Background

Ethanol is a simple alcoholic compound with the chemical formula of C2H6O and has a variety of applications in chemical, food, medical and health industries. It is commonly used in beverages, flavors, fuels, dyes as well as manufacturing disinfectant, antifreeze and paint. In addition to the non-renewable chemical process to be made from petroleum, coal and natural gas, ethanol can also be produced from biomass by fermentation of sugars, starch or cellulose as raw materials [1]. Microorganisms including bacteria, yeasts and fungi which can produce ethanol as the major fermentation product have been extensively studied [2]. Many of them were engineered to improve their ethanol production capacity [3]. On the other hand, the utilization of ethanol by microorganisms has not yet been thoroughly investigated, though ethanol metabolic pathways are ubiquitous in nature.

Several microbial strains were identified to be capable of utilizing ethanol. It is well known that the acetic acid bacteria can oxidize ethanol to acetic acid [4]. But whether ethanol could serve as the carbon and energy source for these bacteria was not clearly established. Acinetobacter baylyi was able to produce storage lipids using different carbon sources and ethanol showed the highest specific growth rates among them [5]. Methanogenium organophilum, a non-autotrophic methanogenic bacterium, was able to use ethanol as the hydrogen donor [6]. The sulfate-reducing bacterium Desulfovibrio desulfuricans was tested using ethanol as the carbon source. Growth yield was lower for ethanol in comparison with lactic acid [7]. The yeasts Pichia pastoris [8], Candida utilis [9] and Yarrowia lipolytica [10] could utilize ethanol as the carbon source and eventually convert it into biomass and metabolites. However, this ability was not studied in detail and the mechanisms for ethanol oxidation in these strains were still unclear.

Although the above microorganisms could utilize ethanol, they are not easily genetically modified to produce high-value chemicals. Escherichia coli is one of the most commonly used host microorganisms in industrial biotechnology [11]. In early reports, it was found that ethanol disappeared from cultures of E. coli under anaerobic conditions [12]. Further 14C isotope labeling experiments showed that ethanol was incorporated into the cell components when E. coli grew on a synthetic medium [13]. However, there has been no further study since then. Ethanol catabolism pathway in Aspergillus nidulans has been well characterized [14]. Ethanol is oxidized by alcohol dehydrogenases to generate acetaldehyde. Acetaldehyde is converted to acetic acid by aldehyde dehydrogenases. Acetic acid is then activated by an acetyl-CoA synthetase and the formed acetyl-CoA is used for the synthesis of other metabolites (Fig. 1). In this study, different alcohol dehydrogenases and aldehyde dehydrogenases were expressed in E. coli to test their feasibility for ethanol utilization. Furthermore, an acetyl-CoA derived metabolite-mevalonic acid biosynthesis pathway was introduced into the engineered strain to demonstrate the potential of value-added product production from ethanol.

Fig. 1
figure 1

Metabolic pathway for ethanol utilization and mevalonic acid production. Enzymes involved in the pathway include: ADH alcohol dehydrogenase, ALDH aldehyde dehydrogenase, ACS acetyl-CoA synthetase, ACAT acetyl-CoA acetyltransferase, HMGS HMG-CoA (3-hydroxy-3-methylglutaryl CoA) synthase, HMGR HMG-CoA reductase

Full size image

Results

Escherichia coli strains cannot utilize ethanol as the sole carbon source

Ethanol is a mild solvent and causes less damage to microbial cells. Several E. coli strains commonly used in laboratory, including BL21(DE3), DH5α, Top10 and JM109 which differ in the coding regions of a few genes, were used to evaluate their ethanol resistance and adaptation. These strains were grown in M9 mineral media supplemented with 20 g L−1 glucose and 1 mM MgSO4, and then treated with ethanol of different concentrations (5 g L−1, 10 g L−1, 20 g L−1 and 50 g L−1). We found that ethanol with a concentration as high as 50 g L−1 did not significantly affect the growth of all the E. coli strain (data not shown). Although the presence of ethanol could alter the gene expression pattern of E. coli [15], it does not have serious effects on normal cell metabolism. Ethanol can be directly added to the culture broth at relatively high concentrations.

