig. 33). Although flow transformation is a real phenomenon, it cannot be recognized in the ancient sedimentary record with objective criteria (Shanmugam 2012a). In discussing the physics of debris flows, Iverson (1997) states, ‘When mass movement occurs, the sediment–water mixtures transform to a flowing, liquid-like state, but eventually they transform back to nearly rigid deposits.’ Although such transformations can occur during transport, evidence for such flow transformations cannot be inferred from the final deposit. We may never resolve this issue of flow transformation because it would be like attempting to establish the previous life history of a human being after reincarnation!
Based on experiments and field observations, the term “hybrid flows” is explained in this article to represent the intersection of two different processes, such as alongslope bottom currents (e.g., contour currents) intersecting with downslope sediment-gravity flows (e.g., sandy debris flows, turbidity currents, etc.) in deep-water environments (Fig. 34a). Such an interaction commonly results in bottom-current-reworked sands with traction structures (Shanmugam et al. 1993). Under such conditions, hybrid flows may generate partial “Bouma Sequence” (Fig. 34b), which could explain the upward transition from Ta to Tb, if one believes in the validity of the Bouma Sequence. Fonnesu et al. (2020) and Fuhrmann et al. (2020) have discussed the concept of hybrid flows using examples from Mozambique.
10 Discussion
According to Bouma (1962), traction structures are an integral part of the turbidite facies model, which has become known as the “Bouma Sequence”. In the 1960s, it was reasonable to attribute traction structures uniquely to turbidites. However, during the past 60 years, it has become obvious that deposits of contour currents, wind-driven currents, tidal currents and baroclinic currents also develop traction structures. More importantly, it became clear that intersection of alongslope bottom currents with downslope sediment-gravity flows (i.e., hybrid flows) characteristically develop traction structures that may mimic the “Bouma Sequence”. Thus, there is a problem as to the significance of traction structures in distinguishing individual deep-water facies, such as contourites, tidalites, hybridites, etc..
Shepard et al. (1979) documented 25,000 h of velocity measurements of mostly tidal currents from over 150 stations located in 25 submarine canyons around the world. The study by Shepard et al. (1979) has never been matched by any other studies on velocity measurements of modern turbidity currents in submarine canyons, including by the most recent study on the Monterey Canyon (Maier et al. 2019). The previous 12 case studies of modern turbidity currents that were published during a period of 56 years (1952–2008) (e.g., Heezen and Ewing 1952; Inman et al. 1976; Hay et al. 1982; Normark 1989; Parsons et al. 2003; Xu et al. 2004, among others) were also unconvincing (see explanations by Shanmugam 2012a). This extreme rarity of velocity measurements of modern turbidity currents is truly mystifying given the fact that thousands of ancient strata were interpreted routinely as turbidites in the sedimentary record (Fig. 35).
Empirical data on turbidity currents and on tidal currents gathered from modern deep-water settings, when compared to their ancient interpreted counterparts (Fig. 35), defy the doctrine of uniformitarianism (Fig. 36). Clearly, the driving force behind most turbidite interpretations has been the Bouma Sequence and related groupthink, not empirical data and pragmatism.
11 A solution
Despite the recognition that various bottom currents do form traction structures in deep-water environments (Hollister 1967; Lonsdale et al. 1972; Klein 1975; Shanmugam et al. 1993), there are no solutions to the problem of distinguishing traction structures formed by one type vs. the other (e.g., thermohaline-driven vs. wind-driven current). Even recent coring of sandy intervals in the Gulf of Cadiz with active bottom currents offers no practical solutions. For example, Brackenridge et al. (2018) focused on modern sandy contourites. However, the recovery of unconsolidated sands, particularly when sandy intervals are coarse-grained and very-well sorted, offer no straightforward results as in muddy sediments. This is because the high-porosity of these well-sorted sands made them prone to undergo drilling-related liquefaction, which tends to destroy any kind of the primary fabric of sedimentary structures. Nevertheless, de Castro et al. (2020) documented wispy and lenticular laminae associated with bottom-current reworked sands (BCRS) in a sand-starved system. Such excruciatingly detailed observations are needed immediately. If more such studies are forthcoming for sandy intervals, we might be able to solve this problem of traction structures.
A suggested solution to interpreting the origin of traction structures is composed of two parts. The first part is to interpret traction structures in the sedimentary record pragmatically on the basis of criteria developed from empirical field and experimental evidence, without any built-in bias using genetic facies models, such as the “Bouma Sequence”. The second part is to develop objective criteria for distinguishing traction structures formed by a particular bottom current, such as, contour current, tidal current, baroclinic current, amid aforementioned difficulties. This is a formidable task for which there are no shortcuts. This arduous task begins immediately with the doctrine of uniformitarianism (Fig. 36) as the underpinning in developing criteria. Until reliable criteria are developed to distinguish traction structures of each type of bottom currents, a general term “BCRS” (i.e., bottom-current reworked sands) is appropriate for deposits of all four kinds of bottom currents (Fig. 16).
12 Conclussions
-
During the past 60 years, the Bouma Sequence has been the most influential facies model for interpreting deep-water sediments as turbidites.
-
The orthodoxy is that traction structures are an integral part of the Bouma Sequence and that cut-out logic can be used to interpret discrete ripple chains as turbidites.
-
The problem is that discrete ripple chains can also be formed by various bottom currents, such as wind-driven currents, contour currents, tidal currents, baroclinic currents, and hybrid flows. As a consequence, bottom-current reworked sands (BCRS) are routinely misinterpreted as turbidites by using the cut-out logic.
