Introduction

The World Health Organization (WHO) provides a global estimate of 35–40 million people who require prosthetics and orthotics services [1], and this demand is increasing due to a range of factors. The growing and aging global population, along with the rising incidence of vascular-related diseases has led to high amputation rates [1,2,3,4]. Urbanisation contributes to an increasing number of traffic accidents, and conflict and war, particularly in the Middle East and East Africa, have caused high rates of traumatic injury leading to amputations [5].

Appropriate prostheses and supporting services can result in improved mobility, function, aesthetics and comfort for the user [6]. Consequently, prosthesis provision can improve the ability of a person with limb absence to generate an income and participate in education and social activities, increasing their quality of life [7]. Prosthesis use may also reduce the severity of some comorbidities, and the medical and support costs associated with them [8].

The WHO recommends that prosthetic service provision should take an integrated approach, which should include fitting the prosthesis, training the wearer, rehabilitation, community support and repair services [9]. However, the WHO also identified that access to prosthetic and orthotic services is a particular challenge, including a lack of service provision, problems with service delivery associated with inadequate staffing or training, lack of funding, and crucially a lack of data and evidence [10]. Indeed, evidence on the best ways to design and distribute prostheses to make them widely accessible, affordable and meet the users’ needs is lacking [11].

Prosthetic service and design decisions are predicated on the assumption that the prosthetic devices are worn and used in users’ everyday lives [12,13,14]. When user centred design principles are used, prosthetic devices are better matched to the user’s needs, leading to better functional outcomes [15]. However, there is currently limited objective data on how much and when prostheses are worn, what tasks they are used for, and what individual adjustments to the design of prostheses would increase their usefulness for the wearer in their environment.

To capture data on everyday use of prostheses, several clinical questionnaires and self-reported surveys have been proposed [16, 17]. Such tools typically ask the respondent to estimate prosthesis use (e.g. hours of wear per day) and/or the set of everyday activities performed (e.g. walking/sitting/community participation) [16, 17]. Questionnaires that rely on self-reported measures are time-consuming for clinicians to administer and for users to complete. They provide only summary data, and lack accuracy because they are limited by the users’ comprehension and interpretation of the questions, their social bias and their recall [13]. Further, in countries where access to secondary or higher education is limited, users’ literacy and numeracy levels can be a barrier to the efficacy of questionnaires. In order to evaluate how well a prosthesis is meeting users’ needs, it is essential that users’ voices are included in the assessment and that qualitative research methods are used. However, digital technologies that can objectively monitor the use of prostheses offer a complementary approach to these other assessment methods for understanding the effectiveness of different prosthetic designs, componentry, and rehabilitation and lifestyle interventions [18,19,20,21]. There is a large body of literature on activity monitoring, but little has looked at measuring the activity of people who use prostheses [22,23,24]. Previous reviews of studies that monitor the physical activity of people with limb absence have focused on the lower-limb and on the application of activity monitoring techniques, using sensors to compare prosthetic componentry [18], and assessing the physical and mental health benefits of physical activity [25].

This paper is intended to have general relevance to people who use prosthetic devices, but was motivated in particular by collaborative research towards addressing the global challenges around prosthetics services in low-resource settings and lower- and middle-income countries (hereafter grouped as low-resource settings). The review discusses the challenges around the assessment of prosthetic device use in low-resource communities. Whilst advanced movement analysis methods such as motion capture offer detailed insights into gait quality, such facilities are rarely available in low-resource settings and service providers report a greater need to assess more general patterns of longer-term prosthesis use [26, 27]. People may receive training to use their prosthesis in a clinic, but their continuing use after returning home is completely unknown, as is the potential change in physical behaviour which their prosthetic device may enable.

Therefore, this paper reviews the scientific literature on methodologies and technologies that have been used to assess the community-based, daily use of both upper- and lower-limb prostheses. It discusses the types of studies that have been undertaken, the technologies used to monitor physical activity, the benefits of monitoring daily living and the barriers to long-term monitoring.

Methodology

Search strategy

This systematic literature review employed a search of publications up to November 2019. Five databases (PubMed, Web of Science, Scopus, CINAHL and EMBASE) were used to search for relevant articles using three groups of keywords to collect all studies that monitored the activity of prosthesis users during daily-living.

Community-based activity

“daily living” OR “free living” OR “daily life” OR “real world” OR activit* OR mobility OR “prosthetic use” OR “home use” OR “real life” OR “daily use”.

