Abstract
The cyclic potentiodynamic polarization technique is a method for evaluating the susceptibility of a metal to localized corrosion such as pitting and crevice corrosion. This paper provides the information to conduct the cyclic polarization test correctly and to help performing the interpretation of the polarization scan properly. The effect of critical parameters including solution resistivity, scan rate, point of scan reversal, aggressive ions, corrosion inhibitors, metastable pits, metallurgical variables, temperature, dissolution gases, pH, immersion duration and surface roughness on the cyclic polarization curve and results interpretation are discussed. Then a number of cyclic potentiodynamic polarization curves for common metals and alloys in prevalent environments are given.
Similar content being viewed by others
References
Revie, R.W. and Uhlig, H.H., Corrosion and Corrosion Control, Hoboken, NJ: John Wiley and Sons, 2008.
McCafferty, E., Introduction to Corrosion Science, New York: Springer, 2010.
Hameed, R.A. and Abdallah, M., Prot. Met. Phys. Chem. Surf., 2017, vol. 1.
Hameed Abdel, R. S. and Abdallah, M., Prot. Met. Phys. Chem. Surf., 2018, vol. 54, no. 1, p.113.
Aiad, I., Shaban, Samy M., Moustafa, H.Y., and Hamed, Ahmed, Prot. Met. Phys. Chem. Surf., 2018, vol. 54, no. 1, p.135.
Khaled, R.Y. and Abdel Gaber, A., Prot. Met. Phys. Chem. Surf., 2017, vol. 53, p.956.
Sistaninia, M., Ravari, F.B., and Dadgarinezhad, A., Prot. Met. Phys. Chem. Surf., 2017, vol. 53, p.950.
Kuznetsova, E. and Remezkova, L., Prot. Met. Phys. Chem. Surf., 2001, vol. 37, p.262.
Freiman, L. and Kasatkina, M., Prot. Met. Phys. Chem. Surf., 2000, vol. 36, p.85.
Krasnoyarskii, V., Prot. Met. Phys. Chem. Surf., 2002, vol. 38, p.157.
Aliofkhazraei, M., Gharabagh, R.S., Teimouri, M., et al., Prot. Met. Phys. Chem. Surf., 2016, vol. 52, p. 1093.
Abolhassani, A., Aliofkhazraei, M., Farhadi, S.S., and Rouhaghdam, A.S., Prot. Met. Phys. Chem. Surf., 2016, vol. 52, p.658.
Farhadi, S., Aliofkhazraei, M., Darband, G., et al., J. Mater. Eng. Perform., 2017, vol. 26, p. 4797.
Sanati, A., Raeissi, K., and Edris, H., Prot. Met. Phys. Chem. Surf., 2017, vol. 53, p.902.
Mohammadnejad, M., Habibolahzadeh, A., and Yousefpour, M., Prot. Met. Phys. Chem. Surf., 2016, vol. 52, p.100.
Shreir, L.L., Burstein, G.T., and Jarman, R.A., Corrosion, Butterworth-Heinemann, 1994, vol.1.
Thompson, N.G. and Payer, J.H., DC Electrochemical Test Methods, NACE Int., 1998.
Tait, W.S., An Introduction to Electrochemical Corrosion Testing for Practicing Engineers and Scientists, PairODocs Publ., 1994.
Sun, Q., Chen, K., Fang, H., et al., Int. J. Electrochem. Sci., 2016, vol. 11, p. 5855.
Silverman, D.C., Practical Corrosion Prediction Using Electrochemical Techniques, John Wiley and Sons, 2011.
Stansbury, E.E. and Buchanan, R.A., Fundamentals of Electrochemical Corrosion, ASM Int., 2000.
ASTM G61.68: Standard Test Method, West Conshohocken, PA: ASTM Int., 2014.
Baboian, R. and Haynes, G., ASTM Int., 1981.
ASTM F2129.15: Standard Test Method, West Conshohocken, PA: ASTM Int., 2015.
Wang, B., Liu, J., Yin, M., et al., Mater. Corros., 2016, vol. 67, p.51.
Zhao, J., Xu, D., Shahzad, M.B., et al., Appl. Surf. Sci., 2016, vol. 386, p.371.