-
After describing over 10 km of cores and outcrops worldwide, I have learned that the more the number of case studies I have examined, the more the empirical evidence I have obtained in support of bottom-current origins of traction structures.
-
Although it was reasonable to introduce a simplistic “Bouma Sequence” in 1962, at a time of limited knowledge on deep-water processes, it is obsolete now in 2021 to apply this model to the rock record amid a wealth of new knowledge on deep-water contour currents, tidal currents, baroclinic currents, and hybrid flows at present (2021).
-
In popular classifications, genetic facies “turbidites” (Fig. 6), “hyperpycnites” (Fig. 7), and “contourites” (Fig. 16) no longer represent a deposit of a specific process.
-
Double mud layers and sigmoidal cross beddings are viable criteria for distinguishing deposits of deep-marine tidal bottom currents. However, no such unique traction structures exist for deposits of other three types of bottom currents (i.e., thermohaline, wind, and baroclinic).
-
A general solution is to stop applying genetic facies models for interpreting traction structures in the rock record and to start developing objective criteria based on uniformitarianism coupled with common sense. Until such reliable criteria are developed to distinguish traction structures of each type of bottom currents, a general term “BCRS” (i.e., bottom-current reworked sands) is appropriate for deposits of all four kinds of bottom currents.
-
With the uttermost diligence and the patience, we might be able to resolve these problems during the next five decades by 2070!
-
Amid many unresolved problems, deep-water system still remains a frontier domain for future research.
Availability of data and materials
Data sharing is not applicable to this article as no datasets were generated or analyzed during the current study.
Change history
27 May 2021
A Correction to this paper has been published: https://doi.org/10.1186/s42501-021-00093-1
Abbreviations
- AAPG:
-
American Association of Petroleum Geologists
- BCRS:
-
Bottom-current reworked sands
- GSA:
-
Geological Society of America
- HDTC:
-
High-density turbidity currents
- IIT:
-
Indian Institute of Technology
- JOPG:
-
Journal of Palaeogeography
- JSR:
-
Journal of Sedimentary Research
- Km:
-
Kilometer
- m:
-
Meter
- MA:
-
Massachusetts
- MIT:
-
Massachusetts Institute of Technology
- MPG:
-
Marine and Petroleum Geology
- MTD:
-
Mass-transport deposits
- N:
-
Neap tide
- NASA:
-
National Aeronautics and Space Administration
- NNW:
-
North-northwest
- S:
-
Spring tide
- SAFL:
-
St. Anthony Falls Laboratory
- SSE:
-
South-southeast
- US:
-
United States
- USA:
-
United States of America
- USGS:
-
United States Geological Survey
- WHOI:
-
Woods Hole Oceanographic Institute
References
Allen, J.R.L. 1965. Late Quaternary Niger Delta, and adjacent areas: sedimentary environments and lithofacies. AAPG Bulletin 49: 547–600.
Allen, J.R.L. 1985. Loose-boundary hydraulics and fluid mechanics: selected advances since 1961. In Sedimentology: recent developments and applied aspects, ed. P.J. Brenchley and P.J. Williams, 7–28. Oxford: Published for the Geological Society by Blackwell Scientific Publications.
Apel, J.R. 2002. Oceanic internal waves and solitons. In An atlas of oceanic internal solitary-like waves and their properties (May 2002), by Global Ocean Associates, prepared for Office of Naval Research – Code 322PO, ed. C.R. Jackson and J.R. Apel, 1–40 http://www.internalwaveatlas.com/Atlas_PDF/IWAtlas_Pg001_Introduction.pdf. (Accessed 14 May 2012).
Apel, J.R., L.A. Ostrovsky, Y.A. Stepanyants, and J.F. Lynch. 2006. Internal solitons in the ocean. Woods Hole Oceanographic Institution Technical Report WHOI-2006-04, 109. Woods Hole: Woods Hole Oceanographic Institution.
Arnott, R.W.C., and B.M. Hand. 1989. Bedforms, primary structures and grain fabric in the presence of suspended sediment rain. Journal of Sedimentary Petrology 59: 1062–1069.
Bagnold, R.A. 1962. Auto-suspension of transported sediment. Proceedings of the Royal Society of London Series A 265: 315–319.
Banerjee, I. 1989. Tidal sand sheet origin of the transgressive basal Colorado sandstone (Albian): a subsurface study of the Cessford field, Southern Alberta. Bulletin of Canadian Petroleum Geology 37: 1–17.
Bouma, A.H. 1962. Sedimentology of some flysch Deposits: A Graphic Approach to Facies Interpretation, 168. Amsterdam: Elsevier.
Bouma, A.H., M.B. DeVries, and C.G. Stone. 1997. Reinterpretation of depositional processes in a classic flysch sequence (Pennsylvanian Jackfork Group), Ouachita Mountains, Arkansas and Oklahoma, discussion. AAPG Bulletin 81: 470–472.
Brackenridge, R.E., D.A.V. Stow, F.J. Hernández-Molina, C. Jones, A. Mena, I. Alejo, et al. 2018. Textural characteristics and facies of sand-rich contourite depositional systems. Sedimentology 65 (7): 2223–2252. https://doi.org/10.1111/sed.12463.
Briggs, G., and L.M. Cline. 1967. Paleocurrents and source areas of late Paleozoic sediments of the Ouachita Mountains, Southeastern Oklahoma. Journal of Sedimentarey Petrology 37: 985–1000.
Clark, J.D., and D.A. Stanbrook. 2001. Formation of large-scale shear structures during the deposition of high-density turbidity currents, Grès d'Annot formation, SE France. In Particulate gravity currents, 31, ed. W.D. McCaffrey, B.C. Kneller, and J. Peakall, 219–232. IAS Special Publication.
