Abstract
The present work investigates the dynamic torsional vibrations in a single-walled carbon nanotube embedded in a viscoelastic medium under the linear and harmonic external torques. In order to derive the equation of motion and associated clamped–clamped and clamped–torsional spring boundary conditions, Hamilton’s principle is utilized. Eringen’s nonlocal elasticity theory is the selected theory to show the small-scale effect. The assumed modes method and a Galerkin method are applied to analyze the derived equation analytically as the exact solutions. Then, the Rayleigh–Ritz method is proposed to compare the obtained results. In free vibration analysis, the nonlocal parameter has an effect on both natural frequencies and energy dissipation in different modes. It should be emphasized that the forced analysis of torsional vibration in the viscoelastic nanoscale is novel. The variation of the nonlocal parameter, thickness of carbon nanotube, damping coefficient, stiffness of the boundary spring, as well as the influence of excitation frequency on the angular displacement in the time domain, are illustrated in this paper. The results desirably are consistent with those from other studies.
Similar content being viewed by others
References
R.P. Feynman, There’s plenty of room at the bottom: an invitation to enter a new field of physics, in Handbook of Nanoscience, Engineering, and Technology, Third Edition (CRC Press, 2012), pp. 26–35
M. Namvar et al., Experimental and analytical investigations of vibrational behavior of U-shaped atomic force microscope probe considering thermal loading and the modified couple stress theory. Eur. Phys. J. Plus 132(6), 247 (2017)
O. Rahmani et al., Free vibration of deep curved FG nano-beam based on modified couple stress theory. Steel Compos. Struct. 26(5), 607–620 (2018)
O. Rahmani et al., Dynamic response of a double, single-walled carbon nanotube under a moving nanoparticle based on modified nonlocal elasticity theory considering surface effects. Mech. Adv. Mater. Struct. 24(15), 1274–1291 (2017)
R. Sourki, S. Hosseini, Coupling effects of nonlocal and modified couple stress theories incorporating surface energy on analytical transverse vibration of a weakened nanobeam. Eur. Phys. J. Plus 132(4), 184 (2017)
B.A. Hamidi et al., An exact solution on gold microbeam with thermoelastic damping via generalized Green-Naghdi and modified couple stress theories. J. Thermal Stresses 43, 1–18 (2019)
S.A. Hosseini, F. Khosravi, M. Ghadiri, Moving axial load on dynamic response of single-walled carbon nanotubes using classical, Rayleigh and Bishop rod models based on Eringen’s theory. J. Vib. Control (2019). https://doi.org/10.1177/1077546319890170
F.C. Adams, C. Barbante, Nanoscience, nanotechnology and spectrometry. Spectrochim. Acta Part B 86, 3–13 (2013)
M. Meyyappan, Nanotechnology in aerospace applications (MM Associates, Moffett Field, CA, 2007)
B. Paton, A.Y. Ishchenko, A. Ustinov, Application of nanotechnology of permanent joining of advanced light-weight metallic materials for aerospace engineering. Paton Weld. J. 12, 2–8 (2008)
M. Regi, 6—Synthesis, characterization and application of carbon nanotubes: the case of aerospace engineering, in Nanofibers and Nanotechnology in Textiles, ed. by P.J. Brown, K. Stevens (Woodhead Publishing, Sawston, 2007), pp. 113–193
V.K. Ganesh, Nanotechnology in civil engineering. Eur. Sci. J. ESJ 8(27), 96–109 (2012)
K. Gopalakrishnan et al., Nanotechnology in civil infrastructure: a paradigm shift (Springer, Berlin, 2011)
W. Zheng et al., A practical approach to integrating nanotechnology education and research into civil engineering undergraduate curriculum. J. Nano Educ. 1(1), 22–33 (2009)
M. D’Amore et al., Guest editorial special issue on applications of nanotechnology in electromagnetic compatibility (nano-emc). IEEE Trans. Electromagn. Compat. 54(1), 2–5 (2012)
M. Ferrari, BioMEMS and Biomedical Nanotechnology: Volume II: Micro/Nano Technologies for Genomics and Proteomics, vol. 2 (Springer, Berlin, 2007)
