Abstract
One-dimensional nanostructures, including nanowires, nanorods, nanotubes, nanofibers, and nanobelts, have promising applications in mesoscopic physics and nanoscale devices. In contrast to other nanostructures, one-dimensional nanostructures can provide unique advantages in investigating the size and dimensionality dependence of the materials’ physical properties, such as electrical, thermal, and mechanical performances, and in constructing nanoscale electronic and optoelectronic devices. Among the one-dimensional nanostructures, one-dimensional perovskite manganite nanostructures have been received much attention due to their unusual electron transport and magnetic properties, which are indispensable for the applications in microelectronic, magnetic, and spintronic devices. In the past two decades, much effort has been made to synthesize and characterize one-dimensional perovskite manganite nanostructures in the forms of nanorods, nanowires, nanotubes, and nanobelts. Various physical and chemical deposition techniques and growth mechanisms are explored and developed to control the morphology, identical shape, uniform size, crystalline structure, defects, and homogenous stoichiometry of the one-dimensional perovskite manganite nanostructures. This article provides a comprehensive review of the state-of-the-art research activities that focus on the rational synthesis, structural characterization, fundamental properties, and unique applications of one-dimensional perovskite manganite nanostructures in nanotechnology. It begins with the rational synthesis of one-dimensional perovskite manganite nanostructures and then summarizes their structural characterizations. Fundamental physical properties of one-dimensional perovskite manganite nanostructures are also highlighted, and a range of unique applications in information storages, field-effect transistors, and spintronic devices are discussed. Finally, we conclude this review with some perspectives/outlook and future researches in these fields.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Avoid common mistakes on your manuscript.
Review
One-dimensional perovskite oxide nanostructures, including nanowires, nanorods, nanotubes, nanofibers, and nanobelts, have attracted much attention from scientists for their unique physical properties dependent on the size and dimensionality [1–5]. They are also expected to play important roles as both interconnects and key units in nanoscale electronic, optoelectronic, electrochemical, and electromechanical devices [6–8]. As compared to the zero-dimensional perovskite oxide nanostructures (or quantum dots) and two-dimensional perovskite nanostructures (or quantum wells), the research progress of one-dimensional perovskite oxide nanostructures has been slow until very recently, as hindered from the problems in fabrication and synthesis of these nanostructures with well-controlled dimensions, uniform sizes, phase purity, and homogenous chemical compositions. In recent years, many physical techniques such as advanced nanolithographic techniques (e.g., electron beam or focused ion beam (FIB) writing, proximal probe patterning, AFM lithography, X-ray, or extreme UV lithography) have been developed to fabricate one-dimensional perovskite oxide nanostructures with controllable sizes and morphology [9–14]. In the meantime, chemical synthesis approaches are also developed to synthesize one-dimensional perovskite oxide nanostructures with controllable sizes and morphology, crystalline structures, and chemical compositions, which provide an alternative and intriguing strategy for producing one-dimensional perovskite oxide nanostructures in terms of material diversity, cost, throughput, and the potential advantage of high-volume production [15–18]. Up to date, several reviews on one-dimensional perovskite oxide nanostructures have been published, which provide an overview of research directions in synthesis and applications of one-dimensional perovskite oxide nanostructures [19–22]. For example, the review from Rørvik et al. presents an excellent summary of the current status of one-dimensional perovskite ferroelectric nanostructures [19]. The reviews contributed by Zhu et al. are focused on the synthesis, structural characterization, fundamental physical properties, and applications of perovskite oxide nanotubes and nanowires, respectively [20, 21]. A review on the behavior of one-dimensional perovskite oxide nanostructures, their properties, and the different fabrication approaches to achieve such structures is also available [22]. Among the one-dimensional perovskite oxide nanostructures, one-dimensional perovskite manganite oxide nanostructures (in the forms of nanorods, nanowires, nanotubes, and nanobelts) play important roles in scientific researches and applications in microelectronic, magnetic, and spintronic devices due to their unusual electron transport and magnetic properties. Recently, the research progress on the electronic phase separation in low-dimensional perovskite manganite nanostructures (e.g., nanoparticles, nanowires/nanotubes, and nanostructured films and/or patterns) is reported [23]. In this work, we focus on the recent research activities in the one-dimensional perovskite manganite nanostructures, which provide a comprehensive review of the state-of-the-art of the one-dimensional perovskite manganite nanostructures that covers their synthesis, characterization, transport properties, and applications. Finally, we conclude this article with some perspectives and outlook.
Synthesis Techniques for One-Dimensional Perovskite Manganite Nanostructures
Up to date, a variety of techniques are developed to fabricate one-dimensional perovskite manganite nanostructures. Basically, these approaches can be classified into two strategies: (i) physical approach and (ii) chemical approach [5–7]. In the physical approach, one-dimensional perovskite manganite nanostructures are patterned from bulk or film counterpart materials by a combination of lithography and etching. The chemical approach, in which one-dimensional perovskite manganite nanostructures are assembled from basic building blocks such as atoms or molecules, much like the way nature uses proteins and other macromolecules to construct complex biological systems, represents a powerful alternative approach to conventional physical methods. In this section, we briefly describe various techniques used for fabricating one-dimensional perovskite manganite nanostructures.
Physical Approaches
Photolithography
Photolithography is an advanced technique to fabricate nanopatterns on substrates coated with polymer materials by mechanical force or sputtering technique. As it can manufacture extensive patterning tautologically, photolithography techniques have the advantages of being practicable, efficient, and economic [24–26]. For example, to understand the role of electronic phase separation (EPS) in the emergent transport behaviors of one-dimensional manganite structures, La0.33Pr0.34Ca0.33MnO3 (LPCMO) nanowires were fabricated from a single-crystalline LPCMO thin film via optical lithography, where the width of the manganite wires is reduced to a scale on the order of the inherent phase separation [24]. It is found that by reducing a single-crystal LPCMO thin film to a wire with a width comparable to a scale on the order of the inherent EPS, the system exhibits ultra-sharp jumps in resistivity, and such resistivity jumps are attributed to a reduction of the transport lanes to a single channel. As the insulating barriers of the charge-ordered state are broken by the reduction of temperature or an increase in magnetic field, the resistance in the wire shows sharp jumps around the metal–insulator (M–I) transition, which reflects the nature of the first-order phase transition between ferromagnetic metal and charge-ordered insulator domains [24]. Liu et al. [25] also prepared quasi-one-dimensional oxide nanoconstriction arrays via nanosphere lithography. They dropped a drop of aqueous suspension of SiO2 microspheres, with a diameter of 1.5 μm, onto a SrTO3 (100) substrate. These microspheres could self-assemble during the drying process and finally turned into a hexagon-like ordered monolayer. Then, a reactive ion etching process was proceeded to reduce the sizes of the microspheres. Subsequently, the substrate was put into a pulsed laser deposition (PLD) chamber for the deposition of La0.67Sr0.33MnO3; after that, the sample was transferred into a furnace and annealed at 750 °C. After removing the microspheres, a La0.67Sr0.33MnO3 nanoconstriction array was obtained. Under the low oxygen pressure, the La0.67Sr0.33MnO3 film was deposited with the oxygen deficiency in La0.67Sr0.33MnO3 nanoconstriction, the sample had to be further annealed at 900 °C for 8 h in air. Finally, the La0.67Sr0.33MnO3 size of nanoconstriction obtained was around 100 nm. Peña et al. [26] fabricated La2/3Sr1/3MnO3 microbridges by another method. They first deposited La2/3Sr1/3MnO3 films with a thickness range from 15 to 50 nm onto SrTiO3 substrates by RF sputtering. Then, the films were patterned into microbridges with different sizes by using standard photolithographic techniques.