Coleman, J.L., Jr. 1997. Reinterpretation of depositional processes in a classic flysch sequence (Pennsylvanian Jackfork Group), Ouachita Mountains, Arkansas and Oklahoma, discussion. AAPG Bulletin 81: 466–469.
Cooper, C., G.Z. Forristall, and T.M. Joyce. 1990. Velocity and hydrographic structure of two Gulf of Mexico warm- core rings. Journal of Geophysical Research 95 (C2): 1663–1679.
D'Agostino, A.E., and D.W. Jordan. 1997. Reinterpretation of depositional processes in a classic flysch sequence (Pennsylvanian Jackfork Group), Ouachita Mountains, Arkansas and Oklahoma: discussion. AAPG Bulletin: 473–475.
Damuth, J.E., and R.W. Fairbridge. 1970. Equatorial Atlantic deepsea sands and ice age aridity in tropical South America. GSA Bulletin 81: 585–601.
de Castro, S., F.J. Hernandez-Molina, F.J. Rodriguez-Tovar, E. Llave, Z.L. Ng, N. Nishida, A. Mena, et al. 2020. Contourites and bottom current reworked sands: Bed facies model and implications. Marine Geology 428: 106–267.
de Weger, W., F.J. Javier Hernández-Molina, R. Flecker, F.J. Sierro, D. Chiarella, W. Krijgsman, et al. 2020. Late Miocene contourite channel system reveals intermittent overflow behavior. Geology 48 (12). https://doi.org/10.1130/G47944.1.
Dott, R.H., Jr. 1963. Dynamics of subaqueous gravity depositional processes. AAPG Bulletin 47: 104–128.
Dunham, J., and A.H. Saller. 2014. Modern internal waves and internal tides along oceanic pycnoclines: challenges and implications for ancient deep-marine baroclinic sands: discussion. AAPG Bulletin 98: 851–857.
Dykstra, M. 2012. Deep-water tidal sedimentology. In Principles of tidal sedimentology, ed. R.A. Davis Jr. and R.W. Dalrymple, 371–396. Berlin: Springer.
Etienne, S., T. Mulder, M. Bez, G. Desaubliaux, A. Kwasniewski, O. Parize, et al. 2012. Multiple scale characterization of sand-rich distal lobe deposit variability, examples from the Annot Sandstones Formation, Eocene– Oligocene, SE France. Sedimentary Geology 273–274: 1–18.
Fallgatter, C., B. Kneller, P.S.G. Paim, J.P. Milana, et al. 2017. Transformation, partitioning and flow–deposit interactions during the run-out of megaflows. Sedimentology 64: 359–387.
Faugères, J.-C., and T. Mulder. 2011. Contour currents and contourite drifts. In Deep-sea sediments, vol. 63, ed. H. Huneke and T. Mulder. Developments in sedimentology, 149–214.
Faugères, J.-C., Gonthier, E., Stow, D.A.V., 1984. Contourite drift moulded by deep Mediterranean outflow. Geology 12:296–300.
Fisher, R.V. 1971. Features of coarse-grained, high-concentration fluids and their deposits. Journal of Sedimentary Petrology 41: 916–927.
Fonnesu, M., D. Palermo, M. Galbiati, M. Marchesini, E. Bonamini, and D. Bendias. 2020. A new world-class deep-water play-type, deposited by the syndepositional interaction of turbidity flows and bottom currents: The giant Eocene coral field in northern Mozambique. Marine and Petroleum Geology 111: 179–201.
Fonnesu, Marco, Fabrizio Felletti, Peter D.W. Haughton, Marco Patacci, and William D. McCaffrey. 2018. Hybrid event bed character and distribution linked to turbidite system sub-environments: The North Apennine Gottero sandstone (north-west Italy). Sedimentology 65 (1): 151–190. https://doi.org/10.1111/sed.12376.
Fonnesu, Marco, Peter Haughton, Fabrizio Felletti, and William McCaffrey. 2015. Short length-scale variability of hybrid event beds and its applied significance. Marine and Petroleum Geology 67: 583–603. https://doi.org/10.1016/j.marpetgeo.2015.03.028.
Fonnesu, Marco, Marco Patacci, Peter D.W. Haughton, Fabrizio Felletti, and William D. McCaffrey. 2016. Hybrid event beds generated by local substrate delamination on a confined-basin floor. Journal of Sedimentary Research 86 (8): 929–943. https://doi.org/10.2110/jsr.2016.58.
Fuhrmann, A., I.A. Kane, M.A. Clare, R.A. Ferguson, E. Schomacker, E. Bonamini, F.A. Contreras, et al. 2020. Hybrid turbidite-drift channel complexes: An integrated multiscale model. Geology 48: 562–568. https://doi.org/10.1130/G47179.1.
Gao, Z., and K.A. Eriksson. 1991. Internal-tide deposits in an Ordovician submarine channel: previously unrecognized facies? Geology 19: 734–737.
Gao, Z., K.A. Eriksson, Y. He, S. Luo, and J. Guo. 1998. Deep-water traction current deposits—a study of internal tides, internal waves, contour currents and their deposits, 128. Beijing and New York, Utrecht, Tokyo: Science Press.
Gao, Z.Z, Y.B. He, X.D. Li, and T.Z. Duan. 2013. Review of research in internal-wave and internal-tide deposits of China. Journal of Palaeogeography 2 (1): 56–65.
Gao, Z.Z., Y.B., He, X.D., Li, T.Z. Duan. 2014. Reply to Shanmugam, G. “Review of research in internal-wave and internal-tide deposits of China: discussion”. Journal of Palaeogeography 3 (4): 351–358.