Atapour, M., Sarlak, H., and Esmailzadeh, M., Int. J. Adv. Manuf. Technol., 2016, vol. 83, p.721.
Frankel, G., J. Electrochem. Soc., 1998, vol. 145, p. 2186.
Amin, M.A., El Bagoury, N., Omar, A.A., and Megahed, A.S., Int. J. Electrochem. Sci., 2012, vol. 7, p. 2643.
Khamaj, J.A., Prot. Met. Phys. Chem. Surf., 2016, vol. 52, p.886.
Loto, R.T. and Adeleke, A., J. Failure Anal. Prev., 2016, vol. 16, p.874.
Ma, J., Wen, J., Li, Q., and Zhang, Q., J. Power Sources, 2013, vol. 226, p.156.
Zaid, B., Saidi, D., Hadji, S., and Benzaid, A., J. Corros. Sci. Eng., 2006, vol. 10, p. 1841.
Finšgar, M., Fassbender, S., Hirth, S., and Milošev, I., Mater. Chem. Phys., 2009, vol. 116, p.198.
Finšgar, M., Fassbender, S., Nicolini, F., and Milošev, I., Corros. Sci., 2009, vol. 51, p.525.
Kelly, R.G., Scully, J.R., Shoesmith, D., and Buchheit, R.G., Electrochemical Techniques in Corrosion Science and Engineering, New York: CRC Press, 2002.
Mansfeld, F.B.U., Electrochemical Corrosion Testing, ASTM Int., 1981.
Silverman, D.C., Corrosion, 1998, vol. 1, p.21.
Li, L., Qu, Q., Bai, W., et al., Int. J. Electrochem. Sci., 2012, vol. 7, p. 3773.
Junguang, H., Jiuba, W., Lemin, S., and Junwei, G., Corros. Sci. Prot. Technol., 2015, vol. 27, p.449.
Amin, M.A., Arabian J. Chem., 2013, vol. 6, p.87.
Li, T., Zhang, H., He, Y., and Wang, X., Mater. Corros., 2015, vol. 66, p.7.
Chen, S., Li, G.M., Chang, W.S., and Chen, X.Q., Proc. Int. Conference on Insulating Materials, Material Application and Electrical Engineering MAEE 2013, Changsha, 2013, vol. 80, p.84.
Ling, Y., Elkenbracht, J.C., Flanagan, W.F., and Lichter, B.D., J. Electrochem. Soc., 1997, vol. 144, p. 2689.
Cotolan, N., Pop, A., Marconi, D., et al., Mater. Corros., 2015, vol. 66, p.635.
Loto, R.T., J. Mater. Environ. Sci., 2013, vol. 4, p.448.
Salasi, M., Stachowiak, G., and Stachowiak, G., Proc. 18th Int. Corrosion Congress, Perth, 2011, p. 1335.
Lee, C.K. and Shih, H.C., J. Electrochem. Soc., 1995, vol. 142, p.731.
Adeli, M., Raeissi, K., and Golozar, M.A., Corrosion, 2010, vol. 66, p. 075002.
Chen, Y., Duval, T., Hung, U., et al., Corros. Sci., 2005, vol. 47, p. 2257.
Atapour, M., Sarlak, H., and Esmailzadeh, M., Int. J. Adv. Manuf. Technol., 2016, vol. 83, p.721.
Bavarian, B., Zhang, J., and Reiner, L., Corrosion, 2013, vol. 1, p.10.
Sherif, E.S.M., Int. J. Electrochem. Sci., 2011, vol. 6, p. 1479.
Sherif, E.S.M., Int. J. Electrochem. Sci., 2012, vol. 7, p. 4847.
Sherif, E.S.M., Potgieter, J.H., Comins, J.D., et al., Corros. Sci., 2009, vol. 51, p. 1364.
Sherif, E.M. and Almajid, A.A., Int. J. Electrochem. Sci., 2011, vol. 6, p. 2131.
Ismail, A. and Suhairi, L., Proc. 5th Int. Conference on Mechanical and Manufacturing Engineering ICME, Bandung, 2014, vol. 130, p.134.
