Abstract
Effectiveness of the application of a 3D-printed plastic boluses for electron beam therapy is studied. Boluses are custom-made items intended to provide a required depth distribution of the absorbed dose. Limitations of currently used standard boluses are their simple form, fragility, and complex production. The approach proposed eliminates these disadvantages.
Similar content being viewed by others
REFERENCES
V. Vyas et al., “On bolus for megavoltage photon and electron radiation therapy,” Med. Dosim. 38, 268–273 (2013).
E. Endarko et al., “Evaluation of dosimetric properties of handmade bolus for megavoltage electron and photon radiation therapy,” J. Biomed. Phys. Eng. 11, 735 (2021).
A. A. Grigorieva et al., “Applicability of 3D-printed polymer compensators for modulated electron radiotherapy (MERT),” Biomed. Eng. 54, 337–341 (2021).
R. F. Moyer et al., “A surface bolus material for high-energy photon and electron therapy,” Radiology 146, 531–532 (1983).
White PLA plastic best filament for 3D-printers 1 kg (1.75 mm). https://bestfilament.ru/pla-1-1.75-white.
E. A. Bushmina et al., “The influence of the fill and extrusion factors in 3D printing on the electron and X-ray densities of plastic products,” Biomed. Eng. 56, 278–281 (2022).
3D-printer Creator 3—FlashForge. www.flashforge.com/product-detail/1 (11.11.2022).
Linear medical accelerator Elekta Synergy. www.elekta.com/products/radiation-therapy/synergy (11.11.2022).
IBA Dosimetry phantom SP34. www.iba-dosimetry.com/fileadmin/user_upload/rt-br-e-phantoms-for-ad_rev2_0813.pdf (11.11.2022).
Gafchromic EBT3 specification and user guide. www.gafchromic.com/documents/EBT3_Specifications.pdf (11.11.2022).
D. Lewis et al., “An efficient protocol for radiochromic film dosimetry combining calibration and measurement in a single scan,” Med. Phys. 39, 6339–6350 (2012).
P. Sipila et al., “Gafchromic EBT3 film dosimetry in electron beams energy dependence and improved film read-out,” J. Appl. Clin. Med. Phys. 17, 360–373 (2016).
Funding
This work was supported by the Russian Science Foundation, project no. 19-79-100014-П.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Rights and permissions
About this article
Cite this article
Bushmina, E., Bulavskaya, A., Grigorieva, A. et al. Studying the Option to Form Depth Dose Distribution of an Electron Beam Using a 3D-Printed Plastic Bolus. Phys. Part. Nuclei Lett. 20, 1531–1533 (2023). https://doi.org/10.1134/S1547477123060079
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1547477123060079