Gill, A.E. 1982. Atmosphere-ocean dynamics. International geophysics series. Vol. 30, 662. San Diego: Academic Press, An Imprint of Elsevier.
Gonthier, E.G., J.-C. Faugères, and D.A.V. Stow. 1984. Contourite facies of the faro drift, Gulf of Cadiz. In Fine-grained sediments: deep-water processes and facies, 15, ed. D.A.V. Stow and D.J.W. Piper, 275–292. Geological Society of London Special Publication.
Hampton, M.A. 1972. The role of subaqueous debris flows in generating turbidity currents. Journal of Sedimentary Petrology 42: 775–793.
Harms, J.C., and R.K. Fahnestock. 1965. Stratification, bed forms, and flow phenomena (with an example from the Rio Grande). In Primary sedimentary structures and their hydrodynamic interpretation, 12, ed. G.V. Middleton, 84–115. SEPM Special Publication.
Hay, A., R.W. Burling, and J.W. Murray. 1982. Remote acoustic detection of a turbidity current surge. Science 217: 833–835.
He, Y.B., J.X. Luo, Z.Z. Gao, and Z. Wen. 2012. Reply to the discussion of He et al. 2011, Geo-Marine Letters: Evidence of internal-wave and internal-tide deposits in the middle Ordovician Xujiajuan formation of the Xiangshan Group, Ningxia, China. Geo-Marine Letters 32: 367–372. https://doi.org/10.1007/s00367-012-0290-2.
He, Y.B., J.X. Luo, X.D. Li, Z.Z. Gao, and Z. Wen. 2011. Evidence of internal-wave and internal-tide deposits in the Xujiajuan formation of the Xiangshan group, Ningxia, China. Geo-Marine Letters 31: 509–523.
Heezen, B.C., and M. Ewing. 1952. Turbidity currents and submarine slumps, and the 1929 grand banks earthquake. American Journal of Sciences 250: 849–873.
Heezen, B.C., R.J. Menzies, E.D. Schneider, W.M. Ewing, and N.C. Granelli. 1964. Congo submarine canyon. AAPG Bulletin 48: 1126–1149.
Hiscott, R.N., K.T. Pickering, A.H. Bouma, B.M. Hand, B.C. Kneller, G. Postma, and W. Soh. 1997. Basin-floor fans in the North Sea, sequence stratigraphic models vs. sedimentary facies, discussion. AAPG Bulletin 81: 662–665.
Hollister, C.D. 1967. Sediment distribution and deep circulation in the Western North Atlantic (unpublished Ph.D. dissertation), 467. New York: Columbia University.
Houghton, P., C. Davis, W. McCaffrey, and S. Barker. 2009. Hybrid sediment gravity flow deposits – Classification, origin and significance. Marine and Petroleum Geology 26: 1900–1918.
Hovikoski, J., A. Uchman, R. Weibel, H. Nøhr-Hansen, E. Sheldon, J. Ineson, M. Bjerager, J. Therkelsen, M. Olivarius, M. Larsen, P. Alsen, and J. Bojesen-Koefoed. 2020. Upper Cretaceous bottom current deposits, North-East Greenland. Sedimentology. https://doi.org/10.1111/sed.12764.
Hoyal, D.C.H., T. Demko, G. Postma, R.W. Wellner, K. Pederson, V. Abreu, et al. 2014. Evolution, architecture and stratigraphy of Froude supercritical submarine fans. In AAPG Annual Convention and Exhibition, 6–9 April, datapages/search and discovery article #90189.
Hsü, K.J. 1964. Cross-laminated sequence in graded bed sequence. Journal of Sedimentary Petrology 34: 379–388.
Hubert, J.F. 1964. Textural evidence for deposition of many western North Atlantic deep-sea sands by ocean- bottom currents rather than turbidity currents. Journal of Geology 72: 757–785.
Hüneke, H., F.J. Hernandez-Molina, F.J. Rodríguez-Tovar, E. Llave, D. Chiarella, A. Mena, et al. 2020. Diagnostic criteria using microfacies for calcareous contourites, turbidites and pelagites in the Eocene-Miocene slope succession, southern Cyprus. Sedimentology. https://doi.org/10.1111/sed.12792.
Inglis, I., Verstralen, I., Mousset, E., Salim, A., Vially, R., 1981. Etude sédimentologique des Grès d’Annot (Région de Colmars-les-Alpes et du Col de la cayolle). ENSPM, Rueil Malmaison 169.
Inman, D.L., C.E. Nordstrom, and R.E. Flick. 1976. Currents in submarine canyons: an air-sea-land interaction. Annual Review of Fluid Mechanics 8: 275–310.
Ito, M. 2002. Kuroshio current-influenced sandy contourites from the Plio-Pleistocene Kazusa forearc basin, Boso peninsula, Japan. In Deep-water contourite systems: modern drifts and ancient series, seismic and sedimentary characteristics, 22, ed. D.A.V. Stow, C.J. Pudsey, J.A. Howe, J.-C. Faugères, and A.R. Viana, 421–432. London: Geological Society Memoirs.
Iverson, R.M. 1997. The physics of debris flows. Reviews of Geophysics 35: 245–296.
Jackson, B.A. 2004. Seismic evidence for gas hydrates in the North Makassar Basin, Indonesia. Petroleum Geoscience 10: 227–238. https://doi.org/10.1144/1354-079303-601.
Keller, G.H., and F.P. Shepard. 1978. Currents and sedimentary processes in submarine canyons off the Northeast United States. In Sedimentation in submarine canyons, fans, and trenches, ed. D.J. Stanley and G.K. Kelling, 15–32. Stroudsburg: Dowden, Hutchinson & Ross, Inc.