AND

Population of interest

“artificial limb” OR “artificial leg” OR “artificial arm” OR (prosthe* OR amput* AND (limb OR leg OR arm OR hand OR wrist OR elbow OR foot OR ankle OR knee OR transradial OR trans-radial OR transhumeral OR trans-humeral OR transtibial OR trans-tibial OR transfemoral OR trans-femoral)).

AND

Sensor for monitoring activity

actimetry OR sensor OR monitor* OR “inertial measurement unit” OR IMU OR acceleromet* OR gyroscope OR magnetometer OR “global positioning system” OR GPS OR “step count” OR pedometer OR “cadence” OR “steps/” OR “steps per”.

Study selection

EMA and LD undertook the systematic search. After removing duplicates, the title and abstract of each publication were reviewed to determine its relevance. Any papers that did not report first-hand on digitally monitoring the activities of prosthesis users in a community setting (i.e. outside the lab or clinic) were excluded. Conference abstracts that did not link to a full conference paper were also excluded. Where the relevance was not clear from the title and abstract, papers were read in full to determine inclusion. For each included paper, the reference lists and forward citation reports from each database were consulted in order to identify additional relevant articles that were not found in the automatic search. Many of the reasons for monitoring prosthesis use are also relevant to the field of orthotics and orthosis use. However, inclusion of papers associated with orthotics was beyond the scope of this review.

Analysis of studies

The papers were categorised by study type (words in italics are used as category abbreviations):

  • Studies that developed or validated activity monitoring devices, algorithms and/or metrics for activity description, intensity and/or classification.

  • Studies that compared metrics reflecting activity levels to clinical scores.

  • Studies that compared interventions (including prosthetic components and lifestyle interventions).

  • Studies that compared predefined populations.

Information was collected from each included paper on the aim and main findings, the population, sample size, types of sensors, locations of sensors, duration of the assessment, types of activity detected and amount of prosthesis use. The analysis divides the level of limb absence into four types; below-knee, including trans-tibial, Syme’s and partial-foot (BK), above knee, including trans-femoral, knee and hip disarticulation (AK), below elbow, including trans-radial, wrist disarticulation and partial-hand (BE), and above-elbow, including trans-humeral, elbow and shoulder disarticulation and forequarter (AE).

For 25% of the included studies, a double-blinded triangulation method was used to complete the analysis. The papers were divided up between 9 of the authors so that the classification of the papers into type of study and information collected from each paper could be compared between reviewers, reducing the risk of bias. All papers authored by members of the team were reviewed by a minimum of two reviewers to minimise potential bias. There were few disagreements during the double-blinded process, and these all occurred in determining the primary category for papers that fitted into multiple categories. Therefore, LD and AD reassessed lower-limb papers that fitted into multiple categories and AC and LK reassessed the categories of the upper-limb papers to ensure a consensus was reached for all studies.

Results

The search found 2793 papers across the 5 databases (Fig. 1). After removing duplicates, 1716 papers were screened by title and abstract. Of these, 57 lower-limb studies and 5 upper-limb studies were identified as relevant. An additional 3 lower-limb studies and 4 upper-limb studies were found through analysis of the references and citations of the included papers. Therefore, a total of 69 papers met the inclusion criteria, including one that was not in English, but was in French and able to be analysed by the authors [28].

Fig. 1
figure 1

Flow chart of selection and sorting method

Full size image

Studies were categorised into the 4 topics, based on the primary reason for monitoring physical activity in the paper. Several articles addressed more than one of the topics for classification. In these cases, the authors conferred to find the main focus of the paper and placed the paper in that category. However, within this manuscript, where the body of evidence for each category is discussed, all papers that fitted the topic are included, even if it was not the primary focus of the paper. From the lower-limb studies, 43% focused on interventions, typically comparing prosthetic components. In contrast, the small number of upper-limb studies were fairly evenly spread between the following categories: algorithms, clinical scores, and populations.

Table 1 gives an overview of each paper included in the review, separated into topics. Many of the papers compared K-levels; a standard for classifying an individual’s functional status, as defined by Medicare [29].