Focused Ion Beam Milling
Recently, large aspect-ratio (length-to-width >300) single-crystal nanowires of La2/3Ca1/3MnO3 were also fabricated by combined optical and FIB lithographies, which preserved their functional properties [27]. Remarkably, an enhanced magnetoresistance value of 34 % in an applied magnetic field of 0.1 T in the narrowest 150-nm nanowire was obtained. Such behavior is ascribed to the strain release at the edges together with a destabilization of the insulating regions. This opens new strategies to implement these structures in functional spintronic devices. FIB is also used to fabricate manganite oxide nanobridges [28–31]. For example, Singh-Bhalla et al. [28, 29] fabricated (La0.5Pr0.5)0.67Ca0.33MnO3 nanobridges and microbridges with a width ranging from 100 nm to 1 μm. They first deposited single-crystalline, epitaxial 30-nm-thick (La0.5Pr0.5)0.67Ca0.33MnO3 films on the NdGaO3 (110) substrates at 820 °C by PLD. Then, a combination of photolithography and a FIB was employed to fabricate the (La0.5Pr0.5)0.67Ca0.33MnO3 nanobridges and microbridges. Pallecchi et al. [30] deposited La0.7Sr0.3MnO3 films on SrTiO3 (001) substrates by pulsed laser ablation and obtained La0.7Sr0.3MnO3 narrow channels with widths of 0.2–1.0 μm by a Ga+ FIB. Céspedes et al. [31] also patterned a manganite nanobridge by FIB. They grew La0.7Sr0.3MnO3 films by PLD. Then, a focused Ga+ beam was used to fabricate a La0.7Sr0.3MnO3 nanobridge with dimensions of less than 20 nm.
Electron Beam Lithography
Electron beam lithography (EBL) is a nanofabrication technique in rapid development [32]. Guo et al. [32] grew La0.67Ca0.33MnO3 films with thickness of ~100 nm on SrTiO3 (100) substrates by a PLD technique and fabricated La0.67Ca0.33MnO3 microbridges with different widths (e.g., 1.5 μm, 1 μm, and 500 nm) by EBL technology. Beekman et al. [33] also grew thinner La0.7Ca0.3MnO3 films (with a thickness range of 20–70 nm) on SrTiO3 (001) substrates by DC sputtering. And then, they fabricated a La0.7Ca0.3MnO3 microbridge with a width of 5 μm by using EBL technology and Ar etching.
Chemical Approaches
One-Dimensional Perovskite Manganite Oxide Nanostructures Synthesized by Hydrothermal Process
A hydrothermal method is a common method to fabricate manganite nanowires, which usually involves heating an aqueous suspension of precursor in a Teflon vessel at befitting temperatures and pressures. A mineralizer which is conducive to the crystallization is generally injected to control the morphology of products [34–37]. For example, Zhu et al. [34] used KMnO4, MnCl2·4H2O, La(NO3)3·6H2O, Ba(OH)2·8H2O, and Sr(NO3)2 as raw materials and KOH as a mineralizer to synthesize La0.5Ba0.5MnO3 nanowires. The reaction reagents were dissolved into deionized water to form a solution, to which KOH was added with stirring to adjust the alkalinity of the solution. The aqueous solution was reacted at 270 °C for 25 h to get La0.5Ba0.5MnO3; furthermore, another crystallization reaction occurred at 280 °C for 50 h to get La0.5Sr0.5MnO3 nanowires. The nanowire diameters were in the range of 30–150 nm for La0.5Ba0.5MnO3 and 50–400 nm for La0.5Sr0.5MnO3. By the same method, Datta et al. [35] also synthesized the single-crystalline La0.5Sr0.5MnO3 nanowires with a diameter of ~50 nm and a length up to 10.0 μm. It was found that these La0.5Sr0.5MnO3 nanowires had a ferromagnetic–paramagnetic transition temperature (Curie temperature, T C) at around 325 K, which was very close to the bulk value (~330 K) of the single crystal with the same composition. It was also found that the functional behavior was likely to be retained even after the diameter size of the nanowires was reduced to 45 nm. The electrical transport measurements on a single nanowire demonstrated that the nanowire exhibited an insulating behavior within the measured temperature range, which was similar to the bulk system. Single-crystalline La0.5Ca0.5MnO3 nanowires with lengths ranging from several to several tens of micrometers and a uniform diameter of ~80 nm were also grown by a hydrothermal method [36]. The La0.5Ca0.5MnO3 nanowires had an orthorhombic perovskite structure with very clean surfaces and grew along the (100) direction. An enhanced T C was observed in these nanowires, which was ascribed to the unit cell contraction and anisotropy. Rao et al. [37] also reported the hydrothermal synthesis of the charge-ordering Pr0.5Ca0.5MnO3 (PCMO) single-crystalline nanowires with a diameter of ~50 nm and a length of a few microns. They found that in these PCMO nanowires, the charge-ordered phase was weakened and the antiferromagnetic phase disappeared, whereas a ferromagnetic phase was observed in this one-dimensional manganite oxide nanowire.
One-Dimensional Perovskite Manganite Nanostructures Synthesized by Template Assistance
Template synthesis of manganite nanotubes and nanowires is a versatile and inexpensive technique, which combines a sol–gel process and the use of porous sacrificial substrates of either silicon or alumina as templates [38–45]. The size, shape, and structural properties of the assembly are simply controlled by the templates used, which form ordered arrayed nanowires and nanotubes. As a result, the diameter and length of the nanowires/nanotubes are corresponded closely to the pore. By this method, Li et al. [38] synthesized the LPCMO/MgO core–shell nanowires with diameters about tens of nanometers in two steps. First, chemical vapor deposition was used to grow MgO nanowires on the MgO (100) substrates coated with Au nanoparticles. Then, the LPCMO shell layers were deposited on the MgO nanowires by a PLD process. They finally obtained the LPCMO/MgO core–shell nanowires with diameters of 30 nm and lengths in a range of several micrometers to tens of micrometers. Similarly, Beltran-Huarac et al. [39] grew bamboo-like carbon nanotubes (BCNTs) and then deposited the La0.67Sr0.33MnO3 films onto the bamboo-like carbon nanotubes. Finally, they obtained one-dimensional La0.67Sr0.33MnO3/BCNTs with diameters ranging from 100 to 160 nm and lengths over 10 μm. Atalay et al. [40] used Ca(NO3)2·XH2O, La(NO3)3·6H2O, and Mn(NO3)2·XH2O as raw materials and ethylene glycol as a solvent. The solution with a pH value of 2–6 was stirred in high temperature until a gel was formed. Then, the gel was filled into a porous anodized aluminum oxide (AAO) template. Finally, the template was annealed at 400 °C for 2 h and at 700 °C for 2 h with a rate of 2 °C/min. After dissolution in 1 M NaOH, the nanowires with a diameter of 185–195 nm were obtained. Similarly, Ma et al. [41] also used an AAO template and a sol–gel process to fabricate La0.8Ca0.2MnO3 nanowires with a diameter of 30 nm. Carretero-Genevrier et al. [42] produced single-crystalline La0.7Sr0.3MnO3 nanowires by polymer template-directed chemical solution synthesis. In addition, perovskite rare-earth manganese tubes such as La0.67Sr0.33MnO3, La0.67Ca0.33MnO3, and La0.325Pr0.300Ca0.375MnO3 are also fabricated using a sol–gel template synthesis process [43, 44]. Their typical length was about 6 to 8 μm, and the average wall thickness is 45, 60, and 150 nm for La0.67Sr0.33MnO3, La0.67Ca0.33MnO3, and La0.325Pr0.300Ca0.375MnO3, respectively. The walls of the tubes were composed of magnetic nanograins, and their sizes are less than the critical size for multidomain formation in manganites. As a consequence, each particle that constituted the nanotube walls was a single magnetic domain. The La0.6Sr0.4CoO3 nanotubes with a diameter of 100 nm and the nanowires with a diameter of 40–60 nm were also formed by shaping the sol with the cylinder pores in an AAO template [45].
