Abstract
Salix leaves water extract was studied for the corrosion inhibition of mild steel in H2SO4 at different temperatures. Energy dispersive spectroscopy (EDX), Gas Chromatography Mass spectrometry (GC–MS), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were used in our investigation. By applying different techniques as potentiodynamic polarization and electrochemical impedance to detect the effect of the Salix active ingredients onto the mild steel in acidic medium, it was confirmed that the corrosion process was inhibited. Salix water extract acts by decreasing the available cathodic and anodic reaction area. The adsorption isotherm has revealed that the inhibitor adsorbed on the metal surface obeys Langmuir and Temkin isotherm.
Similar content being viewed by others
REFERENCES
Oguzie, E, Corros. Sci., 2008, vol. 50, pp. 2993–2998.
Banerjee, S., Srivastava, V., and Singh, M., Corros. Sci., 2012, vol. 59, p. 35.
Bentrah, H., Rahali, Y., and Chala, A., Corros. Sci., 2014, vol. 82, p. 26.
Shukla, S.K., Quraishi, M., and Prakash, R., Corros. Sci., 2008, vol. 50, p. 2867.
Tebbji, K., Faska, N., Tounsi, A., Oudda, H., Benkaddour, M., and Hammouti, B., Mater. Chem. Phys., 2007, vol. 106, pp. 260–267.
Bentiss, F., Traisnel, M., and Lagrenee, M., Corros. Sci., 2000, vol. 42, pp. 127–146.
Ouchrif, A., Zegmout, M., Hammouti, B., Dafali, A., Benkaddour, M., Ramdani, A., and Elkadiri, S., Prog. Org. Coat., 2005, vol. 53, pp. 292–296.
Deng, S. and Xianghong, Li, Corros. Sci., 2012, vol. 64, pp. 253–262.
El-Etre, A.Y., Corros. Sci., 2003, vol. 45, pp. 2485–2495.
Gaballah, S., Shehata, N., Shaaban, M., Nosier, S., Hefnawy, A., Hamed, A., and Samir, E., Int. J. Electrochem. Sci., 2017, vol. 12, pp. 1094–1105.
Khamis, E., El-Rafey, E., Gaber, A.M.A., et al., Desalin. Water Treat., 2016, vol. 57, pp. 23571–23588.
Mahgoub, F.M., Fawziya, M., and Al-Sudairi, A.M., Prot. Met. Phys. Chem. Surf., 2011, vol. 47, p. 381.
Mahgoub, F. and Al-Rashdi, S.M., Open J. Phys. Chem., 2016, vol. 6, p. 54.
Khamis, E., Hefnawy, A., and El-Demerdash, A.M., Materialwiss. Werkstofftech., 2007, vol. 38, pp. 227–232.
Nuha, W. and Mahgoub, F.M., Open J. Phys. Chem., 2014, vol. 4, p. 6.
Obi-Egbedi, N.O., Essien, K.E., Obot, I.B., and Ebenso, E.E., Int. J. Electrochem. Sci., 2011, vol. 6, pp. 913–930.
Ferreira, E.S., Giacomelli, C., Giacomelli, F.C., and Spinelli, A., Mater. Chem. Phys., 2004, vol. 83, pp. 129–134.
Mohammed, A., El-Rehim, S.S.A., El-Sherbini, E.E.F., and Bayoumi, R.S., Electrochim. Acta, 2007, vol. 52, pp. 3588–3600.
Musa, A.Y., Kadhum, A.A.H., Mohamad, A.B., et al., Corros. Sci., 2009, vol. 51, pp. 2393–2399.
Souza, D., Sílvio, F., et al., Mater. Sci. Eng., 2012, vol. 32, pp. 2436–2444.
El-Hajjaji, F., Greche, H., Taleb, M., et al., J. Mater. Environ. Sci., 2016, vol. 7, pp. 566–578.
Karimi, I., Hayatgheybi, H., Shamspur, T., et al., Rev. Bras. Farmacogn., 2011, vol. 21, pp. 407–414.
Hai-yan, S.O.N.G., Shaanxi For. Sci., Technol., 2011, vol. 1, p. 008.
Biswas, A.K., Yang, W., and Blasiak, W., Fuel Process. Technol., 2011, vol. 92, pp. 1711–1717.
Baoying, N., Jianxia, M., Zhide, J., et al., J. Resour. Ecol., 2017, vol. 8, pp. 398–404.
Al-Mhyawi, S. R., Afr. J. Pure Appl. Chem., 2014, vol. 8, no. 1, pp. 9–22.
Muthukrishnan, P., Jeyaprabha, B., and Prakash, P., Int. J. Ind. Chem., 2014, vol. 5, no. 1, pp. 1–11.
Kavitha, O.N., Manjula, P., and Anandha, N., Res. J. Chem. Sci., 2014, vol. 4, no. 8, pp. 88–93.
Ajani, K.C., Abdulrahman, A.S., and Mudiare, E., World Appl. Sci. J., 2014, vol. 31, no. 12, pp. 2141–2147.
Oguzie, E.E., Chidiebere, M.A., Oguzie, K.L., Adindu, C.B., and Momoh-Yahaya, H., Chem. Eng. Commun., 2014, vol. 201, no. 6, pp. 790–803.
Murthy, Z.V.P. and Vijayaragavan, K., Green Chem. Lett. Rev., 2014, vol. 7, no. 3, pp. 209–219.
Al-Fakih, A.M., Aziz, M., and Sirat, H.M., J. Mater. Environ. Sci., 2015, vol. 6, no. 5, pp. 1480–1487.
Odewunmi, N.A., Umoren, S.A., and Gasem, Z.M., J. Ind. Eng. Chem., 2015, vol. 21, pp. 239–247.
Mohd, N. and Ishak, A.S., Indian J. Sci. Technol., 2015, vol. 8, no. 17, pp. 1–7.
Abdulrahman, A.S., Ganiyu, K.A., Kobe, I.H., and Caroline, A.I., Int. J. Innovative Res. Sci. Eng. Technol., 2015, vol. 4, no. 4, pp. 1809–1821.
Ji, G., Anjum, S., Sundaram, S., and Prakash, R., Corros. Sci., 2015, vol. 90, pp. 107–117.
Bhawsar, J., Jain, P.K., and, Jain P., Alexandria Eng. J., 2015, vol. 54, no. 3, pp. 769–775.
Ejikeme, P.M., Umana, S.G., Menkiti, M.C., and Onukwuli, O.D., Int. J. Mater. Chem., 2015, vol. 5, no. 1, pp. 14–23.
Anupama, K.K., Ramya, K., and Joseph, A., J. Mol. Liq., 2016, vol. 216, pp. 146–155.
Singh, A.K., Mohapatra, S., and Pani, B., J. Ind. Eng. Chem., 2016, vol. 33, pp. 288–297.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mahgoub, F.M., Hefnawy, A. & Hameed, E. Novel Green Corrosion Inhibitor for Mild Steel in Sulfuric Acid. Prot Met Phys Chem Surf 56, 450–458 (2020). https://doi.org/10.1134/S2070205120020318
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070205120020318