Table 1 Overview of each paper included in the review. Sensor locations: A = anatomical, P = prosthesis, L = liner.
Full size table

The 13 papers on developing or validating actimeters, algorithms or scores for activity classification for lower-limb prosthesis users mainly focused on development of sensors for monitoring activity [34, 35, 37, 39, 42]. However, they also included development of smart-phone software to monitor falls [40] or visualise gait [97] and papers on comparing sensors [31, 98], validating sensors [38] and validating classification methods [30]. In the case of upper-limb studies, three papers related to the development of algorithms for the assessment of activity [32, 33, 41]. Two of these papers reported on the use of head mounted cameras for the development of grasp taxonomies [32, 41]. The third paper reported on new techniques for the visualisation of data from wrist worn accelerometers, used to assess the relative levels of activity of the intact and prosthetic limbs [33].

The 27 papers on comparing interventions for lower-limb prosthesis users mostly compared prosthetic components, rather than comparing lifestyle interventions. Studies compared different sockets [66, 79, 84], suspension systems [68, 78], knees [12, 64, 72,73,74, 87], pylons [65] and feet [63, 70, 76, 82, 83, 88, 99]. One study compared knees and pylons [77], and one compared torsion and rigid adapters [85]. These studies focused mainly on the effect of prosthetic components with different mechanical characteristics from different manufacturers on the amount the prosthesis is worn, and the physical activity level of the wearer. None of the studies that compared prosthetic feet found significant differences between components. Likewise, most of the studies comparing other aspects of componentry (e.g. pylons and sockets) did not find significant differences with respect to the users’ performance between the different components analysed (measured using steps/day, various gait measures, falls, skin temperatures, lab-based performance measures or self-report measures). However, some of the studies on prosthetic knees showed differences between types, and the two studies that compared suspension systems found differences in wear-time, steps/day, pistoning, activity levels and user opinion. Only one intervention study was identified from the set of upper-limb studies and this used a log of grasping events to explore the effect of sensory feedback on use over time [71].

The lifestyle interventions for lower-limb prosthesis users were aimed at promoting physical activity [67, 69, 81], providing rehabilitation [86] or providing massage [80]. These all showed positive outcomes, from increased daily step counts [67] to weight loss [81] and decreased pain levels [100].

Seventeen papers compared activity levels of lower-limb prosthesis users to clinical scores. The most frequently used clinical score that was compared with measured everyday activity was the K-level score [30, 43, 44, 49,50,51, 54, 55, 57, 87, 89, 94, 95]. There was good correlation between the K-level score and the number of steps taken in everyday life [30, 43, 44, 49, 54, 55]. The general consensus was that monitoring participants in their daily life might provide a complementary analysis to better assess the capabilities and prosthesis requirements of individuals by providing activity levels, wear time and potentially gait characteristics, alongside subjective scores like satisfaction [30, 43, 44, 49, 50, 54, 55, 95]. The upper-limb papers that included a comparison to clinical scores were more varied in their focus. Two papers recorded the time that a sensory feedback system was powered on and assessed the effect on number of grasp events recorded, a variety of clinical scores and a selection of psychosocial and functional outcomes [47, 71]. One compared a participant’s selection of hand grips between a lab-based assessment and during everyday use [58]. In line with the findings of the lower-limb papers, the fourth upper-limb paper highlighted the complementary nature of the real-world assessment, emphasising how measures of everyday upper-limb symmetry and prosthesis wear time appear unrelated to performance measured using in-lab approaches [46].

The 7 papers comparing lower-limb prosthesis user populations ranged in topic. One compared those with an amputation to an anatomically intact control group [90], one compared those with diabetes to anatomically intact participants with and without diabetes [96], some studies compared different K-levels [89, 95], or amputation levels [28, 93], and one compared individuals with a history of falls to those without [94]. The main findings were that prosthesis users were less physically active than anatomically intact controls, and individuals with vascular disease, above-knee amputation or lower K-levels were less physically active, compared to those with traumatic injury, below-knee amputation, or higher K-levels, respectively. All 4 upper-limb papers which related to the population category were output as part of the same research study; these papers compared the symmetry of upper-limb activity between those with limb-absence and anatomically intact control participants [33, 46, 91, 92]. The results showed that the upper-limb activity of prosthesis users is heavily biased towards the anatomical limb, but in anatomically intact controls activity is quite evenly distributed between the dominant and non-dominant limbs.

