Abstract
The dependence of the hardness of epoxy–sand composite on the amount and dispersion of its sand component is studied. The effect of the hardness of the composite on its abrasive wear resistance is studied. It is shown that the wear resistance of the composite decreases with an increase in its hardness; i.e., this dependence is not linear and does not correspond to conventional considerations.
Similar content being viewed by others
REFERENCES
L. I. Tushinskii, A. V. Plokhov, A. O. Tokarev, and V. N. Sindeev, Materials Research Methods (Mir, Moscow, 2004) [in Russian].
A. S. Mostovoi, A. S. Nurtazina, and Yu. A. Kadykova, “Epoxy composites with improved performance, filled with dispersed mineral fillers,” Vestn. Voronezh. Gos. Univ. Inzh. Tekhnol. 80 (3), 330–334 (2018).
E. A. Surkov and V. G. Gusev, “Effect of additives on mechanical properties of composite materials based on polymers,” in Proc. VI Int. Sci.-Pract. Conference Innovation, Quality, and Service in Engineering and Technology (Kursk, 2016), pp. 280–285.
M. M. Khrushchev and M. A. Babichev, Abrasive Wear (Nauka, Moscow, 1970) [in Russian].
M. L. Kerber, V. M. Vinogradov, and G. S. Golovkin, Polymer Composite Materials: Structure, Properties, and Technology: Handbook, Ed. by A. A. Berlin (TsOP Professiya, St. Petersburg, 2018) [in Russian].
A. M. Mikhal’chenkov and A. A. Loktev, “Features of the technique for measuring the microhardness of heterogeneous materials on the example of gray cast iron with lamellar graphite,” Vse Mater., Entsikl. Sprav., No. 6, 62–65 (2017).
A. O. Gorlenko, S. V. Davydov, M. Yu. Shevtsov, and D. A. Boldyrev, “Wear-resistance increase of friction surfaces of steel machine parts by electro-mechanical hardening,” Steel Transl. 49, 800–805 (2019).
GOST (State Standard) R 56761–2015: Polymer Composites. Method for Determination of Hardness according to Barcol (2015).
A. M. Mikhal’chenkov, I. V. Kozarez, A. A. Tyureva, and V. Kuz’min, “Technique of comparative accelerated tests for resistance to abrasive wear when moving in loose abrasive,” Vse Mater., Entsikl. Sprav., No. 9, 40–43 (2017).
A. M. Mikhalchenkov and Y. Y. Biryulina, “Construction for wear tests of abrasion-resistant adhesive composite materials,” Polym. Sci., Ser. D 10 (2), 150–152 (2017).
A. M. Mikhal’chenkov and A. A. Loktev, “Features of the technique for measuring the microhardness of heterogeneous materials on the example of gray cast iron with lamellar graphite,” Vse Mater., Entsikl. Sprav., No. 6, 62–65 (2017).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by A. Muravev
Rights and permissions
About this article
Cite this article
Mikhal’chenkov, A.M., Kononenko, A.S., Tyureva, A.A. et al. The Effect of the Concentration of Components and Dispersion of Particles of Filler of Epoxy–Sand Composite on Hardness and Its Relationship with Abrasive Wear Resistance. Polym. Sci. Ser. D 14, 17–20 (2021). https://doi.org/10.1134/S1995421221010184
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421221010184