In order to test the feasibility of E. coli to grow on ethanol, these strains were cultured in M9 mineral media with reduced glucose concentration of 1 g L−1. After the initial glucose was exhausted (about 8 h for strain BL21(DE3) and 9 h for the other three strains), 5 g L−1 of ethanol was added to the fermentation broth. The bacterial cells were cultured continuously and cell densities were measured over the whole processes. As shown in Fig. 2a, the growth of all the strains ceased at an OD600 of 1.0 after ethanol was supplied. When monitoring ethanol concentrations in the culture broth, we found that the residual ethanol was slightly decreased, which might be due to evaporation during the fermentation process (Fig. 2b). In early literature reports [13], E. coli was demonstrated to have the ability to metabolize ethanol. The different genotype between E. coli sub-strains might lead to their diverse ethanol utilizing ability. Nowadays, the commercially available E. coli K12 derivatives lack many genes to achieve good heredity stability [16], which impairs the ability to metabolize various substrates.

Fig. 2
figure 2

Growth curves and ethanol utilization of commonly used E. coli strains. a Growth curves of strains BL21(DE3), DH5α, Top10 and JM109; b residual ethanol concentrations in the fermentation broth of strains BL21(DE3), DH5α, Top10 and JM109

Full size image

Construction of the ethanol utilization pathway in E. coli

The ethanol utilization pathway requires successive dehydrogenation reactions to form acetic acid. Alcohol/aldehyde dehydrogenases are the key enzymes catalyzing these reactions. Escherichia coli genome encodes a variety of alcohol/aldehyde dehydrogenases [17]. Three of them (AdhE, AdhP and AldA) were chosen to evaluate their effects on ethanol utilization. The alcohol/aldehyde dehydrogenase AdhE could naturally catalyze the sequential reduction of acetyl-CoA to acetaldehyde and then to ethanol under fermentative conditions [18]. The expression of alcohol dehydrogenase AdhP was induced by ethanol [19] and AldA has the potential to serve as aldehyde dehydrogenase in the oxidation of aldehyde [20]. The genes encoding these dehydrogenases were cloned into the pTrcHis2B vector to overexpress these enzymes.

The ethanol utilization pathway in the hyphal fungus Aspergillus nidulans have been well characterized as an inducible system responsible for the utilization of ethanol as sole carbon source [14, 21]. The action of two enzymes, alcohol dehydrogenase I (ADHI) encoded by the alcA gene and aldehyde dehydrogenase (ALDH) encoded by the aldA gene was necessary and sufficient for the oxidation of ethanol to acetic acid via acetaldehyde. Therefore, the two structure genes, alcA and aldA, were also cloned into pTrcHis2B vector individually and simultaneously, resulting pTrc-AnalcA, pTrc-AnaldA and pTrc-AnalcdA. The recombinant plasmids harboring the ethanol utilization pathway were confirmed by colony PCR, restriction enzyme mapping and direct DNA sequencing. Then these recombinant plasmids were transformed into E. coli competent cells to evaluate their effects on ethanol utilization.

Shake-flask fermentation of engineered E. coli strains using ethanol as the carbon source

Recombinant E. coli strains expressing different alcohol/aldehyde dehydrogenases were grown on M9 mineral media supplemented with 1 g L−1 glucose and 1 mM MgSO4. When OD600 of the bacterial cultures reached 0.3 or so, 0.2 mM IPTG was added to induce the expression of recombinant enzymes. Then cultivation was continued and residual glucose concentrations were monitored until it was exhausted. The bacterial cells were further starved for 1 h and ethanol was added to the culture broth to serve as the carbon source. As shown in Fig. 3a, strains BL21/pTrc-EcadhE, BL21/pTrc-EcadhP, BL21/pTrc-EcadhEaldA and BL21/pTrc-EcadhPaldA possessed similar growth curves as the wild-type E. coli BL21(DE3). Cell growth stopped after the depletion of initial glucose at 8 h after inoculation. AdhE cannot catalyze the reversible reaction of ethanol oxidation. Although the expression of adhP was induced by ethanol, the major physiological role of this enzyme is to allow E. coli to excrete ethanol during mixed-acid fermentation [22]. The aldA gene encoding aldehyde dehydrogenase is mainly responsible for the dehydrogenation of lactaldehyde [20]. Therefore, these enzymes had no effects in the utilization of ethanol. On the contrary, a remarkable increase in OD600 was observed for strain BL21/pTrc-AnalcA after ethanol was supplemented in the culture. This indicated that the alcohol dehydrogenase from A. nidulans, could readily render E. coli the ability to metabolize ethanol and further confirmed that alcA was essential for the use of ethanol as the sole carbon source [23]. Obviously, the alcA gene was sufficient for ethanol utilization in E. coli. When the aldehyde dehydrogenase from A. nidulans was co-expressed with alcA, a further slight enhancement was achieved in the cell density.