One-Dimensional Perovskite Manganite Nanostructures Produced from Electrospinning Process
Electrospinning is a time and cost-effective technique that produces ultra-fine fibers with diameters in the dozens-of-nanometers range through the action of an external electric field imposed on a precursor solution [46–48]. Hayat et al. [46] added barium acetate and manganese acetate tetrahydrate into acetic acid separately followed by stirring for 10–15 min, then poured the barium acetate and manganese acetate solution into the mixture of ethanol and polyvinyl pyrrolidone, and stirred them at room temperature for 16 h. The applied electric voltage between the needle tip and the collector was 10 kV. Finally, the collected nanofibers were heated at 600 °C for 2 h. Nanofibers with an average diameter of less than 100 nm were obtained. Jugdersuren et al. [47] dissolved La(NO3)3·6H2O, Mn(NO3)2·2H2O, and Sr(NO3)2 into water and added polyvinyl pyrrolidone (PVP) beads to bind the solution. Then, the electrospinning process proceed; after that, nanowires were collected and annealed at 550 °C for 3 h in argon and 3 % hydrogen gas mixture, additionally at 730 °C for 1 h in argon and 10 % oxygen atmosphere. Finally, they got La0.67Sr0.33MnO3 nanowires with diameters in a range of 80–300 nm and length in 200 μm. Zhou et al. [48] obtained thinner LaMnO3 nanofibers (50–100 nm) by a semblable way using lanthanum acetate and manganese acetate as raw materials and an applied electric voltage of 15 kV between the collector and the needle tip.
Structural Characterization of One-Dimensional Perovskite Manganite Nanostructures
Contemporarily, all kinds of techniques have been used to characterize the nanostructures of one-dimensional manganite, like X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and so on. Moreover, some techniques such as electron energy loss spectroscopy (EELS) and energy-dispersive X-ray spectrometer (EDX) can be utilized to analyze the chemical composition [20, 21].
Manganite Nanowires/Nanorods
Figure 1a shows the microstructural characterization of MgO nanowires and La0.33Pr0.34Ca0.33MnO3/MgO core–shell nanowires synthesized by a confinement growth method [38]. Figure 1a, c shows the SEM images of the MgO nanowires and the La0.33Pr0.34Ca0.33MnO3/MgO core–shell nanowires, respectively. From Fig. 1a, it can be seen that the top of the nanowires is capped by the Au nanoparticles. Figure 1b, d shows the TEM images of an individual MgO nanowire and the LPCMO/MgO nanowires, respectively. It can be inferred that the diameter of a single MgO nanowire is about 30 nm, and the thickness of LPCMO shell is about 10 nm. The SAED pattern and high-resolution TEM (HRTEM) image, as seen in Fig. 1e, f, reveal good epitaxial growth of the LPCMO shell on the MgO core. Wang et al. [49] synthesized BaMnO3 nanorods by the composite-hydroxide-mediated method, as shown in Fig. 2. Figure 2a–c demonstrates the BaMnO3 nanorods with a diameters of 20–50 nm and lengths of 150–250 nm, which belong to a hexagonal structure with lattice parameters of a = 5.699 Å and c = 4.817 Å, as proven by the XRD pattern (Fig. 2d). The structural and elemental characterizations were also performed on the single-crystalline La0.5Sr0.5MnO3 nanowires synthesized by a hydrothermal method [35]. The TEM image of a single nanowire is shown in Fig. 3a. The single-crystalline nature of the nanowires was confirmed from the diffraction pattern and HRTEM images, as shown in Fig. 3b, c, respectively. The lattice spacing was around 0.311 nm, and the (hkl) values were estimated from diffraction pattern data. The TEM-EDAX data also revealed that the atomic percentage ratio of (La+Sr):Mn:O was approximately 1:1:3, which was the desired composition. Therefore, the nanowires fabricated are pure phase and single crystalline in nature. The elemental analysis of the La0.5Sr0.5MnO3 nanowires was done by EELS on different single nanowires repeatedly, and the valency of Mn was estimated from the calibration curve shown in Fig. 4a. From the calibration curve, the valency of Mn in the La0.5Sr0.5MnO3 nanowires was estimated to be ~3.5, which was very close to its bulk value. Energy-filtered TEM (EFTEM) image was used to check the homogeneity of the elemental distribution within each nanowire. Figure 4b shows the EFTEM image of a La0.5Sr0.5MnO3 nanowire, where red, green, blue, and yellow colors are used for elements O, Mn, La, and Sr, respectively. The EFTEM analysis shows that all the constituent elements La, Sr, Mn, and O are homogeneously distributed within the La0.5Sr0.5MnO3 nanowire.
a SEM image of the MgO nanowires on the MgO substrate. The inset is the enlarged view. The light spots are Au nanoparticles. b TEM image of an individual MgO nanowire. The upper right and bottom left insets show the corresponding HRTEM image and SAED pattern, respectively. c SEM image of the LPCMO/MgO nanowires on the MgO substrate. The inset is the enlarged view. d TEM image of the LPCMO/MgO nanowires. e SAED pattern and f HRTEM image of an individual LPCMO/MgO nanowire (reproduced with permission of [38])
a SEM, b and c TEM images, and d XRD pattern of BaMnO3 nanorods. The insets in a and c are EDX and SAED patterns, respectively (reproduced with permission of [49])
a TEM image of a single nanowire, b selected area diffraction pattern of the nanowire, and c HRTEM image of the nanowire (reproduced with permission of [35])
a Intensity ratios of L3 and L2 lines of different Mn oxide compounds as a function of their known valency. b EFTEM image of a La0.5Sr0.5MnO3 nanowire (reproduced with permission of [35])
To obtain the structural information of the manganite nanowires from vibrational spectra, Raman scattering investigations were also performed. For example, Jugdersuren et al. [47] reported the Raman spectra of the La1 − x Sr x MnO3 (x = 0, 0.10, and 0.33) nanowires, as shown in Fig. 5. A broad peak appeared at 660 cm−1 in the Raman spectra of LaMnO3, which was identified as the B2g peak corresponding to the stretching and bending of the MnO6 octahedra. For the La0.9Sr0.1MnO3 and La0.67Sr0.33MnO3, the B2g peak shifted to around 670 cm−1 with decreasing intensity.