The upper-limb studies varied in the types of sensor used for monitoring activity. These methods of assessing activity were grouped into four topics [1]: use of head-mounted video cameras to generate grasp taxonomies [32, 41] [2], use of wrist-worn accelerometers to measure aspects of symmetry in upper-limb activity and prosthesis wear time [33, 46, 91, 92] [3], use of on-board sensing to evaluate choice of grasp [58], and [4] use of on-board sensing to evaluate the use of a sensory feedback system and the number of grasp events [47, 71]. During the review process, five other studies evaluating the upper-limb activity of prosthesis users were identified, however these were excluded from the main review due to assessing all upper-limb activity (as opposed to just the use of the prosthesis) [101, 102], or because they were only undertaken as lab-based studies [103,104,105].

The majority of lower-limb studies used body-worn accelerometers. However, 5 used in-socket sensors [35,36,37, 39, 45], 4 used GPS in addition to accelerometers [38, 49, 94, 95], and 2 used phone-based accelerometers [40, 43]. The most commonly used actimeter in the lower-limb studies was the StepWatch, which counts steps but does not classify the type of activity. Some clinic-based studies included activity classification [13, 106, 107], but most community-based studies only assessed activity by counting steps per minute or per day. The studies that classified the type of activity, used activity monitors with sampling frequencies that ranged between 10 Hz and 60 Hz. The activities were typically classified using thresholding. The one study that compared classification techniques only addressed fall detection, rather than a range of physical activities [40].

The number of publications relating to the digital monitoring of everyday prosthesis use has been gradually increasing over the past 25 years, with publications in the upper-limb field approximately 10 years behind those in the lower-limb field (Fig. 2). Unsurprisingly, papers discussing the development of algorithms were among the first to be published. However, it is interesting to note that papers relating to interventions came in very early in the lower-limb field, with population-based studies coming in more recently.

Fig. 2
figure 2

Number of publications per year (grouped into 2-year bins). a Overall number of publications, (b, c, d and e) Lower- and upper-limb publications separated into subplots by main topic

Full size image

Most studies recorded data for between one and 2 weeks (Fig. 3). Studies lasting for less than a week were generally those concentrating on the development of actimeters and algorithms, whilst studies lasting for more than 1 month were generally the intervention-based studies. Studies that compared activity monitoring to clinical scores or that compared populations typically used a 7-day protocol. Only three studies lasted for longer than 3 months.

Fig. 3
figure 3

Recording period for studies split by main focus

Full size image

Discussion

This discussion focuses primarily on monitoring everyday lower-limb prosthesis use, representing the majority of the identified studies. However, with upper-limb studies starting to appear in the last decade, the focus of these are also discussed, particularly in relation to how the field may develop in the next decade in light of the trends in lower-limb research. It is worth noting that many of the findings from the lower-limb papers are also relevant to the upper-limb, for example, comments around sample size. The review’s motivation of community-based activity monitoring in low-resource settings is also addressed in each section, informed by the long-term experience of prosthetics service provision by our co-authors from Cambodia, Uganda and Jordan.

Appraisal of studies by classification

Developing and validating actimeters, algorithms or scores for activity classification

There were few papers that developed ways to accurately monitor lower-limb prosthesis use with more detail than a simple step-count, and few that collected information on the types of activities being performed. This review shows that step detection methods have been well-established and are consistent across actimeters, though less accurate at low walking speeds [30, 108]. Step-count can be a useful indicator of exercise, but it does not provide information on the types of activities people with lower-limb absence can participate in and those that still have a barrier to access. Understanding the types of activity performed and whether someone is using transport (from accelerometer data) or leaving the house (from GPS data [38, 94, 95]) can provide an indication of community participation or isolation, which is often a significant issue for people with limb-absence, and can reveal information on physical functioning and gait quality [109, 110]. Body postures, such as sitting versus standing, also affect residual limb shape and volume. Understanding these changes better could improve socket fitting processes and the measurement of outcomes [111]. The ability to detect donning and doffing is also useful for understanding whether a prosthesis is meeting the user’s needs and may give more specific indications, such as physical and/or thermal comfort [39, 45, 112]. Changes in daily prosthesis wear time or the types of activity undertaken over time might provide an early warning of changes in socket fit and tissue health.