Kenyon, N.H., A.M. Akhmetzhanov, and D.C. Twichell. 2002. Sand wave fields beneath the loop current, Gulf of Mexico: reworking of fan sands. Marine Geology 192: 297–307.
Klein, G.D. 1966. Dispersal and petrology of sandstones of Stanley-Jackfork boundary, Ouachita foldbelt, Arkansas and Oklahoma. AAPG Bulletin 50: 308–326.
Klein, G.D. 1970. Depositional and dispersal dynamics of intertidal sand bars. Journal of Sedimentary Petrology 40: 1095–1127.
Klein, G.D. 1971. A sedimentary model for determining paleotidal range. GSA Bulletin 82: 2585–2592.
Klein, G.D. 1975. Resedimented pelagic carbonate and volcaniclastic sediments and sedimentary structures in leg 30 DSDP cores from the western equatorial Pacific. Geology 3: 39–42.
Kostic, S., and G. Parker. 2007. Conditions under which a supercritical turbidity current traverses an abrupt transition to vanishing bed slope without a hydraulic jump. Journal of Fluid Mechanics 586: 119–145.
Kuenen, Ph.H. 1966. Experimental turbidite lamination in a circular flume. Journal of Geology 74: 523–545.
Lanteaume, M., B. Beaudoin, and R. Campredon. 1967. Figures sedimentaires du flysch ‘gres d’ Annot’ du synclinal de Peira-Cava, 97. Paris: Centre National de la Recherche Scientifique.
Leclair, S., and R.W.C. Arnott. 2005. Parallel lamination formed by high-density turbidity currents. Journal of Sedimentary Research 75: 1–5.
Lonsdale, P., W.R. Nornaark, and W.A. Newman. 1972. Sedimentation and erosion on Horizon Guyot. GSA Bulletin 83: 289–316.
Lovell, J.P.B., and D.A.V. Stow. 1981. Identification of ancient sandy contourites. Geology 9: 347–349.
Lowe, D.R. 1976. Grain flow and grain flow deposits. Journal of Sedimentary Petrology 46: 188–199.
Lowe, D.R. 1982. Sediment gravity flows: II. Depositional models with special reference to the deposits of high- density turbidity currents. Journal of Sedimentary Petrology 52: 279–297.
Lowe, D.R. 1997. Reinterpretation of depositional processes in a classic flysch sequence (Pennsylvanian Jackfork Group), Ouachita Mountains, Arkansas and Oklahoma, discussion. AAPG Bulletin 81: 460–465.
Lowe, D.R., and M. Guy. 2000. Slurry-flow deposits in the Britannia formation (Lower Cretaceous), North Sea: a new perspective on the turbidity current and debris flow problem. Sedimentology 47: 31–70.
Maier, K.L., J.A. Gales, C.K. Paull, K. Rosenberger, P.J. Talling, S.M. Simmons, R. Gwiazda, M. McGann, M.J.B. Cartigny, E. Lundsten, K. Anderson, M.A. Clare, J. Xu, D. Parsons, J.P. Barry, M. Wolfson-Schwehr, N.M. Nieminski, E.J. Sumner, et al. 2019. Linking direct measurements of turbidity currents to submarine canyon-floor deposits. Frontiers of Earth Science 7: 144. https://doi.org/10.3389/feart.2019.00144.
Marr, J.G., P.A. Harff, G. Shanmugam, and G. Parker. 2001. Experiments on subaqueous sandy gravity flows, the role of clay and water content in flow dynamics and depositional structures. GSA Bulletin 113: 1377–1386.
Martin-Chivelet, J., M.A. Fregenal-MartiÄnez, and B. Chacón. 2008. Traction structures in contourites. In Contourites: Developments in Sedimentology, vol. 60, ed. M. Rebesco and A. Camerlenghi, 159–182.
Menard, H.W. 1952. Deep ripple marks in the sea. Journal of Sedimentary Petrology 22: 3–9.
Middleton, G.V. 1967. Experiments on density and turbidity currents: III. Deposition of sediment. Canadian Journal of Earth Sciences 4: 475–505.
Middleton, G.V. 1973. Johannes Walther’s Law of the correlation of fades. GSA Bulletin 84: 979–988.
Middleton, G.V. 1993. Sediment deposition from turbidity currents. Annual Review of Earth and Planetary Sciences 21: 89–114.
Middleton, G.V., and M.A. Hampton. 1973. Sediment gravity flows: mechanics of flow and deposition. In Turbidites and deep-water sedimentation, ed. G.V. Middleton and A.H. Bouma, 1–38. Anaheim: SEPM Pacific Section Short Course.
Mullins, H.T., A.F. Gardulski, S.W. Wise Jr., and J. Applegate. 1987. Implications for seismic stratigraphic succession and Loop Current/Gulf Stream circulation. GSA Bulletin 98: 702–713.
Mutti, E. 2009. The future of field-based stratigraphic and sedimentologic studies from a personal perspective. Journal of Mediterranean Earth Sciences 1: 89–90.
Mutti, E., and M. Carminatti. 2011. Deep-water sands in the Brazilian offshore basins. AAPG Search and Discovery Article 30: 219 http://www.searchanddiscovery.com/documents/2012/30219mutti/ndx_mutti.pdf. (Accessed 29 Oct 2015).
Mutti, E., and F. Ricci Lucchi. 1972. Turbidites of the northern Apennines: introduction to facies analysis (English translation by Nilsen, T.H., 1978). International Geology Review 20: 125–166.