Eghlimi, A., Shamanian, M., and Raeissi, K., Surf. Coat. Technol., 2014, vol. 244, p.45.
Shan, X., Ha, H., and Payer, J., Metall. Mater. Trans. A, 2009, vol. 40, p. 1324.
Moayed, M., Laycock, N., and Newman, R., Corros. Sci., 2003, vol. 45, p. 1203.
Liu, S., Sun, H., Sun, L., and Fan, H., Corros. Sci., 2012, vol. 65, p.520.
Michalska, J., Proc. 7th Int. Conference on Diffusion in Solids and Liquids, Mass Transfer, DSL, Algarve, 2012, vol. 620, p.625.
Duan, D., Choi, Y.S., Nešiá, S., et al., Corrosion, 2010, vol. 1, p.14.
Tzaneva, B., J. Chem. Technol. Metall., 2013, vol. 48, p.383.
Sherif, E.S.M., Almajid, A., Bairamov, A., and Al Zahrani, E., Int. J. Electrochem. Sci., 2012, vol. 7, p. 2796.
Sherif, E.S.M., Int. J. Electrochem. Sci., 2012, vol. 7, p. 4235.
Ling, Y., Elkenbracht, J.C., Flanagan, W.F., and Lichter, B.D., J. Electrochem. Soc., 1997, vol. 144, p. 2689.
Hong, T. and Nagumo, M., Corros. Sci., 1997, vol. 39, p. 1665.
Shahryari, A., Kamal, W., and Omanovic, S., Mater. Lett., 2008, vol. 62, p. 3906.
Lothongkum, G., Vongbandit, P., and Nongluck, P., Anti-Corros. Methods Mater., 2006, vol. 53, p.169.
Sherif, E.S.M., Mater. Chem. Phys., 2011, vol. 129, p.961.
Raza, M., Ghauri, F., Awan, M., et al., IOP Conf. Ser.: Mater. Sci. Eng., 2016, vol. 146, p. 012021.
Habib, K., Optik, 2011, vol. 122, p.919.
Zaid, B., Saidi, D., Benzaid, A., and Hadji, S., Corros. Sci., 2008, vol. 50, p. 1841.
Sherif, E., Int. J. Electrochem. Sci., 2012, vol. 7, p. 4235.
Pardo, A., Merino, M., Coy, A.E., et al., Corros. Sci., 2008, vol. 50, p.823.
Zhong, C., He, M., Liu, L., et al., Surf. Coat. Technol., 2010, vol. 205, p. 2412.
Rauf, A. and Mahdi, E., Int. J. Electrochem. Sci., 2012, vol. 7, p. 4673.
Bergant, Z., Trdan, U., and Grum, J., Corros. Sci., 2014, vol. 88, p.372.
Souza, M.E., Lima, L., Lima, C.R., et al., J. Mater. Sci.: Mater. Med., 2009, vol. 20, p.549.
Rosenbloom, S.N. and Corbett, R.A., An Assessment of ASTM F 2129 Electrochemical Testing of Small Medical Implants-Lessons Learned, NACE CORROSION, Houston, TX, 2007.
Raza, M.A., Ghauri, F.A., Awan, M.S., et al., Proc. 14th Int. Symposium on Advanced Materials, ISAM 2015, Islamabad, 2015.
Abbasi, S., Aliofkhazraei, M., Mojiri, H., et al., Prot. Met. Phys. Chem. Surf., 2017, vol. 53, p.573.
Rauf, A. and Mahdi, E., Int. J. Electrochem. Sci., 2012, vol. 7, p. 4673.
Souza, M.E.P., Lima, L., Lima, C.R.P., et al., J. Mater. Sci.: Mater. Med., 2009, vol. 20, p. 549.
Author information
Authors and Affiliations
Corresponding author
Additional information
The article was translated by the authors.
Rights and permissions
About this article
Cite this article
Esmailzadeh, S., Aliofkhazraei, M. & Sarlak, H. Interpretation of Cyclic Potentiodynamic Polarization Test Results for Study of Corrosion Behavior of Metals: A Review. Prot Met Phys Chem Surf 54, 976–989 (2018). https://doi.org/10.1134/S207020511805026X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S207020511805026X