There are inertial measurement units that are pre-programmed to classify activities, such as the activPAL (PAL Technologies, Glasgow, UK) and the ActiGraph (ActiGraph LLC, Pensacola, USA). Studies have used these activity classification methods in a laboratory setting [13, 106, 107], but only a couple have used these methods to monitor activity in the community [45, 90]. These activity classification algorithms have mostly been designed for use with sensors worn on the thigh (ActivPAL), the wrist and the waist (studies have used the Actigraph at varying locations but the wrist and waist have the most validation). For long-term monitoring of prosthesis use, the authors suggest that embedding a sensor in the cosmesis of the prosthesis may enable longer monitoring periods, as it would remove the discomfort of having a sensor taped or strapped to the skin and the user would not need to remember to wear it, improving wear compliance. All prostheses can have a sensor attached to them, but not all have the capacity for the sensor to be embedded, given limited space available in the cosmesis. Certain types of sensors are bulky or have a wrist strap, which may make them unsuitable for embedding in the cosmesis or the wrong size to attach to locations other than the wrist. The lateral side of the shaft of a lower-limb prosthesis, just above the ankle, often has space to embed a sensor, and the authors have successfully embedded activPAL and Axivity sensors at this location on various styles of transtibial and transfemoral prosthesis. Attaching the sensor to a stable interface, such as the shank or socket rim minimises noise in the signal. It would be useful to develop algorithms that can detect the type of activity from a sensor located below the knee, so they can be used with below-knee prostheses. The ActiGraph has only a few studies that used the sensor on the ankle to classify activity, and these had low classification accuracy [113]. Sanders et al. [60] have presented some initial activity classification data from a sensor on the prosthetic ankle, whilst Redfield et al. [114] have also developed an algorithm for classifying activities from the prosthetic ankle, but it has not been tested in a daily-life setting [60, 90].

Considering upper-limb prostheses, prosthesis wear time is a key outcome, as if the user does not find the prosthesis to be of value, then it will not be worn. Detection of prosthesis wear/non-wear from accelerometry signals is complex and there is currently no validated upper-limb prosthesis non-wear algorithm. ActiGraph sensors offer two algorithms for the detection of sensor non-wear (“Troiano 2007” and “Choi 2011”), however both measures were developed based on data from hip-worn sensors and these would likely overestimate wear in the case of prostheses [115]. Chadwell et al. [46, 92] published a non-wear algorithm designed to detect prosthesis wear/non-wear using data collected from wrist-worn sensors and compared the calculated wear time to self-reported wear periods, however, this algorithm would require further validation before it is widely accepted. One of the main issues with detecting non-wear of a prosthesis is that the prosthesis can be removed and carried. Additional sensors such as a pressure, lux, or temperature transducer within the socket could offer a potential gold standard for prosthesis wear [105]. Until validated methods of automatically detecting aspects of prosthesis wear and use are available, self-report activity diaries offer an important complimentary measure.

It is important to note that the upper-limb papers reported data on the movements of the arms, or the number of different grasps performed over a specified period. Neither of these measures on their own provide a complete picture and an understanding of both when the prosthesis is worn and how much it is used. For an upper-limb prosthesis there are many aspects of use to consider, including: is the arm used? Are the arm movements similar to those of an anatomical arm or do they reflect compensatory movements? Are the active capabilities of the hand, such as grasping, being used and if so, to what extent? Although the field is in its infancy, many of these issues are beginning to be explored by different groups and hence there is great potential to combine techniques. For example, by combining accelerometry for the detection of arm movements with recordings of grip choice and frequency of use, comparisons could be made with studies of upper-limb activity in anatomically intact populations [116]. Comparing measures such as ‘system-on time’ against prosthesis wear time also make it possible to understand the value of advanced systems such as sensory feedback [47, 58]. It is worth noting that advanced multi-articulating upper-limb prostheses often log data on, for example, the grasps selected, or time powered up, and making these data available in a common and accessible format would help to move the field forward.

Accelerometers were the main type of sensor used in the studies to monitor physical activity. None of the studies monitored for more than a month without the participant returning to the clinic regularly to have the data downloaded, and there have been no longitudinal studies, such as studies that compare the level of activity of a first-time prosthesis user with their level of activity on their second or third prosthesis. Commercial accelerometer-based sensors are useful for research purposes, and the data recording capacity and battery life are increasing. However, they are still limited to a maximum of 3–6 months of recording time before the data needs to be downloaded and the battery recharged or replaced. These limitations, along with the expense of sensors, make them currently impractical for standard clinical use, particularly in low-resource settings. Cloud storage and inductive charging in areas with regular access to internet and reliable electricity may make long-term recording feasible.

Comparing prosthetic components and intervention strategies

A substantial portion (1/3) of the lower-limb studies focused on comparing prosthetic components. This is unsurprising, given the importance of increasing comfort and function of prostheses, along with improving access and affordability.

