Abstract
Composite powder materials containing zirconia and iron oxide nanoparticles, as well as iron-zirconium intermetallic compounds, are of great interest for use as high-temperature functional coatings, in catalysis, and for medical and biotechnological purposes. In this work the influence of the forming local structure of particles during the mechanical activation of Fe/Zr and Fe2O3/(Fe/Zr) powder precursors on the microstructure of Fe2O3/Fe/Zr/ZrO2 nanocomposites, synthesized in a SHS combustion mode, is investigated.
Similar content being viewed by others
References
F. Bernard and E. Gaffet, “Mechanical alloying in SHS research,” Int. J. Self-Propag. High-Temp. Synth. 2, 109–131 (2001).
V. V. Kurbatkina, A. S. Rogachev, and N. A. Kochetov, “Mechanoactivation of SHS system and processes,” Int. J. SHS 16 (1), 46–50 (2007).
N. Z. Lyakhov, T. L. Talako, and T. F. Grigor’eva, in Mechanoactivation Effect onto Phase- and Structure Formation Processes under Self-Propagating High-Temperature Synthesis, Ed. by O. I. Lomovskii (Parallel’, Novosibirsk, 2008) [in Russian].
A. S. Rogachev and A. S. Mukas’yan, “Burning of heterogeneous nanostructured systems,” Fiz. Goreniya Vzryva 46 (3), 3–30 (2010).
T. F. Grigor’eva, A. I. Letsko, T. L. Talako, S. V. Tsybulya, I. A. Vorsina, A. P. Barinova, A. F. Il’yushchenko, and N. Z. Lyakhov, “The way to produce Cu/ZrO2 composites by combining mechanical activation and self-propagating high-temperature synthesis,” Fiz. Goren. Vzryva 47 (2), 54–58 (2011).
T. F. Grigor’eva, A. I. Letsko, T. L. Talako, S. V. Tsybulya, I. A. Vorsina, A. P. Barinova, A. F. Il’yushchenko, and N. Z. Lyakhov, “The way to produce Cu/TiO2 composites by combining mechanical activation and self-propagating high-temperature synthesis,” Zh. Prikl. Khim. 84 (11), 1765–1768 (2011).
State Diagrams for Double Metallic Systems, Ed. by N. P. Lyakishev (Mashinostroenie, Moscow, 1996–2000) [in Russian].
T. Yu. Kiseleva, A. A. Novakova, A. N. Falkova, T. L. Talako, and T. F. Grigor’eva, “The way to produce Fe0.70−x CrxAl0.3/Al2O3 nanocomposite by means of SHS method from mechanically activated Cr2O3 + Fe + Al mixtures,” Neorgan. Mater. 45 (7), 827–831 (2009).
T. Yu. Kiseleva, T. F. Grigor’eva, D. V. Gostev, V. B. Potapkin, A. N. Falkova, and A. A. Novakova, “Structure research of Fe-Al nanomaterial produces by mechanical activation and self-propagating high-temperature synthesis,” Vestn. Moskovsk. Univ. Ser. 3. Fiz., Astron., No. 1, 56–61 (2008).
G. N. Konygin, N. Stevulova, G. A. Dorofeev, and E. P. Elsukov, “Effect of crushing bodies onto results of mechanical alloying of Fe and Si powders mixtures,” Khim. Interes. Ustoich. Razvit. 10 (1–2), 119–126 (2002).
L. Del Bianko, A. Hernando, and E. Bonetti, “Grainboundary structure and magnetic behavior in nanocrystalline ball-milled iron,” Phys. Rev. B 56 (14), 8894–8901 (1997).
A. A. Novakova, O. V. Agladze, T. Yu. Kiseleva, B. P. Tarasov, and N. S. Perov, “The grain boundary structure influence n the magnetic properties of nanocrystalline iron,” Bull. Russ. Acad. Sci. Phys. 65 (7), 1016–1021 (2001).
V. P. Filippov, “Potentialities of Mossbauer spectroscopy for studying zirconium alloys and their oxide films,” Metal Sci. Heat Treat. 45 (11–12), 452–460 (2003).
V. P. Filippov, A. B. Bateev, Yu. A. Lauer, and N. I. Kargin, “Mossbauer spectroscopy of zirconium alloys,” Hyperfine Interact. 217, 45–55 (2013).
Mechanocomposites Precursors for Creating Materials with New Properties, Ed. by O. I. Lomovskii (Siberian Branch RAS, Novosibirsk, 2010) [in Russian].
T. Y. Kiseleva, A. A. Novakova, M. I. Chistyakova, A. O. Polyakov, T. S. Gendler, and T. F. Grigorieva, “Iron-based amorphous magnetic phase formation in the course of Fe and F2O3 mechanical activation,” Diffusion Defect Data Part B: Solid State Phenom. 152, 25–28 (2009).
T. F. Grigor’eva, A. P. Barinova, and N. Z. Lyakhov, Mechanochamical Synthesis in Metallic Systems (Parallel’, Novosibirsk, 2008) [in Russian].
T. Yu. Kiseleva, A. A. Novakova, T. F. Grigor’eva, A. P. Barinova, and I. A. Vorsina, “Mechanical synthesis for corundum ceramics/intermetallide nanocomposites,” Perspekt. Mater., No. 6, 11–20 (2008).
T. Kiseleva, A. Novakova, M. Zimina, S. Polyakov, E. Levin, and T. Grigoryeva, “Mechanochemically induced formation of amorphous phase at oxide nanocomposite interfaces,” J. Phys.: Conf. Ser. 217 (1), 012106–012106 (2010).
G. Stefanic, S. Music, and A. Gajovic, “Structural and microstructural changes in monoclinic ZrO2 during ball milling with stainless steel assembly,” Mater. Res. Bull. 41, 764–777 (2006).
J. Z. Jiang, F. W. Poulsen, and S. Morup, “Structure and thermal stability of nanostructured iron-doped zirconia prepared by high energy ball milling,” J. Mater. Res. 14 (4), 1343–1452 (1999).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kiseleva, T.Y., Letsko, A.I., Talako, T.L. et al. Mechanochemically synthesized powder precursors local structure influence on the microstructure of SHS Fe2O3/Fe/Zr/ZrO2 composites. Nanotechnol Russia 10, 220–230 (2015). https://doi.org/10.1134/S1995078015020123
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995078015020123