Abstract
The effect of the W: (W + Mo) atomic ratio in NiMoW trimetallic catalysts on their catalytic and physicochemical properties is studied. The catalysts are prepared by impregnating a carrier containing amorphous aluminosilicate (AAS) and aluminium oxide with an aqueous solution containing Ni, Mo, W compounds, and citric acid. They are studied via XRF, TEM, NH3 TPD, and low-temperature nitrogen adsorption and are tested in the hydrocracking of vacuum gasoil (VGO). The average length of a sulfide active component layer shrinks as the amount of Mo increases and the amount of W in the catalyst is reduced. XPS data indicate that the degree of sulfidation of tungsten in NiMoW trimetallic catalysts is lower than in NiW catalyst. Testing of the catalysts in hydrocracking of a straight-line VGO at 390–420°C, 16 MPa, a feedstock hourly space velocity (FHSV) of 0.71 h−1, and a H2: VGO ratio of 1200 L/L shows the activities of hydrodesulfurization, hydrodenitrogenation, hydrogenation, and hydrocracking grow along with the W: (W + Mo) ratio. When the process pressure is high and the amount of sulfur in the NiW feedstock is low, the catalysts have higher activity in the target reactions of VGO hydrocracking than NiMo catalyst.
Similar content being viewed by others
References
Minderhoud, J.K., van Veen, J.A.R., and Hagan, A.P., in Hydrotreatment and Hydrocracking of Oil Fractions, Delmon, B., Froment, G.F., and Grange, P., Eds., Amsterdam: Elsevier Science, 1999, pp. 3–30.
Ward, J.W., Fuel Process. Technol., 1993, vol. 35, nos. 1–2, pp. 55–85.
Yasuda, H., Higo, M., Yoshitomi, S., Sato, T., Imamura, M., Matsubayashi, H., Shimada, H., Nishijima, A., and Yoshimura, Y., Catal. Today, 1997, vol. 39, nos. 1–2, pp. 77–87.
Halachev, T., Nava, R., and Dimitrov, L., Appl. Catal., A, 1998, vol. 169, no. 1, pp. 111–117.
Ali, M.A., Tatsumi, T., and Masuda, T., Appl. Catal., A, 2002, vol. 233, nos. 1–2, pp. 77–90.
Kabe, T., Aoyama, Y., Wang, D., Ishihara, A., Qian, W., Hosoya, M., and Zhang, Q., Appl. Catal., A, 2001, vol. 209, nos. 1–2, pp. 237–247.
Silva Rodrigo, R., Calderón-Salas, C., Melo-Banda, J.A., Domínguez, J.M., and Vázquez-Rodríguez, A., Catal. Today, 2004, vol. 98, nos. 1–2, pp. 123–129.
Thomazeau, C., Geantet, C., Lacroix, M., Danot, M., Harlé, V., and Raybaud, P., Appl. Catal., A, 2007, vol. 322, pp. 92–97.
Mendoza-Nieto, J.A., Vera-Vallejo, O., Escobar-Alarcón, L., Solís-Casados, D., and Klimova, T., Fuel, 2013, vol. 110, pp. 268–277.
Cervantes-Gaxiola, M.E., Arroyo-Albiter, M., Pérez-Larios, A., Balbuena, P.B., and Espino-Valencia, J., Fuel, 2013, vol. 113, pp. 733–743.
Van Haandel, L., Bremmer, M., Kooyman, P.J., van Veen, J.A.R., Weber, T., and 、Hensen, E.J.M., ACS Catal., 2015, vol. 5, no. 12, pp. 7276–7287.
Absi-Halabi, M., Stanislaus, A., and Al-Dolama, K., Fuel, 1998, vol. 77, no. 7, pp. 787–790.
US Patent 6399530, 2002.
Ivanova, A.S., Korneeva, E.V., Bukhtiyarova, G.A., Nuzhdin, A.L., Budneva, A.A., Prosvirin, I.P., Zaikovskii, V.I., and Noskov, A.S., Kinet. Catal., 2011, vol. 52, no. 3, pp. 446–458.
Scott, C.E., Perez-Zurita, M.J., Carbognani, L.A., Molero, H., Vitale, G., Guzmán, H.J., and Pereira- Almao, P., Catal. Today, 2015, vol. 250, pp. 21–27.
Zhang, M.-H., Fan, J.-Y., Chi, K., Duan, A.-J., Zhao, Z., Meng, X.-L., and Zhang, H.-L., Fuel Process. Technol., 2017, vol. 156, pp. 446–453.
Wang, C., Wang, D., Wu, Z., Wang, Z., Tang, C., and Zhou, P., Appl. Catal., A, 2014, vol. 476, pp. 61–67.
Rodríguez-Castellón, E., Jiménez-López, A., and Eliche- Quesada, D., Fuel, 2008, vol. 87, no. 7, pp. 1195–1206.
Shpak, A.P., Korduban, A.M., Medvedskij, M.M., and Kandyba, V.O., J. Electron Spectrosc. Relat. Phenom., 2007, vols. 156–158, pp. 172–175.
Yi, Y., Williams, C.T., Glascock, M., Xiong, G., Lauterbach, J., and Liang, C., Mater. Res. Bull., 2014, vol. 56, pp. 54–64.
Eijsbouts, S., Appl. Catal., A, 1997, vol. 158, nos. 1–2, pp. 53–92.
Eijsbouts, S., van den Oetelaar, L.C.A., and van Puijenbroek, R.R., J. Catal., 2005, vol. 229, no. 2, pp. 352–364.
Dufresne, P., Bigeard, P.H., and Billon, A., Catal. Today, 1987, vol. 1, no. 4, pp. 367–384.
Pereyma, V.Yu., Dik, P.P., Klimov, O.V., Budukva, S.V., Leonova, K.A., and Noskov, A.S., Russ. J. Appl. Chem., 2015, vol. 88, no. 12, pp. 1969–1975.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © P.P. Dik, V.Yu. Pereima, K.A. Nadeina, M.O. Kazakov, O.V. Klimov, E.Yu. Gerasimov, I.P. Prosvirin, A.S. Noskov, 2017, published in Kataliz v Promyshlennosti.
Rights and permissions
About this article
Cite this article
Dik, P.P., Pereima, V.Y., Nadeina, K.A. et al. Hydrocracking of Vacuum Gasoil on NiMoW/AAS-Al2O3 Trimetallic Catalysts: Effect of the W : Mo Ratio. Catal. Ind. 10, 20–28 (2018). https://doi.org/10.1134/S2070050418010026
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070050418010026