Most of these studies that compared prosthetic components did not find clinically significant results. This is not necessarily because there is no difference between the products, but is more likely because of the limited sample sizes, the wide variability between individuals that make it difficult to match controls, the limited time-frames for comparing results, and the insensitivity of the compared outputs (most only looked at step-count, not activity or gait quality). Small sample-size is a common issue in the field of prosthetics, as it is difficult to recruit large participant cohorts from the small limb-absent population [117]. One way to help address this issue is to develop a commonly-agreed framework for reporting participant characteristics, clinical outcomes and the engineering characteristics of the components tested, so that comparisons can be made across studies and the foundations laid for big data approaches [118]. Strengthening the partnerships and collaborations between academic institutions, the prosthetics industry, clinics, hospitals and societies of people with limb absence is important for ensuring research is informed by an understanding of the users’ needs, and that the research outputs inform changes in clinical practice. Having strong links within the prosthetics community, and empowering end-users to contribute to the research should also assist with recruitment.

Many of the studies ran the different interventions on the same participants so that each participant was their own control, to overcome the challenges of finding a well-matched control. However, this has its own limitations, as the order of testing the interventions can affect the outcomes, due to training effects, and the time of week or season might affect activity levels and types (i.e. due to weather, working patterns and religious practices such as Ramadan).

There were few studies that assessed lifestyle interventions for people with lower-limb absence, but the positive results, particularly in interventions to promote physical activity, demonstrate the importance of an inter-disciplinary approach to providing rehabilitation and community support, rather than simply providing the prosthetic device [67, 69, 80, 81, 86].

The role of inter-disciplinary rehabilitation begins before prosthetic fitting and continues after the prosthesis has been provided. Sensors that monitor non-use could also be useful for assessing issues with prostheses, to help identify where better training and/or support is needed, and to help prioritise where clinicians focus their efforts.

Comparing activity levels to clinical scores

In the lower-limb studies, the main clinical score that everyday activity levels were compared to was the K-level score [30, 43, 44, 49, 50, 54, 55, 95]. K-levels are the standard for classifying an individual’s current and potential functional status, particularly regarding ambulation. This classification was developed in 1995 and there is no gold standard method for establishing K-Levels [29, 119]. The common suite of tests used are clinic-based, providing information on the ability of the individual, rather than on their everyday functionality and needs. The ability level of the individual when ambulating in a clinical environment does not necessarily match how much they ambulate in their typical environment [55]. Nevertheless, the studies reviewed in this paper found that participants’ everyday physical activity mostly correlated with the K-level scores. However, monitoring participants in their daily life provided additional information that could complement the clinical measures to provide clinicians with a clearer picture of the individual’s capabilities and requirements. For example, the clinical K-level classifications were based on a physical examination at a single point in time, informed by clinical experience and subjective activity reports from the patient and family, whereas community activity monitoring increased the objectiveness in selecting suitable prosthetic components, adding a continuous element to assess changes in activity level over time [49, 54]. Community monitoring offers repeatable, objective criteria of functional level, based on the individual’s daily activities and environment.

Comparing different populations

The papers on comparing populations with lower-limb absence ranged in topic, but all demonstrated that there are significant differences between individuals and populations, so a one-size-fits-all method to providing prosthetics and services is not appropriate for meeting user needs. Of particular note in these studies was that people with vascular disease consistently showed lower levels of physical activity, so exercise-based interventions are possibly particularly important among this population. Few studies compared populations with BK limb absence to those with AK limb absence, but those that did found that individuals with AK limb absence walked fewer steps per day [93], walked for less time per day [28] and walked more slowly [52]. The characteristic of gait also differed, with AK individuals having a greater mean step width than those with BK limb absence [52]. Individuals with BK limb absence had higher activity levels on weekdays than weekends, but this difference was not observed in individuals with AK limb absence [77].

Activity monitoring for low-resource settings

Benefits of activity monitoring in community-based settings

Ultimately, the measures of success for any prosthesis are whether the user chooses to wear it and use it to perform the functions it was designed for. In the case of lower-limb prostheses, the primary function is safe ambulation and in the upper-limb, it is prehensile function and the ability to locate and orient the prehensor in the reachable workspace. While there are many lab-based assessment studies investigating the extent to which particular prosthetic devices restore gait quality or upper-limb function, this review suggests that further work is needed to understand real-world needs and physical activity practices of prosthesis users and the factors which influence them.