Raman spectra of the La1 − x Sr x MnO3 (x = 0, 0.10, and 0.33) nanowires (reproduced with permission of [47])
Manganite Nanotubes
Kumaresavanji et al. [50] synthesized highly ordered La0.7Ca0.3MnO3 nanotube arrays by a template-assisted sol–gel method. Figure 6 shows the top view and cross-sectional SEM micrographs of La0.7Ca0.3MnO3 nanotube arrays. The diameters of the nanotubes were around 190 ± 10 nm, and the average length of the nanotubes was about to 60 μm, corresponding to the pore diameters and thickness of the template. Manganite nanotubes can be prepared not only by AAO template assistance; plastic templates such as porous polycarbonate films are also widely used. Figure 7a, b shows the SEM micrographs of La0.325Pr0.300Ca0.375MnO3 nanotubes grown in the polycarbonate template with a pore size of 1 μm [51]. The nanotubes had an average diameter of 800 nm and a length of about 4 μm, about half of the template thickness. Figure 7b shows a cross-section view of a broken tube with 150-nm-thick walls. It can be distinguished that the walls are formed by nanoparticles with a size of about 50 nm. Similarly, Wang et al. [45] also reported the La0.6Sr0.4CoO3 nanotubes with a diameter of 100 nm and the nanowires with a diameter of 40–60 nm formed by shaping the sol into the cylinder pores in an AAO template. The difference between the diameters of the nanowires and the nanotubes may be due to their different shrinkage directions. For the nanowire, the shrinkage was towards the center of the cross section of the nanowires, whereas the shrinkage was towards the walls of the membrane pores in the case of nanotubes. The nanowires were tens of microns long, which were longer than the nanotubes.
a Top view and b cross-sectional SEM micrographs of La0.7Ca0.3MnO3 nanotube arrays (reproduced with permission of [50])
SEM micrograph of a La0.325Pr0.300Ca0.375MnO3 nanotubes and b a broken tube of La0.325Pr0.300Ca0.375MnO3 (reproduced with permission of [51])
Manganite Nanofibers/Nanobelts
The morphology of the as-grown La0.67Sr0.33MnO3 wires by the electrospinning process was examined by SEM, and the crystal structure was determined by XRD [47]. A typical SEM image of the as-grown La0.67Sr0.33MnO3 wires grown on a silicon substrate is shown in Fig. 8a. The inset of Fig. 8a shows the frequency distribution of the wire diameter. The diameter of the La0.67Sr0.33MnO3 wires was in a range of 80–300 nm and lengths up to 200 μm. Figure 8b demonstrates the XRD pattern of the La0.67Sr0.33MnO3 wires, indicating that all the XRD peaks can be indexed to an orthorhombic (Pnma) perovskite structure without any other secondary phases. The inset of Fig. 8b displays the peak splitting corresponding to the orthorhombic phase. Zhi et al. [52] synthesized the La0.8Sr0.2MnO3 nanofibers by an electrospinning process. As seen in Fig. 9, the lengths of nanofibers are up to tens of micrometers and 150–225 nm in diameter. Their XRD peaks are indexed with the La0.8Sr0.2MnO3 rhombohedral structure.
a SEM images of La0.67Sr0.33MnO3 wires. The inset shows the frequency distribution of the wire diameter. b XRD pattern of as-grown La0.67Sr0.33MnO3 wires (reproduced with permission of [47])
a SEM images and b XRD pattern of La0.8Sr0.2MnO3 nanofibers. The inset in a is the enlarged view (reproduced with permission of [52])
Manganite Nanobridges and Microbridges
Nanobridge structures have attracted much interest due to their special structures and physical properties. Figure 10a shows the topographic image of La2/3Sr1/3MnO3 microbridges (with a height of ~45 nm) synthesized by photolithographic techniques [26], and Fig. 10b shows the relief profile of the microbridges measured along the green line shown in Fig. 10a. The image indicates that the engraving process employed in the experiment reaches the STO substrate surface; in other words, the bridges are electrically and positionally isolated from each other. Figure 11 shows a unique La0.7Sr0.3MnO3 nanobridge with single and multiple nanoconstrictions synthesized by FIB [31]. Figure 11a shows the schematic of the FIB milling of a double nanoconstriction departing from a 5.0-μm track on 50–150-nm films. Figure 11b shows the SEM image of a triple nanoconstriction with a width of 20–50 nm. A domain wall is supposed to form at the nanoconstriction. Recently, La0.67Ca0.33MnO3 microbridges with different widths are also fabricated from the well epitaxial La0.67Ca0.33MnO3 films by EBL technology [32]. An anomalous positive magnetoresistance effect was observed in these La0.67Ca0.33MnO3 microbridges. The underlying mechanism for this phenomenon is the confined geometry, which is dominated by the filamentary conduction mechanism. The magnetoresistance of the microbridges also shows an interesting behavior for the enhanced e–e interactions in the presence of spin disorder. It can be decreased and can even change its sign in the bridges with widths of 1.5 and 1.0 μm under magnetic field of 1 T. Figure 12a shows an electron microscopy picture of a typical La0.7Ca0.3MnO3 microbridge patterned by EBL [33]. The bridge has a four-point configuration with a width of 5 μm and 20–30 μm between the voltage contacts. The temperature dependence of resistance of a bridge measured on a flat STO at two different current densities is shown in Fig. 12b (squares for J = 2 × 106 A/m2, triangles for J = 4 × 107 A/m2), and both curves show a clear M–I transition temperature at T MI = 130 K.
a Topographic image of a lithographed La2/3Sr1/3MnO3 thin film and its b relief profile (reproduced with permission of [26])
a Schematic of the fabrication process. b SEM of an La0.7Sr0.3MnO3 triple nanoconstriction (reproduced with permission of [31])
a An electron microscopy picture of a typical microbridge. b R(T) at two different current densities (reproduced with permission of [33])
Fundamental Transport Properties of One-Dimensional Perovskite Manganite Oxide Nanostructures
One-dimensional perovskite manganite nanostructures are attractive for their size and dimensionality dependence of physical properties such as electrical and magnetic performances. These properties make it widely used for applications in microelectronic, magnetic, and spintronic devices. In this section, we introduce the electrical and magnetic transport properties of one-dimensional perovskite manganite nanostructures [20, 21].