Mutti, E., R. Tinterri, E. Remacha, N. Mavilla, S. Angella, and L. Fava. 1999. An introduction to the analysis of ancient turbidite basins from an outcrop perspective, 61. Tulsa, Note Series No. 39: American Association of Petroleum Geologists Continuing Education Course.
Mutti, E. 2020. The beauty of rocks: A journey through the Pyrenees with Emiliano Mutti (90 episodes of videos). Accessed June 21, 2020. https://www.eni.com/en-IT/operations/emiliano-mutti.html.
Mutti, E., 1992. Turbidite Sandstones. Agip Special publication, Milan, p. 275.
Norem, H., J. Locat, and B. Schieldrop. 1990. An approach to the physics and the modeling of submarine flowslides. Marine Geosciences & Geotechnology 9: 93–111.
Normark, W.R. 1989. Observed parameters for turbidity-current flow in channels, reserve fan, Lake Superior. Journal of Sedimentary Petrology 59: 423–431.
Nowlin, W.D., Jr., and J.M. Hubert. 1972. Contrasting summer circulation patterns for the eastern Gulf. In Contributions on the physical oceanography of the Gulf of Mexico. Texas A&M University Oceanographic Studies 2, ed. L.R.A. Capurro and J.L. Reid, 119–137. Houston: Gulf Publishing Co.
Parsons, J.D., W.J. Schweller, C.W. Stelting, J.B. Southard, W.J. Lyons, and J.P. Grotzinger. 2003. A preliminary experimental study of turbidite fan deposits—reply. Journal of Sedimentary Research 73: 839–841.
Pequegnat, W.E. 1972. A deep bottom-current on the Mississippi Cone. In Contribution on the physical oceanography of the Gulf of Mexico. Texas A&M University Oceanographic Studies, 2, ed. L.R.A. Capurro and J.L. Reid, 65–87. Houston: Gulf Publishing.
Pickering, K.T., and V. Hilton. 1998. Turbidite Systems of Southeast France, 229. London: Vallis Press.
Pierson, T.C., and J.E. Costa. 1987. Arheologic classification of subaerial sediment-water flows. In Debris flows/avalanches: process, recognition, and mitigation, VII, ed. J.E. Costa and G.F. Wieczorek, 1–12. Geological Society of America Reviews in Engineering Geology.
Pomar, L., M. Morsilli, P. Hallock, and B. Bádenas. 2012. Internal waves, an under-explored source of turbulence events in the sedimentary record. Earth-Science Reviews 111: 56–81.
Pomar, L.; Morsilli, Michele; Hallock, Pamela; Bádenas, B.; and Bourgault, D., 2013. “Reply to Shanmugam, G., Comment on “Internal waves, an underexplored source of turbulence events in the sedimentary record” by Pomar Et Al. [Earth-Science Reviews, 111 (2012), 56–81], Earth- Science Reviews 116: 206-210.
Postma, G. 1986. Classification of sediment gravity-flow deposits based on flow conditions during sedimentation. Geology 14: 291–294.
Postma, G., and M.J.B. Cartigny. 2014. Supercritical and subcritical turbidity currents and their deposits – a synthesis. Geology 42: 987–990.
Postma, G., W. Nemec, and K.L. Kleinspehn. 1988. Large floating clasts in turbidites: a mechanism for their emplacement. Sedimentary Geology 58: 47–61.
Racki, G. 2003. “HOT” articles in modern sedimentary research. The updated list. IAS (International Association of Sedimentologists) Newsletter 187 (August): 3–5.
Rebesco, M., F.J. Hernández-Molina, D. Van Rooij, and A. Wåhlin. 2014. Contourites and associated sediments controlled by deep-water circulation processes: state-of-the-art and future considerations. Marine Geology 352: 111–154.
Rodrigues, S., F.J. Hernandez-Molina, and A. Kirby. 2021. A late Cretaceous mixed (turbidite-contourite) system along the Argentine margin: paleoceanographic and conceptual implications. Marine and Petroleum Geology 123 (2021): 104768.
Sanders, J.E. 1965. Primary sedimentary structures formed by turbidity currents and related resedimentation mechanisms. In Primary sedimentary structures and their hydrodynamic interpretation, 12, ed. G.V. Middleton, 192–219. SEPM Special Publication.
Shanmugam, G. 1996. High-density turbidity currents: are they sandy debris flows? Journal of Sedimentary Research 66: 2–10.
Shanmugam, G. 1997. The Bouma Sequence and the turbidite mind set. Earth-Science Reviews 42: 201–229.
Shanmugam, G. 2000a. 50 years of the turbidite paradigm (1950s–1990s): deep-water processes and facies models––a critical perspective. Marine and Petroleum Geology 17: 285–342.
Shanmugam, G. 2000b. John E. Sanders and the turbidite controversy. In Conference on the history of geologic pioneers, ed. G.M. Friedman, 19–20. Troy: Rensselaer Center of Applied Geology.
Shanmugam, G. 2002. Ten turbidite myths. Earth-Science Reviews 58: 311–341.
Shanmugam, G. 2003. Deep-marine tidal bottom currents and their reworked sands in modern and ancient submarine canyons. Marine and Petroleum Geology 20: 471–491.
Shanmugam, G. 2006. Deep-water Processes and Facies Models: Implications for Sandstone Petroleum Reservoirs, 476. Amsterdam: Elsevier.
Shanmugam, G. 2007. The obsolescence of deep-water sequence stratigraphy in petroleum geology. Indian Journal of Petroleum Geology 16 (1): 1–45.
Shanmugam, G. 2008. Deep-water bottom currents and their deposits. In Contourites: Developments in Sedimentology 60, ed. M. Rebesco and A. Camerlenghi, 59–81. Amsterdam: Elsevier Chapter 5.