In low-resource settings, public limb fitting centres and NGOs can only provide prostheses with basic functionality for a limited number of people annually, leaving hundreds or thousands of people waiting [1]. Furthermore, prostheses often require replacement after about 3–5 years due to wear and changes in residual limb size and shape. There are challenges worldwide around collecting meaningful measures of prosthetic rehabilitation outcomes, with some clinicians overwhelmed by their outcome measure workload and others performing only subjective evaluation of functional activity at the time of discharge [120]. Activity monitoring and gait assessment can perhaps provide direct measures of prosthesis use and therefore help the decision-maker to decide the appropriate type of prosthesis for an individual and the point at which to replace the prosthesis. Over a longer term, with larger datasets, service providers may use this approach to provide a cost effectiveness assessment of different prosthetic devices, and appraise new components.

Beyond amount of use, activity monitoring methods also offer an objective insight into how a prosthesis has been used. Currently, users retrospectively report about their experiences when they are seen by a healthcare professional. In low-resource settings, factors including a shortage of prosthetists and a lack of transport for those based in rural communities mean that it can be a long time before feedback is given to the provider [121]. Consequently, often users will remember only the very bad experiences, biasing their reports. Conversely, in some cultures service users will provide little negative feedback, especially where prosthetic devices have been given to them free of charge. In both situations, they may experience worsened musculoskeletal health and soft tissue injuries by needing to wear an ineffective prosthesis for longer. In some facilities, NGOs have developed community outreach programs where they provide assessment of prosthesis use among other services. If it was possible to monitor prosthesis use remotely, this could help to inform the decision-making process, and provide earlier intervention for users experiencing problems, as well as identifying devices with high rates of successful use. Real-time monitoring may even allow identification of users experiencing acute injury or mental health problems, evidenced by sudden changes in activity level or type [122, 123].

Barriers to activity monitoring

Despite the potential benefits of activity monitoring, barriers remain, associated with cost, access, training and capacity, as well as technical and cultural aspects of their use. Although commercial activity monitors are readily available in high resource settings, their cost-benefit balance must be considered in low-resource settings, especially with regard to widespread, real-time assessment. Adding embedded sensors to prostheses, and arranging for mobile or periodic connectivity may make them unaffordable for the services and users needing them most [124]. Furthermore, this would also require robust access to communication and information technology in low resource settings and for people with disabilities. Barriers to communication and challenges with accessing clinics (e.g. due to cost or availability of transport, and ability to take time off work) mean that in low-resource settings, losses to follow-up are likely to be more common. The cost associated with the potential loss of sensors may be particularly significant for clinics and researchers in low-resource settings. This emphasises the need for low cost appropriate monitoring technologies.

In both high and low-resource settings, many of the algorithms used to analyse gathered activity data are not user-friendly and require at least basic skills in programming and signal processing. Some fast, user-friendly analysis tools do exist, as in consumer activity monitors, but these represent an addition to busy clinicians’ workloads, where there are limited human resources and access to appropriate tools to undertake effective monitoring. More complex service-wide data analysis is in many instances time consuming, and requires specialist epidemiology training and statistics knowledge, which makes it impractical for clinical settings. Perceptions about how useful the information gathered from outcome measurements is for improving services for people with limb absence varies between countries, and countries that struggle to financially support systemic changes often see little value in gathering data on outcome measurements.

There is still a need to train clinicians in measuring outcomes, particularly in objective evidence assessment, multidisciplinary team integration and technology transfer. Client education is also essential for them to be able to participate fully and provide useful feedback, especially in low-resource settings. The training of clients must be accessible across varied literacy levels, as well as being culturally aware and co-designed using participatory research methods.

Evaluating prosthesis use in low-resource settings has challenges beyond access to measurement tools, limitations of current measuring tools, and the training of clinicians in how to use these tools. In Jordan, for instance, lower- and upper-limb prostheses are rarely evaluated, not due to the lack of awareness of the importance of the evaluation procedure, but rather due to the difficulty of implementing any rehabilitative intervention informed by the results of evaluation. The number of people with limb absence, and the lack of accessibility of limb fitting centres and of trained inter-disciplinary rehabilitation teams to deal with prosthetic training and problem solving were identified as key prosthetic and orthotic service access barriers by the WHO in 2011 [26, 125], and are issues in many countries.

