Abstract
The results of studies on the argon arc surfacing of alloys belonging to the Ti–Al, Ti–Ni, Ti–Cu, and Ti–Cu–Al systems are presented. The effect of surfacing modes on the chemical composition, as well as the technological (crack formation tendency), mechanical, and operational properties of the deposited intermetallic alloys is established.
Similar content being viewed by others
REFERENCES
Evstratov, D.A., Formation of the structure and properties of composite coatings of the Cu–Ti system on the surface of copper parts, Cand. Sci. (Eng.) Dissertation, Volgograd: Volgograd State Tech. Univ., 2016.
Uglov, V.V., Shymanski, V.I., Cherenda, N.N., Lyushkevich, V.A., Astashinskii, V.M., Astashinskaya, M.V., and Reva, O.V., Formation of titanium nickelide surface alloy under impact of compressive plasma flows on the nickel-titanium system, Inorg. Mater.: Appl. Res., 2013, vol. 4, pp. 475–480. https://doi.org/10.1134/S2075113313050183
Zorin, I.V., Sokolov, G.N., Dubtsov, Yu.N., Lysak, V.I., and Sycheva, S.S., Composite wires for surfacing alloys based on nickel and titanium aluminides, Svarka Diagn., 2011, no. 3, pp. 31–35.
Kolachev, B.A., Elagin, V.I., and Livanov, B.A., Metallovedenie i termicheskaya obrabotka tsvetnykh metallov i splavov (Metallurgy and Heat Treatment of Non-Ferrous Metals and Alloys), 4th ed., Moscow: MISIS, 2005.
Ershova, T.B., Vlasova, N.M., Astapov, I.A., and Teslina, M.A., Carboborating of the intermetallic Ti3Al-based alloys, Inorg. Mater.: Appl. Res., 2019, vol. 10, pp. 1–4. https://doi.org/10.1134/S2075113319010106
Gyunter, V.E., Khodorenko, V.N., and Yasenchuk, Yu.F., Nikelid titana. Meditsinskii material novogo pokoleniya (Titanium Nickelide. Medicine Material of New Generation), Tomsk: MITs, 2006.
Khachin, V.N., Pushin, V.G., and Kondrat’ev, V.V., Nikelid titana: Struktura i svoistva (Titanium Nickelide: Structure and Properties), Moscow: Nauka, 1992.
Materialy s pamyat’yu formy i novye meditsinskie tekhnologii (Materials with Shape Memory and New Medical Technologies), Gyunter, V.E., Ed., Tomsk: MITs, 2010.
Ayers, R.A., Simske, S.J., Bateman, T.A., Petkus, A., Sachdeva, R.L., and Gyunter, V.E., Effect of nitinol implant porosity on cranial bone ingrowth and apposition after 6 weeks, J. Biomed. Mater. Res., Part B, 1993, vol. 45, no. 1, pp. 42–47.
Kovtunov, A.I., Argonodugovaya naplavka splavami na osnove sistemy zhelezo–alyuminiy (Argon Arc Welding with Alloys Based on the Iron–Aluminum System), Tol’yatti: Togliatti State Univ., 2014.
Diagrammy sostoyaniya dvoinykh metallicheskikh sistem: Spravochnik (State Diagrams of Double Metallic Systems: Handbook), Lyakishev, N.P., Ed., 3 vols., Moscow: Mashinostroenie, 2001, vol. 3, ch. 1.
Yang, M.R. and Wu, S.K., Oxidation resistance improvement of TiAl intermetallics using surface modification, Bull. Coll. Eng., 2003, vol. 89, pp. 3–19.
Funding
This work was financially supported by the Russian Foundation for Basic Research within the scope of scientific project no. 19-38-90097.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by O. Polyakov
Rights and permissions
About this article
Cite this article
Kovtunov, A.I., Bochkarev, A.G. & Plakhotnyi, D.I. Structure and Properties of Surfaced Intermetallic Alloys Based on Titanium. Inorg. Mater. Appl. Res. 13, 94–99 (2022). https://doi.org/10.1134/S2075113322010191
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113322010191