Abstract
A constructive technology of the solution of the parametrized problems of the programmed optimal control of systems with the distributed parameters under the conditions of different requirements for the permissible deviation of the resulting spatial distribution of the controlled value from the set magnitude in the uniform metric is proposed. The developed technique uses a special procedure of the one-criterion convolution of the considered constraints and the subsequent reduction to the typical form of the problems of mathematical programming on the extremum of a function of a finite number of variables with an infinite number of constraints (semi-infinite optimization problem), which is solved by the scheme of the previously developed alternance method. An example of optimization by the criteria of the speed and energy consumption of unsteady heat conduction processes with two different restrictions on the accuracy of approximation to the given temperature conditions, which is of independent interest, is given.
Similar content being viewed by others
References
A. G. Butkovskii, Optimal Control Theory for Systems with Distributed Parameters (Nauka, Moscow, 1965) [in Russian].
E. Ya. Rapoport, Optimal Control for Systems with Distributed Parameters (Vyssh. Shkola, Moscow, 2009) [in Russian].
Yu. E. Pleshivtseva and E. Ya. Rapoport, “The successive parameterization method of control actions in boundary value optimal control problems for distributed parameter systems,” J. Comput. Syst. Sci. Int. 48, 351 (2009).
E. Ya. Rapoport, Alternance Method for Solving Applied Optimization Problems (Nauka, Moscow, 2000) [in Russian].
L. Collatz and W. Krabs, Approximations Theorie (Teubner, Stuttgart, 1973).
E. Ya. Rapoport, “Minimax optimization of stationary states in systems with distributed parameters,” J. Comput. Syst. Sci. Int. 52, 165 (2013).
Yu. E. Pleshivtseva and E. Ya. Rapoport, “Joint optimization of interrelated thermophysical processes in metal working systems based on system quality criteria,” Optoelectron., Instrum. Data Process. 49, 527 (2013).
A. G. Butkovskii, S. A. Malyi, and Yu. N. Andreev, Optimal Control of Heating Metals (Metallurgiya, Moscow, 1972) [in Russian].
T. K. Sirazetdinov, Optimization of Systems with Distributed Parameters (Nauka, Moscow, 1977) [in Russian].
E. Rapoport and Yu. Pleshivtseva, Optimal Control of Induction Heating Processes (CRC, Taylor and Francis Group, London, New York, Boca Raton, 2007).
E. Ya. Rapoport and Yu. E. Pleshivtseva, Optimal Control of Temperature Modes of Induction Heating (Nauka, Moscow, 2012) [in Russian].
E. Ya. Rapoport and Yu. E. Pleshivtseva, “Optimal control of induction heating of metals prior to warm and hot forming,” in ASM Handbook, Vol. 4C: Induction Heating and Heat Treatment (ASM Int., USA, 2014), pp. 366–401.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.E. Pleshivtseva, E.Ya. Rapoport, 2018, published in Izvestiya Akademii Nauk, Teoriya i Sistemy Upravleniya, 2018, No. 5.
Rights and permissions
About this article
Cite this article
Pleshivtseva, Y.E., Rapoport, E.Y. Parametric Optimization of Systems with Distributed Parameters in Problems with Mixed Constraints on the Final States of the Object of Control. J. Comput. Syst. Sci. Int. 57, 723–737 (2018). https://doi.org/10.1134/S1064230718050118
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1064230718050118