Fig. 3
figure 3

Ethanol utilization of engineered E. coli strains with different alcohol/aldehyde dehydrogenases. a Growth curves of engineered strains harboring different alcohol/aldehyde dehydrogenases; b residual ethanol concentrations of different engineered strains; c acetic acid concentrations of strains BL21/pTrc-AnalcA and BL21/pTrc-AnalcdA during the fermentation processes

Full size image

The residual ethanol, acetaldehyde and acetic acid in the fermentation broth were also monitored during the culture process. For strains BL21(DE3), BL21/pTrc-EcadhE, BL21/pTrc-EcadhP, BL21/pTrc-EcadhEaldA and BL21/pTrc-EcadhPaldA, there were only a small decrease in residual ethanol concentrations, which was in accordance with that these strains could not utilize ethanol. For strains BL21/pTrc-AnalcA and BL21/pTrc-AnalcdA, ethanol was consumed immediately after it was added to the flasks. Both strains could utilize more than 2 g L−1 ethanol in the remaining cultivation time. The titer of residual ethanol reached 2.60 ± 0.1 g L−1 and 2.24 g L−1 of ethanol was consumed for the best strain BL21/pTrc-AnalcdA (Fig. 3b). Acetaldehyde accumulation could be hardly detected in all strains. Aldehyde was harmful to bacterial cells. When acetaldehyde was generated by alcohol dehydrogenase, it was rapidly further oxidized to acetic acid by the endogenous aldehyde dehydrogenases [24]. Acetic acid was also not found in the fermentation broth of strains BL21(DE3), BL21/pTrc-EcadhE, BL21/pTrc-EcadhP, BL21/pTrc-EcadhEaldA and BL21/pTrc-EcadhPaldA. On the other hand, both BL21/pTrc-AnalcA and BL21/pTrc-AnalcdA could produce acetic acid after ethanol was supplemented. The maximum titer of acetic acid was 142 ± 9 mg L−1 for strain BL21/pTrc-AnalcdA. The acetic acid could be further utilized during the remaining culture time (Fig. 3c).

Effects of acetyl-CoA synthetase on ethanol utilization

Acetyl-CoA synthetase, catalyzing the formation of acetyl-CoA from acetic acid, is the next step for ethanol catabolism. Overexpression of acetyl-CoA synthetase has been demonstrated to enhance the assimilation of acetic acid and the activation to acetyl-CoA, leading to an increase in acetate uptake [25]. Therefore, this enzyme has the potential to enhance ethanol utilization ability of the engineered strain. Here, the native E. coli acetyl-CoA synthetase (encoded by acs) was cloned into the expression vector pACYCDuet-1, resulting pA-Ecacs. The strain BL21/pTrc-AnalcdA&pA-Ecacs was cultured under the same conditions above. As shown in Fig. 4, there were no significant improvement in cell growth and ethanol utilization. Since acetic acid could only accumulate to no more than 150 mg L−1 in the fermentation broth, the normal intracellular level of acetyl-CoA synthetase was enough for ethanol metabolism. In addition, the acetyl-CoA synthetase catalyzed reaction is coupled with ATP hydrolysis, which is an energy consuming process [26]. When using ethanol as the carbon source instead of glucose, ATP generation is much lower. The ATP supply cannot meet the requirement for next-step activation of acetic acid for further metabolism. Therefore, further overexpression of acetyl-CoA synthetase could not enhance ethanol utilization. The dehydrogenation reaction was the rate-limiting step for ethanol catabolism.

Fig. 4
figure 4

Effects of acetyl-CoA synthetase on ethanol utilization. AnalcdA, E. coli BL21(DE3) harboring pTrc-AnalcdA; AnalcdAEcacs, E. coli BL21(DE3) harboring pTrc-AnalcdA and pA-Ecacs

Full size image

Production of mevalonic acid from ethanol

To test the feasibility of using ethanol as the carbon source for value-added chemicals biosynthesis, we further introduced the mevalonic acid biosynthesis pathway previously constructed in our lab into the engineered strain. Escherichia coli BL21(DE3) harboring both pTrc-AnalcdA and pA-EfmvaES was cultured in M9 mineral media under shake-flasks conditions. After fermentation, the culture broth was acidified and extracted with ethyl acetate, and then the organic phase was analyzed by GC–MS. Figure 5a showed the total ion current chromatogram of the fermentation products from strain BL21/pTrc-AnalcdA&pA-EfmvaES. The peak corresponding to the retention time of 16.97 min was identified to be mevalonic acid lactone by comparison the mass spectrum (Fig. 5c) with an external standard. The production of mevalonic acid was much lower than the E. coli strains expressing the same enzymes cultured using glucose as the carbon source [27]. This would be responsible for the relatively poor bacterial growth and energy metabolism when using ethanol as the sole carbon source.