Shanmugam, G. 2012a. New perspectives on deep-water sandstones: origin, recognition, initiation, and reservoir quality, 9. In Handbook of petroleum exploration and production, 524. Amsterdam: Elsevier.
Shanmugam, G. 2012b. Discussion of He et al., 2011 (Geo-Marine Letters) Evidence of internal-wave and internal-tide deposits in the Middle Ordovician Xujiajuan Formation of the Xiangshan Group, Ningxia, China. Geo- Marine Letters 32: 359–366.
Shanmugam, G. 2013a. Modern internal waves and internal tides along oceanic pycnoclines: challenges and implications for ancient deep-marine baroclinic sands. AAPG Bulletin 97: 767–811.
Shanmugam, G., 2013b. Comment on “Internal waves, an underexplored source of turbulence events in the sedimentary record” by L. Pomar, M. Morsilli, P. Hallock, and B. Bádenas [Earth-Science Reviews, 111 (2012), 56–81]. Earth-Science Reviews 116: 195–205.
Shanmugam, G. 2014a. Modern internal waves and internal tides along oceanic pycnoclines: challenges and implications for ancient deep-marine baroclinic sands: reply. AAPG Bulletin 98: 858–879.
Shanmugam, G. 2014b. Review of research in internal-wave and internal-tide deposits of China, discussion. Journal of Palaeogeography 3 (4): 332–350.
Shanmugam, G. 2016a. Submarine fans: a critical retrospective (1950–2015). Journal of Palaeogeography 5 (2): 110–184.
Shanmugam, G. 2016b. The contourite problem. In Sediment provenance, ed. R. Mazumder, 183–254. Amsterdam: Elsevier Chapter 9.
Shanmugam, G. 2017. Contourites: physical oceanography, process sedimentology, and petroleum geology. Petroleum Exploration and Development 44 (2): 183–216.
Shanmugam, G. 2018. Preface. In: special issue dedicated to George Devries Klein by the Journal of the Indian Association of Sedimentologists (JIAS). Journal of Indian Association of Sedimentologists 35 (2): 1–5.
Shanmugam, G. 2018b. The hyperpycnite problem. Journal of Palaeogeography 7 (3): 197–238.
Shanmugam, G. 2019. Reply to discussions by Zavala (2019) and by Van Loon, Hüeneke, and Mulder (2019) on Shanmugam, G. (2018, Journal of Palaeogeography, 7 (3): 197–238): the hyperpycnite problem. Journal of Palaeogeography 8 (4): 408–421.
Shanmugam, G. 2020. Gravity flows: types, definitions, origins, identification markers, and problems. Journal of Indian Association of Sedimentologists 37 (2): 61–90.
Shanmugam, G. 2021a. Mass Transport, Gravity Flows, and Bottom Currents: Downslope and Alongslope Processes and Deposits, 608. Amsterdam: Elsevier.
Shanmugam, G. 2021b. Deep-water processes and deposits. In Encyclopedia of geology, ed. David Alderton and Scott A. Elias, 2nd ed., 965–1009. Amsterdam: Elsevier.
Shanmugam, G., R.B. Bloch, J.E. Damuth, and R.J. Hodgkinson. 1997. Basin-floor fans in the North Sea, sequence stratigraphic models vs. sedimentary facies, reply. AAPG Bulletin 81: 666–672.
Shanmugam, G., R.B. Bloch, S.M. Mitchell, G.W.J. Beamish, R.J. Hodgkinson, J.E. Damuth, T. Straume, S.E. Syvertsen, and K.E. Shields. 1995. Basin-floor fans in the North Sea, sequence stratigraphic models vs. sedimentary facies. AAPG Bulletin 79: 477–512.
Shanmugam, G., and R.J. Moiola. 1982. Eustatic control of turbidites and winnowed turbidites. Geology 10: 231–235.
Shanmugam, G., and R.J. Moiola. 1988. Submarine fans: characteristics, models, classification, and reservoir potential. Earth-Science Reviews 24: 383–428.
Shanmugam, G., and R.J. Moiola. 1995. Reinterpretation of depositional processes in a classic flysch sequence (Pennsylvanian Jackfork Group), Ouachita Mountains, Arkansas and Oklahoma. AAPG Bulletin 79: 672–695.
Shanmugam, G., and R.J. Moiola. 1997. Reinterpretation of depositional processes in a classic flysch sequence (Pennsylvanian Jackfork Group), Ouachita Mountains, Arkansas and Oklahoma: reply. AAPG Bulletin 81: 476–491.
Shanmugam, G., M. Poffenberger, and J. Toro Alava. 2000. Tide-dominated estuarine facies in the Hollin and Napo (‘T’ and ‘U’) formations (Cretaceous), Sacha Field, Oriente Basin, Ecuador. AAPG Bulletin 84: 652–682.
Shanmugam, G., S.K. Shrivastava, and B. Das. 2009. Sandy debrites and tidalites of Pliocene reservoir sands in upper-slope canyon environments, Offshore Krishna-Godavari Basin (India): implications. Journal of Sedimentary Research 79: 736–756.
Shanmugam, G., T.D. Spalding, and D.H. Rofheart. 1993. Process sedimentology and reservoir quality of deep- marine bottom-current reworked sands (sandy contourites): an example from the Gulf of Mexico. AAPG Bulletin 77: 1241–1259.
Shepard, F.P., N.F. Marshall, P.A. McLoughlin, and G.G. Sullivan. 1979. Currents in submarine canyons and other sea valleys. AAPG Studies in Geology 8: 173.
