Abstract
The rheological and basic physicomechanical characteristics of cured VSK-14-2m, VSK-14-2mR, and VSK-50 molten adhesive binders are presented. It has been shown how the binder processing technology for the manufacture of polymer composite material (PCM) determines the requirements for the rheological properties of binder. The technologies for processing the studied binders into PCM are proposed.
Similar content being viewed by others
REFERENCES
E. N. Kablov, “Innovations of the All-Russian Institute of Aviation Materials (VIAM) as part of implementing the Strategic Directions of Development of Materials and Technologies of Their Processing for the Period up to 2030,” Aviats. Mater. Tekhnol., No. 1, 3–33 (2015). doi 10.18577/2071-9140-2015-0-1-3-33
T. A. Kirienko, N. F. Lukina, K. E. Kutsevich, and A. P. Petrova, “A study of the rheological properties of adhesive binders,” Polym. Sci., Ser. D 9 (3), pp. 295–297 (2016).
N. F. Lukina, L. A. Dement’eva, A. P. Petrova, T. A. Kirienko, and L. V. Chursova, “Adhesive binders for PCM components of a cellular structure,” Polym. Sci., Ser. D 9 (4), 387–391 (2016).
L. A. Dement’eva, K. E. Kutsevich, N. F. Lukina, and A. P. Petrova, “Investigation of adhesive binders for the production of polymer composite materials,” Nov. Materialoved., Nauka Tekh., No. 2, 24–35 (2016). http://www.materialsnews.ru. Accessed August 2, 2017.
D. A. Mel’nikov, A. A. Gromova, A. E. Raskutin, and A. O. Kurnosov, “Theoretical calculation and experimental determination of the modulus of elasticity and strength of fiberglass VPS-53/120,” Tr. Vseross. Inst. Aviats. Mater., No. 1 (2017). doi 10.18577/2307-6046-2017-0-1-8-8
M. A. Khaskov, D. A. Mel’nikov, and L. A. Dement’eva, “Optimization of curing modes of epoxy compositions with allowance for the scale factor,” in Collection of Works: New Materials and Technologies for Deep Processing of Raw Materials are the Basis for the Innovative Development of the Russian Economy (Vseross. Inst. Aviats. Mater., Moscow, 2017), p. 30 [in Russian].
I. S. Deev, E. N. Kablov, L. P. Kobets, and L. V. Chursova, “Scanning electron microscopy of the deformation of the microphase structure of polymer matrices under mechanical loading,” Tr. Vseross. Inst. Aviats. Mater., No. 7 (2014). doi 10.18577/2307-6046-2014-0-7-6-6
N. F. Lukina, E. V. Kotova, L. V. Chursova, and T. A. Kirienko, “Adhesive binders for layered alumopolymer composite materials,” Polym. Sci., Ser. D 9 (4), 392–395 (2016).
ACKNOWLEDGMENTS
This work was performed within integrated research trend 15.1: Multifunctional Adhesive Systems (“Strategic Development Trends of Materials and Technologies for Their Processing for the Period until 2030”).
This work was performed with the participation of L.A. Dement’eva and E.V. Kotova.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by E. Petrova
Rights and permissions
About this article
Cite this article
Petrova, A.P., Lukina, N.F., Mel’nikov, D.A. et al. Mechanical Properties of Cured Adhesive Binders. Polym. Sci. Ser. D 11, 352–354 (2018). https://doi.org/10.1134/S1995421218040184
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421218040184