Abstract
The properties of thermoplastic binders used in the composition of polymer-composite materials have been considered. We have shown that polyethylene, polypropylene, polystyrene, polyvinyl chloride, polytetrafluoroethylene, polyethylene terephthalate, polyethylene oxide, polyphenylene sulfide, polyamides, and polyimides can be used as a binder base. The properties of binders based on thermoplastic and thermosetting matrices have been compared.
Similar content being viewed by others
REFERENCES
K. I. Donetskii, D. V. Bystrikova, R. Yu. Karavaev, and P. N. Timoshkov, “Polymer composite materials for the development of aircraft gear elements (a review),” Trudy VIAM: Elektron. Nauch.-Tekh. Zh., No. 3, 09 (2020).
R. A. Satdinov, E. A. Veshkin, V. I. Postnov, S. P. Savin, and V. V. Kulikov, “Design and production improvements in the development of spatially-complex structures made of polymer composite materials,” Trudy VIAM: Elektron. Nauch.-Tekh. Zh., No. 9, 08 (2020).
R. R. Mukhametov and A. P. Petrova, “Thermoreactive binders for polymer composite materials (a review),” Aviats. Mater. Tekhnol., No. 3, 48–58 (2019).
E. N. Kablov, L. V. Semenova, G. N. Petrova, S. A. Larionov, and D. N. Perfilova, “Polymer composite materials on a thermoplastic base,” Izv. Vyssh. Uchebn. Zaved., Ser.: Khim. Khim. Tekhnol. 59, 61–71 (2016).
E. N. Kablov, “Innovative developments of the Russian State Research Center VIAM for the implementation of the Strategic Directions for the Development of Materials and Technologies for Their Processing to 2030,” Aviats. Mater. Tekhnol., No. 1, 3–33 (2015).
E. N. Kablov, “Aviation and space materials science,” Vse Materialy. Entsiklopedicheskii Spravochnik, No. 3, 2–14 (2008).
E. N. Kablov, “Chemistry in aviation materials science,” Ross. Khim. Zh. 54, 3–4 (2010).
M. K. Sokol’skaya, A. S. Kolosova, I. A. Vitkalova, A. S. Torlova, and E. S. Pikalov, “Binders for production of state-of-the-art polymer composition materials,” Fundamental’nye Issled., No. 10-2, 290–295 (2017).
E. Ya. Beider and G. N. Petrova, “Thermoplastic binders for polymer composite materials,” Trudy VIAM: Elektron. Nauch.-Tekh. Zh., No. 11, 05 (2015).
A. Yu. Alent’ev and M. Yu. Yablokova, Binders for Polymer Composite Materials, Training Manual (Mosk. Gos. Uiv., Moscow, 2010) [in Russian].
L. I. Bondaletova and V. G. Bondaletov, Polymer Composite Materials (Part 1): Training Manual (Tomsk Politekhn. Univ., Tomsk, 2013) [in Russian].
G. N. Petrova, E. Ya. Beider, T. F. Izotova, and S. V. Malyshenok, “Composite thermoplastic materials: methods for production and processing,” Vse Materialy. Entsiklopedicheskii Spravochnik, No. 10, 10–17 (2013).
E. Ya. Beider, G. N. Petrova, T. F. Izotova, and S. L. Barbot’ko, “Glass fibers on a thermoplastic matrix,” Trudy VIAM: Elektron. Nauch.-Tekh. Zh., No. 7, 03 (2013).
G. N. Petrova and E. Ya. Beider, Structure materials on the basis of reinforced thermoplasts,” Ross. Khim. Zh. 54, 34–40 (2010).
A. E. Sorokin, G. N. Petrova, E. Ya. Beider, and D. N. Perfilova, “Layered carbon plastics on a thermoplastic matrix,” Vse Materialy. Entsiklopedicheskii Spravochnik, No. 9, 10–17 (2017).
A. E. Sorokin, E. Ya. Beider, and D. N. Perfilova, “Influence of climatic factors on the properties of carbon plastic on a polysulfone binder,” Trudy VIAM: Elektron. Nauch.-Tekh. Zh., No. 1, 10 (2015).
A. E. Sorokin, E. Ya. Beider, T. F. Izotova, E. V. Nikolaev, A. K. and Shvedkova, “Studies of the properties of carbon plastic on a polyphenylsulfide binder after accelerated and field climatic testing,” Aviats. Mater. Tekhnol., No. 4, 66–72 (2016).
S. V. Kotomin, T. I. Baranova, B. P. Plotnikova, and T. N. Filipova, “Production and properties of microplastic materials with polysulfone and montmorillonite. I. Production of microplastic materials by impregnation of aramid and glass fibers,” Vse Materialy. Entsiklopedicheskii Spravochnik, No. 2, 2–9 (2016).
S. V. Kotomin, T. I. Baranova, I. Yu. Gorbunova, and T. N. Filipova, “Production and properties of microplastic materials with polysulfone and montmorillonite. II. Strength and adhesion of microplastic materials with a polysulfone and composite matrix,” Vse Materialy. Entsiklopedicheskii Spravochnik, No. 2, 6–12 (2016).
G. Yu. Yurkov, S. V. Kondrashov, and I. D. Kraev, “Nanocomposite materials on the basis of polyethylene and cobalt nanoparticles: synthesis, structure, and properties,” Aviats. Mater. Tekhnol., No. S2, 29–33 (2014).
V. V. Glukhikh, A. E. Shkuro, N. M. Mukhin, E. I. Ostanina, I. G. Grigorov, and O. V. Stoyanov, “Properties of wood-polymer composites with a polymer matrix containing ultrathenes,” Polym. Sci., Ser. D 7, 122–126 (2014).
A. E. Chalykh, V. Yu. Stepanenko, A. A. Shcherbina, and E. G. Balashova, “Adhesive properties of ethylene and vinyl acetate copolymers,” Polym. Sci., Ser. D 2, 8–15 (2009).
M. B. Begieva, Yu. A. Malkanduev, and A. K. Mikitaev, “Composite materials on the basis of polypropylene and Na+-montmorillonite modified by N,N-diallylamineisohexane acid,” Plast. Massy, No. 9, 55–58 (2018).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by N. Podymova
Rights and permissions
About this article
Cite this article
Sorokin, A.E., Sagomonova, V.A., Petrova, A.P. et al. Thermoplastic-Based Binders for Polymer-Composite Materials (Literature Review). Polym. Sci. Ser. D 15, 359–365 (2022). https://doi.org/10.1134/S1995421222030285
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421222030285