Slatt, R.M., P. Weimer, and C.G. Stone. 1997. Reinterpretation of depositional processes in a classic flysch sequence (Pennsylvanian Jackfork Group), Ouachita Mountains, Arkansas and Oklahoma, discussion. AAPG Bulletin 81: 449–459.
Stanley, D.J. 1963. Vertical petrographic variability in Annot Sandstone turbidites. Journal of Sedimentary Petrology 33: 783–788.
Stanley, D.J.. 1975. Submarine canyon and slope sedimentation (Gres D’Annot) in the French Maritime Alps. In: IXth Congress International de Sedimentologie, Nice, Field Guide, p. 129.
Stanley, D.J., 1993. Model for turbidite-to-contourite continuum and multiple process transport in deep marine settings: example in the rock record. Sedimentary Geology 82, 241–255.
Stanley, D.J., Palmer, H.D., Dill, R.F., 1978. Coarse sediment transport by mass flow and turbidity current processes and downslope transformations in Annot Sandstone canyon-fan valley systems. In: Stanley, D.J., Kelling, G. (Eds.), Sedimentation in Submarine Canyons, Fans, and Trenches. Hutchinson and Ross, Stroudsburg, PA, pp. 85–115.
Stauffer, P.H. 1967. Grain flow deposits and their implications, Santa Ynez Mountains, California. Journal of Sedimentary Petrology 37: 487–508.
Stow, D., and Z. Smillie. 2020. Distinguishing between deep-water sediment facies: Turbidites, contourites and hemipelagites. Geosciences 10: 68. https://doi.org/10.3390/geosciences10020068.
Stow, D.A.V., and J.-C. Faugères. 2008. Contourite facies and the facies model. In Contourites, ed. M. Rebesco and A. Camerlenghi, 223–256. Amsterdam: Elsevier.
Talling, P.J. 2013. Hybrid submarine flows comprising turbidity current and cohesive debris flow: deposits, theoretical and experimental analyses, and generalized models. Geosphere 9 (3): 460–488.
Terwindt, J.H.J., 1981. Origin and sequences of sedimentary structures in inshore mesotidal deposits of the North Sea. In: Nio, S.-D., Shuttenhelm, R.T.E., Van Weering, Tj.C.E. (Eds.), Holocene Marine Sedimentation in the North Sea Basin, No. 5. International Association of Sedimentologists Special Publication, pp. 4–26.
Vail, P.R., F. Audemard, S.A. Bowman, P.N. Eisner, and C. Perez-Cruz. 1991. The stratigraphic signatures of tectonics, eustacy and sedimentology – an overview. In Cycles and events in stratigraphy, ed. G. Einsele, W. Ricken, and A. Seilacher, 618–659. Berlin: Springer-Verlag.
van der Lingen, G. J. (1969) The turbidite problem. New Zealand Journal of Geology and Geophysics 12 (1):7–50
Visser, M.J. 1980. Neap-spring cycles reflected in Holocene subtidal large-scale bedform deposits: a preliminary note. Geology 8: 543–546.
Walker, R.G. 1965. The origin and significance of the internal sedimentary structures of turbidites. Proceedings of the Yorkshire Geological Society 35: 1–32.
Walker, R.G. 1992. Facies, facies models, and modern stratigraphic concepts. In Facies models: response to sea level change, GEO text 1, ed. R.G. Walker and N.P. James, 1–14. Geological Association of Canada.
Wunsch, C. 2002. What is the thermohaline circulation? Science 298 (5596): 1179–1181. https://doi.org/10.1126/science.1079329.
Wunsch, C., and A.E. Gill. 1976. Observations of equatorially trapped waves in Pacific sea level variations. Deep-Sea Research Oceanographic Abstracts 23 (5): 371–390.
Xu, J.P., M.A. Noble, and L.K. Rosenfeld. 2004, 2004. In-situ measurements of velocity structure within turbidity currents. Geophysical Research Letters 31: L09311. https://doi.org/10.1029/2004GL019718.
Yang, T., Y.C. Cao, Henrik Friis, K. Liu, and Y. Wang. 2018. Origin and evolution processes of hybrid event beds in the lower Cretaceous of the Lingshan Island, Eastern China. Australian Journal of Earth Sciences 65 (4): 517–534.
Zavala, C. 2020. Hyperpycnal (over density) flows and deposits. Journal of Palaeogeography 9(2):17. https://doi.org/10.1186/s42501-020-00065-x.
Acknowledgements
This paper is based on my Keynote lecture given at the “JoP Zoom 2020 Global Conference on Deep-Water Systems” on October 17, 2020, Beijing, China. I thank Editor Dr. Yuan Wang for inviting me to present the lecture at the JoP Conference as well as for her helpful review comments. I also thank Prof. F.J. Hernández-Molina and Dr. S. de Castro, both of Royal Holloway, University of London, who helped me with research material from IODP Expedition 339, Gulf of Cadiz. I am grateful to three journal reviewers, Prof. Santanu Banerjee, IIT Bombay (India), Dr. S. de Castro, Royal Holloway, University of London (UK), and Prof. You-Bin He, Yangtze University, Wuhan (China), for their critical and helpful comments. As always, I am thankful to my wife Jean Shanmugam for her general comments.
Funding
This project did not receive any funding.
Author information
Authors and Affiliations
Contributions
The author read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The author declares that he has no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Shanmugam, G. The turbidite-contourite-tidalite-baroclinite-hybridite problem: orthodoxy vs. empirical evidence behind the “Bouma Sequence”. J. Palaeogeogr. 10, 9 (2021). https://doi.org/10.1186/s42501-021-00085-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s42501-021-00085-1