Electrical Transport Properties
The temperature variation of resistivity is an important measurement item for the study of electrical transport properties of one-dimensional perovskite manganite nanostructures [35–37]. Figure 13 [35] shows (a) the temperature dependence of resistance for one La0.5Sr0.5MnO3 single nanowire and (b) the quantitative comparison of resistivity of La0.5Sr0.5MnO3 nanowire and bulk prepared by a ceramic method. The inset in the bottom left corner of Fig. 13a shows the SEM image of the four-wire electrical contact made of Pt patterned on a single 45-nm La0.5Sr0.5MnO3 nanowire. From Fig. 13, we can see the insulating behavior of La0.5Sr0.5MnO3 nanowire. The resistivity of La0.5Sr0.5MnO3 bulk is quite higher than that of La0.5Sr0.5MnO3 nanowire. Li et al. [53] compared electrical properties of the simultaneously grown La0.67Sr0.3MnO3/MgO core–shell nanorod arrays and La0.67Sr0.3MnO3 thin films. Figure 14 shows the temperature dependence of resistance for the La0.67Sr0.3MnO3 thin films and La0.67Sr0.3MnO3/MgO nanorod arrays. The resistance of nanorod arrays is about 3 orders higher than that of thin films, due to the enhanced scattering at the grain boundaries. Moreover, a valley is appeared in the curve of nanorod arrays, which is ascribed to a Kondo-type scattering from blocked Mn spins at the grain boundaries. Zhang et al. [36] synthesized La0.5Ca0.5MnO3 (~80 nm) nanowires by a hydrothermal method and studied the transport properties of the nanowires. Figure 15 shows the temperature dependence of resistivity measured under magnetic fields of 0 and 14 T, respectively, and the magnetoresistance (MR) under a magnetic field of 14 T. The MR ratio is defined as MR = [R(0) − R(H)] / R(0), where R(0) and R(H) are the resistance in the absence and presence of an external field, respectively. There is no M–I transition observed under two magnetic fields; also, the MR ratio increases with the decreasing temperature. These results are ascribed to the grain boundaries, near which strong spin-dependent scattering of carriers exists, leading to a manganite state, and the line shapes of electron magnetic resonance (EMR) signals change. That is ascribed to the appearance of exchange and anisotropy fields in the ferromagnetic state [54]. Figure 16 shows the TEM images, EMR signals, and dM/dT versus T of Pr0.5Ca0.5MnO3 nanowires with diameters of ~50 nm synthesized by a hydrothermal method [37]. It can be seen from Fig. 16b that symmetric Lorentzian signals become broad and asymmetric below about 130 K, which coheres with the T C ~105 K obtained from Fig. 16c.
a Temperature-dependent resistivity of one single La0.5Sr0.5MnO3 nanowire, measured in the temperature range from 5 to 310 K. The inset is the SEM image of the four-wire electrical contact made of Pt patterned on a single 45-nm La0.5Sr0.5MnO3 nanowire. b Quantitative comparison of resistivity of La0.5Sr0.5MnO3 nanowires and bulk (reproduced with permission of [35])
Temperature-dependent resistance for the a La0.67Sr0.33MnO3 thin films and the b La0.67Sr0.33MnO3/MgO nanorod arrays, respectively, at various magnetic fields (reproduced with permission of [53])
The temperature dependence of resistivity measured under magnetic fields of 0 and 14 T, respectively, and the MR under a field of 14 T (reproduced with permission of [36])
a TEM images, b EMR signals, and c dM/dT versus T of Pr0.5Ca0.5MnO3 nanowires (reproduced with permission of [37])
Pallecchi et al. [30] fabricated three kinds of La0.7Sr0.3MnO3 micro/nanobridges (with different widths) by different pattern technologies. Sample A is patterned by optical lithography and wet etching in HCl with a width of ~15 μm, sample B is patterned by AFM local anodization with a width of ~5 μm, and sample C is patterned by FIB milling with a width of ~0.5 μm. Their temperature dependences of resistance of three samples mentioned above are shown in Fig. 17. Sample B has the largest M–I transition temperature (T MI, above 310 K), which indicates that sample B has better structural quality and optimal oxygen stoichiometry [30]. In the La0.67Ca0.33MnO3 microbridges with different widths fabricated by EBL technology, their magnetoresistance shows an interesting behavior due to the enhanced e–e interactions in the presence of spin disorder. It can be decreased and even changed its sign in the widths of 1.5- and 1.0-μm bridges under the magnetic field of 1 T, whereas under high magnetic fields of 4 and 7 T, the e–e interactions are weakened by other interactions, and the positive magnetoresistance is masked by the negative magnetoresistance [32].
The temperature dependence of resistance of samples A, B, and C (reproduced with permission of [30])
Magnetic Transport Properties
Kumaresavanji et al. [50] reported the magnetic properties of La0.7Ca0.3MnO3 nanotube arrays and its counterpart. Figure 18 shows temperature-dependent magnetization of La0.7Ca0.3MnO3 nanotube arrays and its bulk counterpart. The Curie temperature (T C) is over a broad temperature at 236 K for nanotube arrays and sharp at 258 K for a bulk sample. A furcation between field-cooled (FC) and zero-field-cooled (ZFC) curves is observed below the T C. Wang and Fan [55] measured the different magnetic properties of the Ca0.82La0.18MnO3 nanowires, nanoparticles, and bulk, as shown in Fig. 19. Figure 19a shows the FC and ZFC temperature-dependent magnetization for the samples. The charge-ordered (CO) temperature (T CO) is 132 K for bulk and ~124 K for nanowires. But the nanoparticles exhibit a ferromagnetism (T C ~165 K), in which the CO disappears. Figure 19b shows the M–H curves measured at 5 K, indicating an FM behavior in the nanoparticles and an AFM behavior in the bulk. The nanowires exhibit an AFM state with slight ferromagnetism. Li et al. [38] also reported the magnetic transport properties of the single-crystalline LPCMO nanowires with diameters about tens of nanometers, as shown in Fig. 20. In Fig. 20a, the ZFC curve and the FC curve of the LPCMO nanowires are split at a blocking temperature of T b = 93 K when the temperature is decreased. Such a ZFC/FC deviation is very similar to that of the bulk polycrystalline LPCMO sample also shown in Fig. 20a and is due to the frozen of the magnetic moment. The differences between the ZFC and FC magnetic moments in the nanowire, defined as the frozen phase magnetic moment, is significantly larger than that in the bulk counterpart below the blocking temperature sample, as shown in Fig. 20b. In bulk or thin-film LPCMO, the frozen phase is generally regarded to be related to the phase competition between the FM metallic phase and the AFM–CO phase [56]. So, in the nanowires, the increased amount of frozen phase concentration implies the stronger phase competition in the low-dimensional system. Figure 20c, d displays the magnetic field dependence of the magnetic moments of the LPCMO nanowires and the bulk counterpart. As observed in Fig. 20c, both the saturation magnetic moment (m s) and the coercivity (H c) in the LPCMO nanowires were increased as the temperature was decreased, which was similar to that in bulk or thin-film manganites. However, the differences between the nanowire and the bulk sample were also observed. The H c value of the LPCMO nanowires was much larger than that of the LPCMO bulk sample. For example, at T = 10 K, H c is about 550 Oe in the nanowire but only about 100 Oe in the bulk sample as shown in Fig. 20d. The larger H c in the nanowires could be attributed to their stronger domain wall pinning at the boundaries of the separated AFM and FM phases caused by the EPS in the nanowires [57]. The above observations suggest that the EPS with a stronger phase competition exists in the one-dimensional structures.