Fig. 5
figure 5

Identification of mevalonic acid lactones by GC–MS. Total ion chromatograms of mevalonic acid lactones produced from ethanol (a) and ethanol-D6 (b) (the peaks of mevalonic acid lactones were indicated with arrows); mass spectra of mevalonic acid lactones produced from ethanol (c) and ethanol-D6 (d)

Full size image

To further confirm the mevalonic acid was synthesized from ethanol, deuterium-labeled ethanol-D6 was used as the feedstock instead of normal ethanol [28]. The total ion current chromatogram and mass spectrum of mevalonic acid lactone generated from ethanol-D6 were shown in Fig. 5b, d. The ion fragments of mevalonic acid lactone derived from ethanol or ethanol-D6 were analyzed [29]. Two major fragments of mevalonic acid lactone at m/z 43 and 71 were shifted to m/z 45 and 79 when ethanol-D6 was supplemented to the culture media. The molecular ion peak was increased by ten (from m/z 130 to 140). Evidences for partial incorporation of the deuterium atom would be seen from the ion fragments at m/z 43, 75 and 77, indicating that a proportion of the hydrogen in mevalonic acid might be from the initially added glucose.

Discussion

Although E. coli can utilize a variety of feedstocks as the carbon sources, ethanol has rarely been tested. Ethanol can diffuse freely into and out of cell membranes. It can compromise the permeability barrier provided by cell membranes and have a certain toxic effect on cells [30]. Escherichia coli can adapt to ethanol by altering its membrane lipid composition. Genes responsible for ethanol tolerance including gcv, betIBA, betT and marAB were identified through transcriptome analysis [31]. Several ethanol-resistant mutants of E. coli with high-concentration ethanol resistance were isolated through random mutagenesis which had the potential for commercial ethanol production [32]. Considering that this study aims to investigate the utilization of ethanol by E. coli, the concentration of ethanol in the medium will not be too high. Moreover, we can use the feeding strategy to continuously add ethanol to the fermentation broth. Therefore, commonly used E. coli strains can fully meet the requirements of ethanol utilization.

Alcohol dehydrogenase catalyzes the rate-limiting step for ethanol catabolism in our engineered strain. Alcohol dehydrogenase can utilize either NAD+ or NADP+ as the electron donor. When using ethanol as the substrate, alcohol dehydrogenase is found to be NAD+ specific [33]. Ethanol has a high redox potential, which is not preferable for NAD+ reduction. According to the second law of thermodynamics, the changes of Gibbs free energy should be negative for the enzymatic reaction to easily proceed. Thermodynamic analysis of the reaction \( (\text{Ethanol}\, + \,{\text{NAD}}^{ + } { \leftrightharpoons }{\text{Acetaldehyde}}\, + \,{\text{NADH}}\, + \,{\text{H}}^{ + } ) \) shows that it has a positive standard Gibbs free energy change (ΔG′0) of 23.7 kJ mol−1 which is endergonic, indicating that it cannot be carried out efficiently from the perspective of thermodynamics [34]. Only if acetaldehyde was further and quickly metabolized to acetic acid, the utilization of ethanol could be realized from the point of view of thermodynamics. Acetaldehyde could be hardly detected in the fermentation processes, thus promoting the overall metabolic flux to the direction of ethanol utilization.

We tested different alcohol dehydrogenases and found that only AlcA from A. nidulans could efficiently oxidize ethanol. Enzymes can lower the activation energy (Ea) of a reaction for the reactants to become products. The Ea barrier is different according to the substrates and their binding modes with the alcohol dehydrogenases [35]. Most alcohol dehydrogenases displayed a relatively high Ea value when using ethanol as the substrate [36]. The Ea barrier should be much lower in A. nidulans alcohol dehydrogenase than in other alcohol dehydrogenases for hydride transfer. Therefore, the engineered strain harboring this enzyme could efficiently utilize ethanol as the sole carbon source.

