Abstract
Changes in the structure and phase composition of the hydroxyapatite (HA) plasma coating were established during deposition at the initial temperatures of 20 and 550°C of the titanium substrate and a deposition distance of 95 and 150 mm. The structure of HA coatings was analyzed by SEM and optical microscopy. DSC analysis established the transition temperatures of HA coatings to the equilibrium state. When deposited on a substrate with an initial temperature of 20°C at a deposition distance of 95 mm, a nanostructure with a crystallite size of 21 nm is recorded in the HA coating. When the deposition distance increases to 150 mm, the nonequilibrium phase composition increases, the crystallite size decreases to 12 nm, the HA content decreases from 72 to 61%, the TTCP content decreases from 10 to 5%, and the α-TCP content increases from 17 to 30%. A nonequilibrium nanostructural state passes into a more equilibrium state with the release of heat at temperatures of 615–727°C in DSC studies. The high-temperature α-TCP phase is not recorded when the coating is deposited onto a substrate with an initial temperature of 550°C at a deposition distance of 95 mm, the TTCP content increases by two times, the size of the HA phase crystallites reaches 36 nm, and their size in the sprayed powder is 75 nm. The HA coating has a dendritic microstructure and has no thermal effect during DSC heating at an initial substrate temperature of 550°C.
Similar content being viewed by others
REFERENCES
Berndt, C.C., Hasan, F., Tietz, U., and Schmitz, K.P., A review of hydroxyapatite coatings manufactured by thermal spray, in Advances in Calcium Phosphate Biomaterials, Berlin–Heidelberg: Springer, 2014, pp. 267–329.
Dorozhkin, S.V., Functionalized calcium orthophosphates (CaPO4) and their biomedical applications, J. Mater. Chem. B, 2019, vol. 7, pp. 7471–7489.
Dong, Z.L., Khor, K.A., Quek, C.H., White, T.J., and Cheang, P., TEM and STEM analysis on heat-treated and in vitro plasma-sprayed hydroxyapatite/Ti-6Al-4V composite coatings, Biomaterials, 2003, vol. 24, no. 1, pp. 97–105.
Kalita, V.I., Komlev, D.I., Komlev, V.S., and Radyuk, A.A., The shear strength of three-dimensional capillaryporous titanium coatings for intraosseous implants, Mater. Sci. Eng., C, 2016, vol. 60, pp. 255–259.
Kalita, V.I., Radyuk, A.A., Komlev, D.I., Ivannikov, A.Yu., Komlev, V.S., and Demin, K.Yu., The boundary between the hydroxyapatite coating and titanium substrate, Inorg. Mater.: Appl. Res., 2017, vol. 8, no. 3, pp. 444–451.
Weng, J., Liu, X., Zhang, X., and de Groot, K., Integrity and thermal decomposition of apatite in coatings influenced by underlying titanium during plasma spraying and post-heat-treatment, J. Biomed. Mater. Res., 1996, vol. 30, no. 1, pp. 5–11.
Fathia, M.H., Hanifia, A., and Mortazavi, V., Preparation and bioactivity evaluation of bone-like hydroxyapatite nanopowder, J. Mater. Process. Technol., 2008, vol. 202, pp. 536–542.
Eanes, E.D., Termine, J.D., and Nylen, M.U., An electron microscopic study of the formation of amorphous calcium phosphate and its transformation to crystalline apatite, Calcif. Tissue Res., 1973, vol. 12, no. 1, pp. 143–158.
Gross, K.A., Gross, V., and Berndt, C.C., Thermal analysis of amorphous phases in hydroxyapatite coatings, J. Am. Ceram. Soc., 1998, vol. 81, no. 1, pp. 106–112.
Gross, K.A. and Berndt, C.C., Thermal processing of hydroxyapatite for coating production, J. Biomed. Mater. Res., 1998, vol. 39, pp. 580–587.
McPherson, R., Gane, N., and Bastow, T.J., Structural characterization of plasma-sprayed hydroxylapatite coatings, J. Mater. Sci.: Mater. Med., 1995, vol. 6, no. 6, pp. 327–334.
Liu, D.M., Chou, H.M., and Wu, J.D., Plasma-sprayed hydroxyapatite coating: Effect of different calcium phosphate ceramics, J. Mater. Sci.: Mater. Med., 1994, vol. 5, no. 3, pp. 147–153.
Shamray, V.F., Sirotinkin, V.P., Smirnov, I.V., Kalita, V.I., Fedotov, A.Y., Barinov, S.M., and Komlev, V.S., Structure of the hydroxyapatite plasma-sprayed coatings deposited on pre-heated titanium substrates, Ceram. Int., 2017, vol. 4, no. 12, pp. 9105–9109.
Heimann, R.B., Characterization of as-plasma-sprayed and incubated hydroxyapatite coatings with high resolution techniques, Mater. Sci. Eng. Technol., 2009, vol. 40, nos. 1–2, pp. 23–30. https://doi.org/10.1002/mawe.200800373
Noor, Z., Sumitro, S.B., Hidayat, M., Rahim, A.H., and Taufiq, A., Assessment of microarchitecture and crystal structure of hydroxyapatite in osteoporosis, Microarchit. Cryst. Struct., 2011, vol. 30, no. 1, pp. 29–35.
Suvorova, E.I. and Buffat, P.A., Electron diffraction from micro- and nanoparticles of hydroxyapatite, J. Microsc., 1999, vol. 196, pp. 46–58.
Haberko, K., Bucko, M.M., Brzezinska-Miecznik, J., Haberko, M., Mozgawa, W., Panz, T., Pyda, A., and Zarebski, J., Natural hydroxyapatite–its behaviour during heat treatment, J. Eur. Ceram. Soc., 2006, vol. 26, pp. 537–542.
Tong, W., Yang, Z., Zhang, X., Yang, A., Feng, J., Cao, Y., and Chen, J., Studies on diffusion maximum in X-ray diffraction patterns of plasma-sprayed hydroxyapatite coatings, J. Biomed. Mater. Res., 1998, vol. 40, pp. 407–413.
Wang, Y., Khor, K.A., and Cheang, P., Thermal spraying of functionally graded calcium phosphate coatings for biomedical implants, J. Therm. Spray Technol., 1998, vol. 7, no. 1, pp. 50–57.
Heimann, R.B. and Wirth, R., Formation and transformation of amorphous calcium phosphates on titanium alloy surfaces during atmospheric plasma spraying and their subsequent in vitro performance, Biomaterials, 2006, vol. 27, pp. 823–831.
ACKNOWLEDGMENTS
SEM studies were performed on equipment (LEO 1450VP) purchased at the expense of the Moscow University Development Program.
Funding
The work was supported by the Russian Science Foundation (project no. 20-19-00671).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by L. Mosina
Rights and permissions
About this article
Cite this article
Kalita, V.I., Komlev, D.I., Radyuk, A.A. et al. Structure and Phase Composition of Hydroxyapatite Plasma Coating. Inorg. Mater. Appl. Res. 12, 1236–1242 (2021). https://doi.org/10.1134/S2075113321050166
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113321050166