Temperature-dependent magnetization at 100 Oe for a La0.7Ca0.3MnO3 nanotube arrays and b its bulk counterpart (reproduced with permission of [50])
a FC (closed symbols) and ZFC (open symbols) magnetizations for the samples under a field of 1000 Oe. The arrows indicate T CO (for the bulk and nanowires) or T C (for the nanoparticles). b M–H curves for the samples at 5 K (reproduced with permission of [55])
a Magnetic moment versus temperature of the LPCMO/MgO nanowires (NW) and the LPCMO bulk polycrystalline sample after ZFC and FC. The cooling field and the measuring field are both 200 Oe. b The percentage of the frozen phase defined as [m(FC) − m(ZFC)] / m(FC), c the field-dependent magnetic moment of the LPCMO/MgO nanowires at different temperatures, and d the hysteresis loops of the nanowires and the bulk sample measured at T = 10 K (reproduced with permission of [38])
Applications of One-Dimensional Perovskite Manganite Nanostructures
Information Storages
One-dimensional manganite oxide has an attractive commercial value for the adhibition in information storages. Among sundry manganites, perovskite manganite is of particular importance due to its colossal magnetoresistance (CMR) [26]. Peña et al. [26] investigated the electronic transport properties of La2/3Sr1/3MnO3 microfabricated bridges. The local I–V curves are nearly symmetric in the ON state (prior to the transition between low resistance and high resistance states) but present a rectifying performance in the OFF state (high resistance state, HRS). A metal–insulator–metal (M–I–M) geometry with an interface-switching mechanism is introduced: the topmost unit cells of the La2/3Sr1/3MnO3 are the I layer and the remaining La2/3Sr1/3MnO3 layer and scanning probe microscope (SPM) conducting tip which act as the M layer. This geometry allows the research of the electronic properties of the HRS and their dependence on temperature and magnetic field for the first time. The results indicate that the electronic effects are the biggest contributor in the charge depletion, even though mobile ions or ionic defects might affect the current transport. These results represent an important step forward to the oxide-based memory devices.
Field-Effect Transistors
Field-effect transistor is the simplest form of transistor, which is widely used in large-scale integration. It controls the conductive ability of solid materials by electric field effect. Zhao et al. [58] fabricated an all-perovskite ferroelectric field-effect transistor (FeFET) structure with a Pb(Zr0.2Ti0.8)O3 gate and a CMR La0.8Ca0.2MnO3 channel on Si, as seen in Fig. 21. A maximum modulation of 20 % after an electric field poling of 1.5 × 105 V/cm and 50 % under a magnetic field of 1 T was observed near the M–I transition temperature of the La0.8Ca0.2MnO3 channel. The results demonstrate the feasibility of integrating the CMR-based FeFET on Si.
Schematic structure of the FeFET (reproduced with permission of [58])
Spintronic Devices
In the one-dimensional perovskite manganite oxide nanostructures, their magnetic, electronic, and lattice degrees of freedom interact with each other through double exchange and Jahn–Teller interaction, leading to delicate unbalances between the magnetic, electronic, and lattice degrees of freedom in these materials at the nanoscale, and thus, new outstanding properties can be achieved [59]. Therefore, one-dimensional perovskite manganite nanostructures are viewed as functional building blocks for the transport of charge and spins for the assembly of electronic, magnetic, and sensing devices [60, 61]. By using manganite oxide nanowires as building blocks, one can create manganite oxide nanowire-based lateral spin valves or magnetic tunneling junction (MTJ) devices. A possible scheme starts with a bottom-up synthesized FM manganite oxide nanowire, and a small portion of which is be converted into nonmagnetic (NM) by using selective Ar+ ion milling, leading to an FM–NM–FM lateral device. Such a manganite oxide nanowire-based spintronic device is attractive, whereas the centrally modified region must be thin enough to retain the spin coherent transport. The enhanced low-field MR [47, 62] and the Curie temperature [63] and significant magnetic anisotropy [42] have also been observed in the perovskite manganite oxide nanowires. In addition, the morphology of manganite oxide nanowire can be also controlled by annealing or growing on engineered substrates, which could significantly affect their physical properties [60, 64]. Therefore, such large MR and the great tunability of one-dimensional perovskite manganite nanostructures are much attractive for spintronic applications. By using La0.67Sr0.33MO and SrTiO3 as FM and insulating layer, respectively, all-oxide MTJ devices were first fabricated by Lu et al. [65] and Sun et al. [66]. Furthermore, a record tunneling magnetoresistance ratio of 1850 % was also reported by Bowen et al. [67]. Despite these promising results have been made, the working temperature of all the perovskite oxide-based MTJ devices remains lower than the room temperature, which is the major issue to be resolved before commercial applications of all perovskite oxide-based MTJ devices.
Conclusions
In summary, this article provides a comprehensive review on recent developments in synthesis, characterization, transport properties, and applications of one-dimensional manganite oxide nanostructures (including nanorods, nanowires, nanotubes, and nanofibers). Nowadays, one-dimensional manganite oxide nanostructures are widely used for applications in nanostructure-based devices because of their fascinating electrical and magnetic transport properties. Although many exciting progresses and potential applications of one-dimensional manganite oxide nanostructures have been made, considerable challenges remain to be resolved. In terms of the fabrication techniques, the top-down (physical approach) fabrication technique often requires expensive equipment and complicated processing and also usually faces the challenge of structural defects (such as edge roughness) in the lithographically patterned one-dimensional manganite oxide nanostructures. In addition, most of the perovskite manganite oxide materials need high deposition temperature and the typical electron beam and photo resists are incompatible with this requirement. The bottom-up (chemical approach) synthesis of one-dimensional manganite oxide nanostructures with precise and reproducible controls in composition, morphology, and physical properties is challenging for one-dimensional manganite oxide nanostructures used for spintronic devices. In terms of microelectronic devices, there have been some revolutionary breakthroughs in spintronics, such as spin valves, magnetic tunneling junctions, and spin field-effect transistors. However, several problems for one-dimensional manganite oxide nanostructures used for spintronic devices remain unresolved and some technical challenges lie ahead. For example, the spin polarization of manganite oxides decays rapidly with temperature, and the working temperature of the one-dimensional manganite oxide nanostructure-based spintronic device is often lower than the room temperature. The low-dimensional spin-dependent transport exists in the one-dimensional manganite oxide nanostructures, and the physical properties of the interfaces within one-dimensional manganite oxide nanostructure-based devices remain elusive. Furthermore, the defect chemistries and the stoichiometry-property correlations in the one-dimensional perovskite manganite oxide nanostructures are quite complex. In addition, new device processing techniques are also urgent to be developed. With the researches into one-dimensional manganite oxide nanostructures spreading their wings and becoming more extensive, it is expected that the fascinating achievements towards the practical applications of one-dimensional manganite oxide nanostructures in the fields of microelectronics, magnetics, and spintronics will be made. An exciting new era for the applications of one-dimensional manganite oxide nanostructures in oxide microelectronics is on the horizon!