Ethanol can be used as the sole carbon source for cell growth and product biosynthesis in our engineered strains, but there is still a big gap in the growth rate compared with glucose as the carbon source. Glucose is the most commonly used carbon source in E. coli, which enters the central metabolic pathway through glycolysis [37]. The oxidation of glucose to acetyl-CoA generates four NADH and consumes one two ATP \( (\text{G}{\text{lucose}}\, + \, 2 {\text{ CoA}}\, + \, 4 {\text{ NAD}}^{ + } \, + \, 2 {\text{ ADP}}\, + \, 2 {\text{ Pi}}{ \leftrightharpoons } 2 {\text{ acetyl}} - {\text{CoA}}\, + \, 2 {\text{ CO}}_{ 2} \, + \, 4 {\text{ NADH}}\, + \, 4 {\text{ H}}^{ + } \, + \, 2 {\text{ ATP}}) \), while the oxidation of ethanol to acetyl-CoA generates two NADH and consumes one ATP \( ({\text{Ethanol}}\, + \,{\text{CoA}}\, + \, 2 {\text{ NAD}}^{ + } \, + \,{\text{ATP}}{ \leftrightharpoons } 2 {\text{ acetyl}} - {\text{CoA}}\, + \, 2 {\text{ NADH}}\, + \, 2 {\text{ H}}^{ + } \, + \,{\text{ADP}}\, + \,{\text{Pi}}) \) . Although NADH can be further convert to ATP via the tricarboxylic acid (TCA) cycle, the lack of substrate level phosphorylation would significantly hamper the growth rate of the microorganism [38]. Therefore, ethanol cannot be utilized as efficiently as glucose. The study of mixed substrates will be direction for the utilization of ethanol as carbon source.

Conclusions

In summary, an engineered E. coli which could utilize ethanol as the sole carbon source was constructed by heterologous expression of the alcohol dehydrogenase and aldehyde dehydrogenase from A. nidulans. The strain could metabolize ethanol for both cell growth and value-added chemical biosynthesis. Mevalonic acid production was achieved by further introduction of its biosynthetic pathway. Although the production of mevalonic acid was still very low, this study can serve as the basis for the construction of more robust strains for ethanol utilization in the future. Further work will be done to improve ethanol utilization by optimizing the metabolic pathways.

Methods

Enzymes, oligonucleotide primers, reagents and culture media

FastDigest restriction enzymes and T4 DNA ligase were purchased from Thermo Scientific (Pittsburgh, USA). PrimerSTAR Max Taq DNA polymerase was obtained from Takara (Dalian, China). The oligonucleotide primers used for plasmids construction were given in Table 1. The bacterial genomic DNA isolation kit, plasmid extraction kit and DNA gel extraction kit were offered by Omega Bio-tek (Norcross, USA). Mevalonic acid lactone was obtained from Acros Organics (Geel, Belgium). Deuterium-labeled ethanol-D6 was purchased from Aladdin (Shanghai, China). All other chemicals used in this study were of analytical grade. LB media (10 g L−1 tryptone, 5 g L−1 yeast extract, 10 g L−1 NaCl) were used for DNA manipulations. M9 media (Na2HPO4 6 g L−1, KH2PO4 3 g L−1, NH4Cl 1 g L−1, NaCl 0.5 g L−1) were used for shake-flask cultivations. Ampicillin (100 mg ml−1) or chloramphenicol (34 mg ml−1) or both of them were supplemented into the media if necessary.