C. Jianrong et al., Nanotechnology and biosensors. Biotechnol. Adv. 22(7), 505–518 (2004)
P. Boisseau, B. Loubaton, Nanomedicine, nanotechnology in medicine. C R Phys. 12(7), 620–636 (2011)
D.F. Emerich, C.G. Thanos, Nanotechnology and medicine. Expert Opin. Biol. Ther. 3(4), 655–663 (2003)
J. Wilkinson, Nanotechnology applications in medicine. Med. Device Technol. 14(5), 29–31 (2003)
J.K. Patra, S. Gouda, Application of nanotechnology in textile engineering: an overview. J. Eng. Technol. Res. 5(5), 104–111 (2013)
Y. Wong et al., Selected applications of nanotechnology in textiles. AUTEX Res. J. 6(1), 1–8 (2006)
A. Zille et al., Application of nanotechnology in antimicrobial finishing of biomedical textiles. Mater. Res. Express 1(3), 032003 (2014)
T. Yamabe, K. Fukui, K. Tanaka, The Science and Technology Of Carbon Nanotubes (Elsevier, New York, 1999)
A. Elhissi et al., Chapter 20—Carbon nanotubes in cancer therapy and drug delivery, in Emerging Nanotechnologies in Dentistry, ed. by K. Subramani, W. Ahmed (William Andrew Publishing, Boston, 2012), pp. 347–363
M.S. Dresselhaus et al., Graphite Fibers and Filaments, vol. 5 (Springer, Berlin, 2013)
A. Krishnan et al., Young’s modulus of single-walled nanotubes. Phys. Rev. B 58(20), 14013 (1998)
C. Kingston et al., Release characteristics of selected carbon nanotube polymer composites. Carbon 68, 33–57 (2014)
Y. Kuwahara, T. Hirai, T. Saito, Effects of tube diameter and length on transparent conductivity of single-walled carbon nanotube network films. J. Nanomate. 2018, 1–9 (2018)
R.H. Baughman, A.A. Zakhidov, W.A. De Heer, Carbon nanotubes–the route toward applications. Science 297(5582), 787–792 (2002)
G. Gruner, Carbon nanotube transistors for biosensing applications. Anal. Bioanal. Chem. 384(2), 322–335 (2006)
E. Hammel et al., Carbon nanofibers for composite applications. Carbon 42(5), 1153–1158 (2004)
X. Wang et al., Noble metal coated single-walled carbon nanotubes for applications in surface enhanced raman scattering imaging and photothermal therapy. J. Am. Chem. Soc. 134(17), 7414–7422 (2012)
M.E. Ghica et al., Application of functionalised carbon nanotubes immobilised into chitosan films in amperometric enzyme biosensors. Sens. Actuators B Chem. 142(1), 308–315 (2009)
C. Wang et al., Synthesis and application of iron-filled carbon nanotubes coated with FeCo alloy nanoparticles. J. Magn. Magn. Mater. 321(13), 1924–1927 (2009)
J.J. Gooding, Nanostructuring electrodes with carbon nanotubes: a review on electrochemistry and applications for sensing. Electrochim. Acta 50(15), 3049–3060 (2005)
S. Sotiropoulou, N.A. Chaniotakis, Carbon nanotube array-based biosensor. Anal. Bioanal. Chem. 375(1), 103–105 (2003)
X.-L. Luo et al., Electrochemically deposited nanocomposite of chitosan and carbon nanotubes for biosensor application. Chem. Commun. 16, 2169–2171 (2005)
S. Iijima, Helical microtubules of graphitic carbon. Nature 354(6348), 56 (1991)
S. Iijima, T. Ichihashi, Single-shell carbon nanotubes of 1-nm diameter. Nature 363(6430), 603 (1993)
A.C. Eringen, D. Edelen, On nonlocal elasticity. Int. J. Eng. Sci. 10(3), 233–248 (1972)
A.C. Eringen, On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves. J. Appl. Phys. 54(9), 4703–4710 (1983)
R. Barretta et al., Stress-driven nonlocal integral model for Timoshenko elastic nano-beams. Eur. J. Mech. A. Solids 72, 275–286 (2018)
R. Barretta et al., Free vibrations of FG elastic Timoshenko nano-beams by strain gradient and stress-driven nonlocal models. Compos. B Eng. 154, 20–32 (2018)
R. Barretta et al., Stress-driven integral elastic theory for torsion of nano-beams. Mech. Res. Commun. 87, 35–41 (2018)
R. Barretta, S.A. Faghidian, R. Luciano, Longitudinal vibrations of nano-rods by stress-driven integral elasticity. Mech. Adv. Mater. Struct. 26(15), 1307–1315 (2019)
R. Barretta et al., Closed-form solutions in stress-driven two-phase integral elasticity for bending of functionally graded nano-beams. Physica E 97, 13–30 (2018)