References
Wang ZL (2000) Characterizing the structure and properties of individual wire-like nanoentities. Adv Mater 12:1295
Duan X, Huang Y, Cui Y, Wang J, Lieber CM (2001) Indium phosphide nanowires as building blocks for nanoscale electronic and optoelectronic devices. Nature 409:66
Cui Y, Lieber CM (2001) Functional nanoscale electronic devices assembled using silicon nanowire building blocks. Science 291:851
Huang Y, Duan X, Cui Y, Lauhon LJ, Kim KH, Lieber CM (2001) Logic gates and computation from assembled nanowire building blocks. Science 294:1313
Xia Y, Yang P, Sun Y, Wu Y, Mayers B, Gates B, Yin Y, Kim F, Yan H (2003) One-dimensional nanostructures: synthesis, characterization, and applications. Adv Mater 15:353
Hu J, Odom TW, Liber CM (1999) Chemistry and physics in one dimension: synthesis and properties of nanowires and nanotubes. Acc Chem Res 32:435
Mieszawska AJ, Jalilian R, Sumanasekera GU, Zamborini FP (2007) The synthesis and fabrication of one-dimensional nanoscale heterojunctions. Small 3:722
Polyakov B, Daly B, Prikulis J, Lisauskas V, Vengalis B, Morris MA, Holmes JD, Erts D (2006) High-density arrays of germanium nanowire photoresistors. Adv Mater 18:1812
Cerrina F, Marrian C (1996) A path to nanolithography. MRS Bulletin 21:56
Gibson JM (1997) Reading and writing with electron beams. Phys Today 50:56
Matsui S, Ochiai Y (1996) Focused ion beam applications to solid state devices. Nanotechnology 7:247
Li RW (2009) AFM lithography and fabrication of multifunctional nanostructures with perovskite oxides. Int J Nanotechnol 6:1067
Dagata JA (1995) Device fabrication by scanned probe oxidation. Science 270:1625
Levenson MD (1995) Welcome to the DUV revolution. Solid State Technol 38:81
Xia Y, Aogers J, Paul KE, Whitesides GM (1999) Unconventional methods for fabricating and patterning nanostructures. Chem Rev 99:1823
Shankar KS, Raychaudhuri AK (2005) Fabrication of nanowires of multicomponent oxides: review of recent advances. Mater Sci Eng C 25:738
Obradors X, Puig T, Gibert M, Queraltó A, Zabaleta J, Mestres N (2014) Chemical solution route to self-assembled epitaxial oxide nanostructures. Chem Soc Rev 43:2200
Einarsrud MA, Grande T (2014) 1D oxide nanostructures from chemical solutions. Chem Soc Rev 43:2187
Rørvik PM, Grande T, Einarsrud MA (2011) One-dimensional nanostructures of ferroelectric perovskites. Adv Mater 23:4007
Zhu XH, Liu ZG, Ming NB (2010) Perovskite oxide nanotubes: synthesis, structural characterization, properties and applications. J Mater Chem 20:4015
Zhu XH, Liu ZG, Ming NB (2010) Perovskite oxide nanowires: synthesis, property and structural characterization. J Nanosci Nanotechnol 10:4109
Handoko AD, Goh GKL (2010) One-dimensional perovskite nanostructures. Sci Adv Mater 2:16
Liang LZ, Li L, Wu H, Zhu XH (2014) Research progress on electronic phase separation in low-dimensional perovskite manganite nanostructures. Nanoscale Res Lett 9:325
Zhai HY, Ma JX, Gillaspie DT, Zhang XG, Ward TZ, Plummer EW, Shen J (2006) Giant discrete steps in metal-insulator transition in perovskite manganite wires. Phys Rev Lett 97:167201
Liu HJ, Sow CH, Ong CK (2006) Fabrication of quasi-one-dimensional oxide nanoconstriction array via nanosphere lithography: a simple approach to nanopatterns of multicomponent oxides. J Appl Phys 100:014306
Peña L, Garzón L, Galceran R, Pomar A, Bozzo B, Konstantinovic Z, Sandiumenge F, Balcells L, Ocal C, Martinez B (2014) Macroscopic evidence of nanoscale resistive switching in La2/3Sr1/3MnO3 micro-fabricated bridges. J Phys Condens Matter 26:395010
Marín L, Morellón L, Algarabel PA, Rodríguez LA, Magén C, De Teresa JM, Ibarra MR (2014) Enhanced magnetotransport in nanopatterned manganite nanowires. Nano Lett 14:423
Singh-Bhalla G, Biswas A, Hebard AF (2009) Tunneling magnetoresistance in phase-separated manganite nanobridges. Phys Rev B 80:144410
Singh-Bhalla G, Selcuk S, Dhakal T, Biswas A, Hebard AF (2009) Intrinsic tunneling in phase separated manganites. Phys Rev Lett 102:077205
Pallecchi I, Gadaleta A, Pellegrino L, Gazzadi GC, Bellingeri E, Siri AS, Marré D (2007) Probing of micromagnetic configuration in manganite channels by transport measurements. Phys Rev B 76:174401
Céspedes O, Watts SM, Coey JMD, Dörr K, Ziese M (2005) Magnetoresistance and electrical hysteresis in stable half-metallic La0.7Sr0.3MnO3 and Fe3O4 nanoconstrictions. Appl Phys Lett 87:083102
Guo X, Li PG, Wang X, Fu XL, Chen LM, Lei M, Zheng W, Tang WH (2009) Anomalous positive magnetoresistance effect in La0.67Ca0.33MnO3 microbridges. J Alloy Compd 485:802
Beekman C, Zaanen J, Aarts J (2011) Nonlinear mesoscopic transport in a strongly cooperative electron system: the La0.67Ca0.33MnO3 microbridge. Phys Rev B 83:235128
Zhu D, Zhu H, Zhang Y (2003) Microstructure and magnetization of single-crystal perovskite manganites nanowires prepared by hydrothermal method. J Cryst Growth 249:172
Datta S, Chandra S, Samanta S, Das K, Srikanth H, Ghosh B (2013) Growth and physical property study of single nanowire (diameter similar to 45 nm) of half doped manganite. J Nanomater 2013:162315
Zhang T, Jin CG, Qian T, Lu XL, Bai JM, Li XG (2004) Hydrothermal synthesis of single-crystalline La0.5Ca0.5MnO3 nanowires at low temperature. J Mater Chem 14:2787
Rao SS, Anuradha KN, Sarangi S, Bhat SV (2005) Weakening of charge order and antiferromagnetic to ferromagnetic switch over in Pr0.5Ca0.5MnO3 nanowires. Appl Phys Lett 87:182503
Li L, Li H, Zhai X, Zeng C (2013) Fabrication and magnetic properties of single-crystalline La0.33Pr0.34Ca0.33MnO3/MgO nanowires. Appl Phys Lett 103:113101
Beltran-Huarac J, Carpena-Nunez J, Barrionuevo D, Mendoza F, Katiyar RS, Fonseca LF, Weiner BR, Morell G (2013) Synthesis and transport properties of La0.67Sr0.33MnO3 conformally-coated on carbon nanotubes. Carbon 65:252
Atalay FE, Yagmur V, Atalay S, Kaya H, Tari S, Avsar D (2010) The synthesis of ferromagnetic La0.75Ca0.25MnO3 nanowires by a sol-gel method. J Optoelectron Adv M 12:392