Table 1 Primers used in this study for plasmids construction
Full size table

Cloning of genes and construction of recombinant plasmids

The bacterial strains and recombinant plasmids used in this study were listed in Table 2. The adhE, adhP and aldA genes of E. coli were amplified from genomic DNA and ligated into the pTrcHis2B vector, resulting pTrc-EcadhE, pTrc-EcadhP and pTrc-EcaldA. PCR reactions were performed using pTrc-EcaldA as the template and primers that allowed amplifying Trc promoter along with the aldA structure gene. Then the TrcEcaldA fragment was cloned into pTrc-EcadhE or pTrc-EcadhP to create pTrc-EcadhEaldA or pTrc-EcadhPaldA. The alcA and aldA genes from A. nidulans was optimized according to the codon usage table of E. coli using an online tool (www.jcat.com), chemically synthesized and cloned into pUC57 vector by BGI (Shenzhen, China). Then alcA and aldA were sub-cloned into the restriction sites NcoI/XhoI of vector pTrcHis2B, creating pTrc-AnalcA and pTrc-AnaldA. The recombinant plasmid pTrc-AnalcdA harboring both alcA and aldA was constructed using a similar strategy. The native E. coli acetyl-CoA synthetase (encoded by acs) was cloned into the expression vector pACYCDuet-1, resulting pA-Ecacs. The recombinant plasmid pA-EfmvaES harboring Enterococcus faecalis mvaE and mvaS (encoding the mevalonic acid biosynthesis pathway) was constructed in our previous work [39]. All recombinant plasmids listed in Table 2 were sequenced to verify the cloning accuracy.

Table 2 Strains and plasmids used in this study
Full size table

Shake-flask fermentation

Shake-flask fermentation was performed in 250 ml Erlenmeyer flasks containing 50 ml M9 mineral media supplemented with glucose or ethanol. Single colonies of E. coli strains harboring different recombinant plasmids were picked from LB agar plate and inoculated into a test tube containing 3 ml liquid LB media. After overnight incubation, the seed culture was inoculated 1:100 into fresh M9 media and cultured at 37 °C. The optical density at 600 nm (OD600) of the culture was monitored and the bacterial cells were induced by 0.2 mM isopropyl β-d-thiogalactoside (IPTG) at early exponential stage. Then the cultivation temperature was shifted to 30 °C. After the initial carbon sources were exhausted, ethanol or ethanol-D6 was added to the culture broth. Samples were taken at appropriate intervals to determine OD600, residual glucose and ethanol, production of acetaldehyde, acetic acid and mevalonic acid during the whole fermentation process. The fermentation experiments were conducted in triplicate.

Analytical methods

Cell density was determined by measuring the OD600 of the culture sample using a Varian Cary-50 UV–Vis spectrophotometer (Palo Alto, USA). The culture broth was diluted appropriately to bring down OD600 to the range of 0.2–0.8. After measurement, the value was multiplied by the dilution factor to achieve the actual OD600.

The concentration of residual glucose was quantified using a YSI 2950D Biochemistry Analyzer (Yellow Springs, USA). The cultures were centrifuged at 12,000 rpm for 1 min to obtain the supernatant. Samples were determined and compared with fresh M9 mineral media in triplicate using the YSI Biochemistry Analyzer.

Ethanol, acetaldehyde and acetic acid in the fermentation broth were determined by gas chromatography (GC). The fermentation supernatant was filtered through 0.22 μm membranes and then directly analyzed by GC. Agilent (Santa Clara, USA) 7890B GC system equipped with a flame ionization detector (FID) and a DB-FFAP column (30 m × 0.32 mm × 0.25 μm) was used for GC analysis. The injector temperature was 250 °C, the FID temperature was 250 °C and the split ratio was 1:10. The oven temperature was programmed as follows: initially held at 40 °C for 5 min, ramped at 20 °C min−1 to 240 °C and finally maintained at 240 °C for 3 min. High-purity nitrogen was used as the carrier gas with a flow rate of 1 ml min−1.

Mevalonic acid was identified by GC–MS as described previously [40]. Bacterial cultures were centrifuged to collect the supernatants. Then the samples were acidified to pH below 2 by the addition of HCI and incubated at 45 °C for 1 h to convert mevalonic acid to the lactone form. The mixture was saturated with anhydrous Na2SO4 and mevalonic acid lactone was extracted with ethyl acetate twice. The organic phase was further dried with anhydrous Na2SO4 and evaporated under nitrogen at room temperature. The dry samples were then dissolved in ethyl acetate and analyzed by an Agilent GC–MS system (7890A/5975C). The GC–MS system was equipped with an HP-5 ms column (30 m × 0.25 mm × 0.25 μm) and using helium as the carrier gas at a flow rate of 1 ml min−1. The column was initially held at 100 °C for 2 min followed by a gradient of 10 °C min−1 to 250 °C and then followed by a final hold at 250 °C for 5 min. The injector was used in the splitless mode at 250 °C. The EI ionizing voltage was 70 eV. Total ion current monitoring was performed at the mass range of m/z 35–300. The peak of mevalonic acid lactone was identified by the retention time of an external standard as well as comparing the mass spectrum with the National Institute of Standards and Technology (NIST) library.