Abstract
The solution of a spatial non-steady problem of the influence of a moving heat flow source (laser heating) on the surface of half-space using superposition principle and transient functions method is presented, and a numerical analytical algorithm based on discretization in time and space coordinates is developed and realized.
Similar content being viewed by others
REFERENCES
E. Mirkoohi, J. R. Dobbs, and S. Y. Liang, ‘‘Analytical mechanics modeling of in-process thermal stress distribution in metal additive manufacturing,’’ J. Manuf. Process. 58, 41–54 (2020). https://doi.org/10.1016/j.jmapro.2020.08.009
A. Babaytsev, V. Dobryanskiy, and Y. Solyaev, ‘‘Optimization of thermal protection panels subjected to intense heating and mechanical loading,’’ Lobachevskii J. Math. 40 (7), 887–895 (2019). https://doi.org/10.1134/S1995080219070059
O. V. Tushavina, ‘‘Coupled heat transfer between a viscous shock gasdynamic layer and a transversely streamlined anisotropic half-space,’’ INCAS Bull., Spec. Iss. 12, 211–220 (2020). https://doi.org/10.13111/2066-8201.2020.12.S.20
P. F. Pronina, Y. Sun, and O. V. Tushavina, ‘‘Mathematical modelling of high-intensity heat flux on the elements of heat-shielding composite materials of a spacecraft,’’ J. Appl. Eng. Sci. 18, 693–698 (2020). https://doi.org/10.5937/jaes0-28086
J.-P. Kruth, J. Deckers, E. Yasa, and R. Wauthle, ‘‘Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method,’’ Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf. 226, 980–991 (2012). https://doi.org/10.1177/0954405412437085
O. Fergani, F. Berto, T. Welo, and S. Y. Liang, ‘‘Analytical modelling of residual stress in additive manufacturing,’’ Fatigue Fract. Eng. Mater. Struct. 40, 971–978 (2017). https://doi.org/10.1111/ffe.12560
H. S. Carslaw and J. C. Jaeger, Conduction of Heat in Solids (Oxford Univ. Press, London, 1959).
A. V. Lykov and Y. A. Mikhailov, Theory of Heat and Mass Transfer (Vysshaya Shkola, Moscow, 1967; Israel Program Sci. Transl., Jerusalem, 1963).
E. Yu. Mikhailova, G. V. Fedotenkov, and D. V. Tarlakovskii, ‘‘Impact of transient pressure on a half-space with membrane type coating,’’ Struct. Integr. 16, 312–315 (2020).
G. V. Fedotenkov and D. V. Tarlakovskii, ‘‘Non-stationary contact problems for thin shells and solids,’’ Struct. Integr. 16, 287–292 (2020).
A. S. Okonechnikov, G. V. Fedotenkov, and D. V. Tarlakovskii, ‘‘Spatial non-stationary contact problem for a cylindrical shell and absolutely rigid body,’’ Mech. Solids 55, 366–376 (2020).
G. V. Fedotenkov, E. Yu. Mikhailova, E. L. Kuznetsova, and L. N. Rabinskiy, ‘‘Modeling the unsteady contact of spherical shell made with applying the additive technologies with the perfectly rigid stamp,’’ Int. J. Pure Appl. Math. 111, 331–342 (2016).
L. A. Igumnov, A. S. Okonechnikov, D. V. Tarlakovskii, and G. V. Fedotenkov, ‘‘Plane nonstationary problem of motion of the surface load over an elastic half space,’’ J. Math. Sci. 203, 193–201 (2014).
D. V. Tarlakovskii and G. V. Fedotenkov, ‘‘Analytic investigation of features of stresses in plane nonstationary contact problems with moving boundaries,’’ J. Math. Sci. 162, 246–253 (2009).
Funding
The work was financially supported by the Ministry of Science and Higher Education of the Russian Federation (project code FSFF-2020-0017).
Author information
Authors and Affiliations
Corresponding authors
Additional information
(Submitted by A. M. Elizarov)
Rights and permissions
About this article
Cite this article
Orekhov, A.A., Rabinskiy, L.N., Fedotenkov, G.V. et al. Heating of a Half-Space by a Moving Thermal Laser Pulse Source. Lobachevskii J Math 42, 1912–1919 (2021). https://doi.org/10.1134/S1995080221080229
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995080221080229