Ma X, Zhang H, Xu J, Niu J, Yang Q, Sha J, Yang D (2002) Synthesis of La1−xCaxMnO3 nanowires by a sol–gel process. Chem Phys Lett 363:579
Carretero-Genevrier A, Mestres N, Puig T, Hassini A, Oró J, Pomar A, Sandiumenge F, Obradors X, Ferain E (2008) Single-crystalline La0.7Sr0.3MnO3 nanowires by polymer-template-directed chemical solution synthesis. Adv Mater 20:3672
Curiale J, Sánchez RD, Troiani HE, Ramos CA, Pastoriza H, Leyva AG, Levy P (2007) Magnetism of manganite nanotubes constituted by assembled nanoparticles. Phys Rev B 75:224410
Levy P, Leyva AG, Troiani H, Sánchez RD (2003) Nanotubes of rare-earth manganese oxide. Appl Phys Lett 83:5247
Wang J, Manivannan A, Wu N (2008) Sol–gel derived La0.6Sr0.4CoO3 nanoparticles, nanotubes, nanowires and thin films. Thin Solid Films 517:582
Hayat K, Iqbal MJ, Rasool K, Iqbal Y (2014) Device fabrication and dc electrical transport properties of barium manganite nanofibers (BMO-NFs). Chem Phys Lett 616–617:126
Jugdersuren B, Kang S, DiPietro RS, Heiman D, McKeown D, Pegg IL, Philip J (2011) Large low field magnetoresistance in La0.67Sr0.33MnO3 nanowire devices. J Appl Phys 109:016109
Zhou X, Zhao Y, Cao X, Xue Y, Xu D, Jiang L, Su W (2008) Fabrication of polycrystalline lanthanum manganite (LaMnO3) nanofibers by electrospinning. Mater Lett 62:470
Wang N, Hu CG, Xia CH, Feng B, Zhang ZW, Xi Y (2007) Ultrasensitive gas sensitivity property of BaMnO3 nanorods. Appl Phys Lett 90:163111
Kumaresavanji M, Sousa CT, Pires A, Pereira AM, Lopes AML, Araujo JP (2015) Magnetocaloric effect in La0.7Ca0.3MnO3 nanotube arrays with broad working temperature span. J Appl Phys 117:104304
Leyva AG, Stoliar P, Rosenbusch M, Lorenzo V, Levy P, Albonetti C, Cavallini M, Biscarini F, Troiani HE, Curiale J, Sánchez RD (2004) Microwave assisted synthesis of manganese mixed oxide nanostructures using plastic templates. J Solid State Chem 177:3949
Zhi M, Koneru A, Yang F, Manivannan A, Li J, Wu N (2012) Electrospun La0.8Sr0.2MnO3 nanofibers for a high-temperature electrochemical carbon monoxide sensor. Nanotechnology 23:305501
Li L, Zhang X, Li L, Zhai X, Zeng C (2013) Magnetoresistance of single-crystalline La0.67Sr0.33MnO3/MgO nanorod arrays. Solid State Commun 171:46
Joshi JP, Sood AK, Bhat SV, Parashar S, Raju AR, Rao CNR (2004) An electron paramagnetic resonance study of phase segregation in Nd0.5Sr0.5MnO3. J Magn Magn Mater 279:91
Wang Y, Fan HJ (2011) The origin of different magnetic properties in nanosized Ca0.82La0.18MnO3: wires versus particles. Appl Phys Lett 98:142502
Ghivelder L, Parisi F (2005) Dynamic phase separation in La5/8−yPryCa3/8MnO3. Phys Rev B 71:184425
Niebieskikwiat D, Sanchez RD (2012) Pinning of elastic ferromagnetic/antiferromagnetic interfaces in phase-separated manganites. J Phys Condens Matter 24:436001
Zhao T, Ogale SB, Shinde SR, Ramesh R, Droopad R, Yu J, Eisenbeiser K, Misewich J (2004) Colossal magnetoresistive manganite-based ferroelectric field-effect transistor on Si. Appl Phys Lett 84:750
Dong S, Gao F, Wang ZQ, Liu JM, Ren ZF (2007) Surface phase separation in nanosized charge-ordered manganites. Appl Phys Lett 90:082508
Wei J, Natelson D (2011) Nanostructure studies of strongly correlated materials. Nanoscale 3:3509
Tian YF, Bakaul SR, Wu T (2012) Oxide nanowires for spintronics: materials and devices. Nanoscale 4:1529
Zhang Z, Ranjith R, Xie BT, You L, Wong LM, Wang SJ, Wang JL, Prellier W, Zhao YG, Wu T (2010) Enhanced low field magnetoresistance in nanocrystalline La0.7Sr0.3MnO3 synthesized on MgO nanowires. Appl Phys Lett 96:222501
Shankar KS, Kar S, Raychaudhuiri AK, Subbanna GN (2004) Fabrication of ordered array of nanowires of La0.67Ca0.33MnO3 (x=0.33) in alumina templates with enhanced ferromagnetic transition temperature. Appl Phys Lett 84:993
Mathews M, Jansen R, Rijnders G, Lodder JC, Blank DHA (2009) Magnetic oxide nanowires with strain-controlled uniaxial magnetic anisotropy direction. Phys Rev B 80:064408
Lu Y, Li W, Gong G, Xiao G, Gupta A, Lecoeur P, Sun J, Wang Y, Dravid V (1996) Large magnetotunneling effect at low magnetic fields in micrometer-scale epitaxial La0.67Sr0.33MnO3 tunnel junctions. Phys Rev B 54:R8357
Sun JZ, Gallagher WJ, Ducombe PR, Krusin-Elbaum L, Atman RA, Gupta A, Lu Y, Gong GQ, Xiao G (1996) Observation of large low-field magnetoresistance in trilayer perpendicular transport devices made using doped manganate perovskites. Appl Phys Lett 69:3266
Bowen M, Bibes M, Barthelemy A, Contour JP, Anane A, Lemaitre Y, Fert A (2003) Nearly total spin polarization in La2/3Sr1/3MnO3 from tunneling experiments. Appl Phys Lett 82:233
Acknowledgements
This work was partially supported by the National Natural Science Foundation of China (grant nos. 11174122 and 11134004); National Basic Research Program of China (grant nos. 2015CB654900); open projects from State Key Laboratory of Materials-Oriented Chemical Engineering (MCE), Nanjing University of Technology (grant no. KL14-10); National Laboratory of Solid State Microstructures, Nanjing University (grant no. M26012); and six big talent peak project from Jiangsu Province (grant no. XCL-004).
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing Interests
The authors declare that they have no competing interests.
Authors’ Contributions
LL and XZ designed the structure and modified the manuscript articles. LL drafted the manuscript. HW participated in the sequence alignment. All authors read and approved the final manuscript.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Li, L., Liang, L., Wu, H. et al. One-Dimensional Perovskite Manganite Oxide Nanostructures: Recent Developments in Synthesis, Characterization, Transport Properties, and Applications. Nanoscale Res Lett 11, 121 (2016). https://doi.org/10.1186/s11671-016-1320-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s11671-016-1320-1