Abstract
Modified aromatic polyethersulfones containing dichloroethylene and arylate groups in the main chain are synthesized. The kinetics of the synthesis of polyethersulfones by acceptor-catalytic polycondensation is studied. It is shown that the properties of the obtained polymers depend on the ratio of the initial monomers. The presence of two chlorine atoms in combination with an unsaturated bond in the initial monomer imparts high fire resistance and good physicochemical indices to the polyethersulfones based on it.
Similar content being viewed by others
REFERENCES
Ts. B. Tsyritorov, T. I. Andreeva, O. E. Peksimov, T. P. Kravchenko, and K. S. Piminova, “Features of obtaining high-strength polymers,” Usp. Khim. Khim. Tekhnol. 31 (11), 137–139 (2017).
Zh. I. Kurdanova, K. T. Shakhmurzova, A. A. Zhansitov, A. E. Baikaziev, S. Yu. Khashirova, S. I. Pakhomov, and M. Kh. Ligidov, “Synthesis and properties of aromatic polyesters with carded fragments,” Izv. Vyssh. Uchebn. Zaved.: Khim. Khim. Tekhnol. 60 (6), 28–39 (2017).
C. Dizman, M. Atilla Tasdelen, and Y. Yagci, “Recent advances in the preparation of functionalized polysulfones,” Polym. Int. 62 (7), 991–1007 (2013).
M. S. Haider, G. N. Shao, and S. M. Imran, “Aminated polyethersulfone-silver nanoparticles (AgNPs-APES) composite membranes with controlled silver ion release for antibacterial and water treatment applications,” Mater. Sci. Eng. 62, 732–745 (2016).
R. Giesa and H.-W. Schmidt, “High temperature stable polymers,” in Encyclopedia of Materials: Science and Technology (Elsevier, 2001). https://doi.org/10.1016/B0-08-043152-6/00677-X
A. B. Baranov, O. E. Peksimov, T. N. Prudskova, T. I. Andreeva, I. D. Simonov-Emel’yanov, and N. L. Shembel’, “Study of technological characteristics of materials based on polysulfone,” Tonkie Khim. Tekhnol. 11 (5), 87–90 (2016).
O. E. Peksimov, V. A. Balabanova, I. L. Dinzburg, and S. I. Kazakov, “Heat-resistant constructional thermoplastics—polysulfones PSF-190 and UDEL P-1700. Thermophysical, dielectric, physical, and mechanical properties in a wide range of temperatures and test rates,” Plast. Massy, No. 11, 20–21 (2013).
A. S. Borodulin, A. N. Kalinnikov, and R. C. Bazheva, “Receipt and investigation of performance characteristics of super constructions polyesters,” Int. J. Mech. Eng. Technol. 9 (13), 1117–1127 (2018).
A. S. Borodulin, A. N. Kalinnikov, and R. C. Bazheva, “Synthesis and properties of aromatic polyethersulfones,” Int. J. Mech. Eng. Technol. 9, 1109–1116 (2018).
Chen JianBing, “PEEK and PES,” in Reference Module in Materials Science and Materials Engineering (Elsevier, 2018). https://doi.org/10.1016/B978-0-12-803581-8.02607-2
A. S. Borodulin, A. N. Kalinnikov, B. Z. Beshtoev, A. M. Kharaev, R. C. Bazheva, and V. A. Kvashin, “Synthesis and performance characteristics of superstructure polyethers,” Key Eng. Mater. 816, 307–311 (2019).
E. M. Shteinberg, E. A. Sergeeva, L. A. Zenitova, and I. Sh. Abdullin, “Application and production of polysulfone. Review,” Vestn. Kazan. Tekhnol. Univ. 15 (20), 168–171 (2012).
A. Kharaev, R. Oshroeva, R. Bazheva, L. Sakhtueva, V. Kumykov, and G. Zaikov, “Synthesis and properties of halogen containing simple and complex block copolyethers,” Chem. Chem. Technol. 11 (2), 166–170 (2017).
R. Ch. Bazheva, A. M. Kharaev, E. B. Barokova, L. R. Pashtova, and A. Z. Bazhev, RU Patent No. 2702099 (2019).
L. C. Hollaway, “High performance fibre-reinforced composites for sustainable energy applications,” in High Performance Textiles and Their Applications (Woodhead Publ., 2014), pp. 366– 417. https://doi.org/10.1533/9780857099075.366
Ida Shohei, “PES(poly(ether sulfone)), polysulfone,” in Encyclopedia of Polymeric Nanomaterials (Springer, Berlin, Heidelberg, 2014). https://doi.org/10.1007/978-3-642-36199-9_238-1
C. Dizman, M. A. Tasdelen, and Y. Yagci, “Recent advances in the preparation of functionalized polysulfones,” Polym. Int. 62 (7), 991–1007 (2013). https://doi.org/10.1002/pi.4525
M. T. DeMeuse, “Polysulfones as a reinforcement in high temperature polymer blends,” in High Temperature Polymer Blends (Woodhead Publ. Ltd., 2014), pp. 165–173. https://doi.org/10.1533/9780857099013.165
R. Ch. Bazheva, A. M. Kharaev, Z. L. Beslaneeva, Z. I. Inarkieva, and A. F. Tlupov, RU Patent No. 2702104 (2019).
R. Guo and J. E. McGrath, “Aromatic polyethers, polyetherketones, polysulfides, and polysulfones,” Polym. Sci.: Compr. Ref. 5, 377–430 (2012). https://doi.org/10.1016/B978-0-444-53349-4.00153-9
R. Ch. Bazheva, A. S. Borodulin, A. N. Kalinnikov, and A. M. Charaev, “Polymer composites based on halogen-containing oligoethers,” IOP Conf. Ser.: Mater. Sci. Eng. 683, 012051 (2019). https://doi.org/10.1088/1757-899X/683/1/012051
Funding
This study was financially supported by the Russian Foundation for Basic Research, project no. 18-29-18063.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by E. Boltukhina
Rights and permissions
About this article
Cite this article
Kharaev, A.M., Bazheva, R.C., Parchieva, M.M. et al. Aromatic Polyethersulfones with Improved Physical and Mechanical Indices. Polym. Sci. Ser. D 14, 280–283 (2021). https://doi.org/10.1134/S1995421221020118
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421221020118