Abstract—The possibility of implementing two simultaneous strengthening mechanisms in a ceramic system of Al2O3 and ZrO2 is discussed, namely, a transformation mechanism due to the tetragonal form of zirconium dioxide and a dispersion one due to the in situ formation of hexaaluminates of alkaline earth elements. The concentrations of modifying additives of calcium, strontium, and barium oxides that yield the formation of corresponding hexaaluminates have been established. The influence of the formed phases on the microstructure and strength characteristics of the obtained composites is considered. The samples of composites containing strontium cations exhibit high strength characteristics, namely, the flexural strength of 700 MPa and critical stress intensity coefficient K1C up to 10 MPa m1/2, which is due to the effective combined influence of the transformation and dispersion-strengthening effects.
Similar content being viewed by others
REFERENCES
Shabanova, G.N., Pitak, Ya.N., Taranenkova, V.V., et al., Ogneupornye tsementy na osnove kompozitsii mnogokomponentnykh tsirkoniisoderzhashchikh system (Refractory Cements Based on Multicomponent Zirconium-Containing Systems Compositions), Khar’kov: Izd. Rozhko S.G., 2016.
Jerebtsov, D.A., Mikhailov, G.G., and Sverdina, S.V., Phase diagram of the system: Al2O3–ZrO2, Ceram. Int., 2000, vol. 26, no. 8, pp. 821–823.https://doi.org/10.1016/S0272-8842(00)00023-7
Lakiza S.M., Red’ko V.P., and Lopato, L.M., The Al2O3–ZrO2–Yb2O3 phase diagram. I. Isothermal sections at 1250 and 1650°C, Powder Metall. Met. Ceram., 2008, vol. 47, no. 3, pp. 202–210. https://doi.org/10.1007/s11106-008-9006-6
Chevalier, J., Liens, A., Revero, H., et al., Forty years after the promise of “Ceramic Steel?”: Zirconia-based composites with a metal-like mechanical behavior, J. Am. Ceram. Soc., 2019, vol. 103, no. 3, pp. 1482–1533. https://doi.org/10.1111/jace.16903
Zhang, F., Li, L., and Wang, E., Effect of micro-alumina content on mechanical properties of Al2O3/3Y-TZP composites, Ceram. Int., 2015, vol. 41, no. 9, pp. 12417–12425. https://doi.org/10.1016/j.ceramint.2015.06.081
Zhuravlev, V.D., Komolikov, Y.I., and Ermakova, L.V., Correlations among sintering temperature, shrinkage, and open porosity of 3.5 YSZ/Al2O3 composites, Ceram. Int., 2016, vol. 42, no. 7, pp. 8005–8009. https://doi.org/10.1016/j.ceramint.2016.01.204
Lee, S.J., Chun, S.Y., and Lee, C.H., In situ fabrication of multi-component ceramic composites by steric organic entrapment route, J. Mater. Lett., 2004, vol. 58, pp. 2646–2649. https://doi.org/10.1016/j.matlet.2004.03.036
Wang, Z.G., Ouyang, J.H., Wang,Y.J., et al., Grain size dependence, mechanical properties and surface nanoeutectic modification of Al2O3–ZrO2 ceramic, Ceram. Int., 2019, vol. 45, no. 11, pp. 14297–14304. https://doi.org/10.1016/j.ceramint.2019.04.140
Melk, L., Rovira, J.J.R., García-Marro, F., et al., Nanoindentation and fracture toughness of nanostructured zirconia/multi-walled carbon nanotube composites, Ceram. Int., 2015, vol. 41, no. 2, pp. 2453–2461. https://doi.org/10.1016/j.ceramint.2014.10.060
Kleebe, H.-J., Pezzotti, G., and Ziegler, G., Microstructure and fracture toughness of Si3N4 ceramics: Combined roles of grain morphology and secondary phase chemistry, J. Am. Ceram. Soc., 1999, vol. 82, no. 7, pp. 1857–1867. https://doi.org/10.1111/j.1151-2916.1999.tb02009.x
Naga, S.M., Elshaer, M., Awaad, M., et al., Strontium hexaaluminate ZTA composites: Preparation and characterization, Mater. Chem. Phys., 2019, vol. 232, pp. 23–27. https://doi.org/10.1016/j.matchemphys.2019.04.055
Belousova, N., Veselov, S., Cherkasova, N., et al., Techniques of SrAl12O19 platelets formation in ZTA, Appl. Mech. Mater., 2015, vol. 788, pp. 246–251.
Podzorova, L.I., Il’icheva, A.A., Pen’kova, O.I., et al., Dispersion hardening of composites in the system aluminum oxide and cerium cation stabilized tetragonal zirconium dioxide, Glass Ceram., 2017, vol. 74, nos. 5–6, pp. 204–208. https://doi.org/10.1007/s10717-017-9962-8
Il’icheva, A.A., Podzorova, L.I., Sirotinkin, V.P., et al., Formation of strontium hexaaluminate in alumina–tetragonal zirconia systems modified with strontium cations, Russ. J. Inorg. Chem., 2020, vol. 65, no. 2, pp. 154–160. https://doi.org/10.1134/S0036023620020060
Podzorova, L.I., Titov, S.A., Il’icheva, A.A., et al., Low-temperature aging of ceramic on the basis of tetragonal zirconium dioxide stabilized by cations of yttrium and ytterbium, Inorg. Mater.: Appl. Res., 2017, vol. 8, pp. 713–717. https://doi.org/10.1134/S2075113317050252
Podzorova, L.I., Titov, S.A., Ilychyova, A.A., et al., Effect of hydrothermal influence on properties and microstructure of bioinert ceramic Yb–TZP, Inorg. Mater.: Appl. Res., 2016, vol. 7, pp. 74–78. https://doi.org/10.1134/S2075113316010196
Podzorova, L.I., Il’icheva, A.A., Kutuzova, V.E., et al., Ceramic composites of the tetragonal zirconia [Yb–TZP] and alumina system modified by calcium cations, Russ. J. Inorg. Chem., 2021, vol. 66, no. 8, pp. 1169–1175. https://doi.org/10.1134/S0036023621080222
Funding
This study was performed within the framework of the state task, contract no. 075-00715-22-00.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by N. Podymova
Rights and permissions
About this article
Cite this article
Podzorova, L.I., Kutuzova, V.E., Il’ichyova, A.A. et al. Composites of the Al2O3/Yb-TZP System Modified with Calcium, Strontium, and Barium Cations. Inorg. Mater. Appl. Res. 13, 1318–1323 (2022). https://doi.org/10.1134/S2075113322050343
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113322050343