R. Barretta et al., Stress-driven two-phase integral elasticity for torsion of nano-beams. Compos. B Eng. 145, 62–69 (2018)
J. Reddy, Nonlocal theories for bending, buckling and vibration of beams. Int. J. Eng. Sci. 45(2–8), 288–307 (2007)
M. Şimşek, Nonlocal effects in the forced vibration of an elastically connected double-carbon nanotube system under a moving nanoparticle. Comput. Mater. Sci. 50(7), 2112–2123 (2011)
M. Aydogdu, S. Filiz, Modeling carbon nanotube-based mass sensors using axial vibration and nonlocal elasticity. Physica E 43(6), 1229–1234 (2011)
Y. Lei, S. Adhikari, M.I. Friswell, Vibration of nonlocal Kelvin-Voigt viscoelastic damped Timoshenko beams. Int. J. Eng. Sci. 66–67, 1–13 (2013)
A.H. Ghorbanpour-Arani et al., Nonlocal viscoelasticity based vibration of double viscoelastic piezoelectric nanobeam systems. Meccanica 51(1), 25–40 (2016)
R. Bahaadini, M. Hosseini, Effects of nonlocal elasticity and slip condition on vibration and stability analysis of viscoelastic cantilever carbon nanotubes conveying fluid. Comput. Mater. Sci. 114, 151–159 (2016)
K. Mohammadi et al., Effect of distributed axial loading on dynamic stability and buckling analysis of a viscoelastic DWCNT conveying viscous fluid flow. J. Braz. Soc. Mech. Sci. Eng. 41(2), 93 (2019)
A. Fatahi-Vajari, A. Imam, Torsional vibration of single-walled carbon nanotubes using doublet mechanics. Z. Angew. Math. Phys. 67(4), 81 (2016)
B. Gheshlaghi, S.M. Hasheminejad, Size dependent torsional vibration of nanotubes. Physica E 43(1), 45–48 (2010)
R. Nazemnezhad, P. Fahimi, Free torsional vibration of cracked nanobeams incorporating surface energy effects. Appl. Math. Mech. 38(2), 217–230 (2017)
M.M. Adeli et al., Torsional vibration of nano-cone based on nonlocal strain gradient elasticity theory. Eur. Phys. J. Plus 132(9), 393 (2017)
M. Arda, M. Aydogdu, Torsional statics and dynamics of nanotubes embedded in an elastic medium. Compos. Struct. 114, 80–91 (2014)
S. El-Borgi et al., Torsional vibration of size-dependent viscoelastic rods using nonlocal strain and velocity gradient theory. Compos. Struct. 186, 274–292 (2018)
E. Zarezadeh, V. Hosseini, A. Hadi, Torsional vibration of functionally graded nano-rod under magnetic field supported by a generalized torsional foundation based on nonlocal elasticity theory. Mech. Based Des. Struct. Mach. 47, 1–16 (2019)
M. Hao, X. Guo, Q. Wang, Small-scale effect on torsional buckling of multi-walled carbon nanotubes. Eur. J. Mech.-A/Solids 29(1), 49–55 (2010)
Ş.D. Akbaş, Forced vibration analysis of cracked functionally graded microbeams. Adv. Nano Res. 6(1), 39–55 (2018)
S. Mareishi, H. Kalhori, M. Rafiee, S.M. Hosseini, Nonlinear forced vibration response of smart two-phase nano-composite beams to external harmonic excitations. Curved Layer. Struct. 2(1), 150–161 (2015)
R. Rostami et al., Forced vibration analysis of nano-composite rotating pressurized microbeam reinforced by CNTs based on MCST with temperature-variable material properties. Theor. Appl. Mech. Lett. 8(2), 97–108 (2018)
T. Aksencer, M. Aydogdu, Forced transverse vibration of nanoplates using nonlocal elasticity. Physica E 44(7), 1752–1759 (2012)
S.S. Rao, Vibration of continuous systems (Wiley, New York, 2019)
M. Zakeri, M. Shayanmehr, On the mechanical properties of chiral carbon nanotubes. J. Ultrafine Grained Nanostruct. Mater. 46(1), 1–9 (2013)
A. Eatemadi et al., Carbon nanotubes: properties, synthesis, purification, and medical applications. Nanoscale Res. Lett. 9(1), 393 (2014)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Khosravi, F., Hosseini, S.A. & Tounsi, A. Torsional dynamic response of viscoelastic SWCNT subjected to linear and harmonic torques with general boundary conditions via Eringen’s nonlocal differential model. Eur. Phys. J. Plus 135, 183 (2020). https://doi.org/10.1140/epjp/s13360-020-00207-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1140/epjp/s13360-020-00207-z