Culture also affects the every-day use of activity monitors. It is important to have well-trained professionals and clinicians who understand the context and activities-of-daily-living of the assessed group to interpret the data. For example, considering activity types, the reviewed studies did not differentiate between social/community activities and work-related activities, nor did they evaluate the context of such activities. There are complex and nuanced links between disability, poverty and health [126]. In low-resource settings without social support systems, if a person is active because they must be active (work, school, child care, or other responsibilities), then activity may not relate to the function and comfort of the prosthesis. The reviewed studies showed diversity in location and type of data collected, but it would be useful to include in future studies the ethnography of participants to assess whether particular groups and lifestyles are more physically active, regardless of the prosthetic components available.

User-centred development of activity monitoring technology and methods must consider the prosthesis user as well as the clinician. In the present review, no articles reported on the user’s acceptability of the actimeters. It is important to understand the needs and ergonomic factors related to the use of actimeters. Monitoring tools which are bulky or not concealed within the prosthesis may be intrusive for users if they raise questions about what they are. Furthermore, monitoring an individual’s activities may be seen in some cultures as an invasion of privacy, so it is important for individuals to consent to what data is collected, how their data is used and to who has access to it [127, 128].

Recommendations for future research utilising activity monitors to track prosthesis use

There have been few studies exploring psychological aspects, such as prosthesis embodiment [129], sensory preference [130] and attitudes of communities to disabilities [131] on wear and use of prostheses. It would, therefore, be useful to collect long-term data on community-based activities, particularly in regard to community participation and isolation, which is a common issue found amongst prosthesis users, and has been linked to quality of life scores [17, 132]. Physical activity monitoring in the community may also enhance knowledge of the links between physical activity and other factors, including prosthetic socket fit for comfort, function and reducing energy consumption. Socket fit plays a significant part in successful rehabilitation and restoration of function and mobility, but tools to objectively evaluate socket fit are lacking [133].

Most studies did not report on factors such as the weather, time-of-week, season or whether a walking aid was used. Factoring in these other aspects can provide greater understanding of the variations in an individual’s activity, and provide better support for clinical scores and prosthetists’ decisions. Some upper-limb studies assessed wear-time [33, 46, 91, 92], but most lower-limb studies did not. Wear-time, in addition to the total amount of activity, could give a better indication of whether there are issues with prosthesis comfort and whether users find a prosthesis beneficial in all situations, or only in certain situations (for example, many may use a prosthesis in public but not in private, or only outdoors, not indoors). The studies also did not report on durability or waterproofing of the sensors, which has particular relevance for sanitation chores, such as hand washing clothes [134], and for long-term-use assessment in rainy or humid environments.

Development of algorithms that allow sensors to provide detailed movement analytics, including information on gait symmetry, stability for safe ambulation, stride length, compensatory movements and upper-limb movement analytics could provide additional information to inform clinicians as they plan rehabilitation and exercises for prosthesis users, to increase prosthesis functionality. When selecting sensors to monitor physical activity, it is recommended by the authors that sensors are used that allow access to the raw data, as this enables bespoke data processing and study reproduction without the limitations of specific manufacturers.

Long-term monitoring of prosthesis-use and developing shared datasets supported by metadata standards may provide early warning of changes in socket fit and tissue health, enable comparisons to be made across studies to assist service providers in assessing prosthetic components, and help identify the unmet needs of prosthesis-users [135].

Conclusion

This review has characterised scientific literature on methodologies and technologies that have been used to assess the community-based, daily use of upper- and lower-limb prostheses. The number of publications has increased over the past 25 years with publications on lower-limb being the primary focus, and upper-limb papers approximately 10 years behind. Research has utilised technology to assess step-counts as the primary measure of lower-limb prosthesis-user activity, and symmetry between the arm with the prosthesis and the intact arm for upper-limb prosthesis users. Community-based activity monitoring has been useful in evaluating prosthetic components and intervention strategies, comparing different populations and providing clinicians with a clearer picture of the individual’s capabilities and requirements than clinical measures alone.

The authors recommend a synchronised approach to developing a framework to monitor prostheses use outside the clinic that takes into account the daily life contexts in low-resource settings, where data on community-based prosthesis use is predominantly lacking. The field of prosthetics research would benefit from embracing technology for monitoring prosthesis use outside the clinic, as it can enable the formation of a framework and the accumulation of data and evidence that is necessary to design devices better matched to users’ needs and accounting for their real-life environments. Community-based activity monitoring of prosthesis users could provide many benefits for researchers, clinicians and end-users but the technology and current rehabilitation service systems still have barriers to long-term monitoring.