Abstract
Examples of creeping in long-running shafts of high-temperature rotors in power turbines are given. The creeping manifests itself in the form of a spiral-shaped deformation of the surface of the axial channel and, at the same time, as spiral-arranged flaws within the thickness of the shaft, detectable by the ultrasonic method. The forces and moments of forces acting on the rotor during its operation are considered, as well as their connection with detected operational defects. Criteria for the state of metal in a rotor with operational defects are discussed with the aim to assess its residual life and ensure its safe operation.
Similar content being viewed by others
References
Rezinskikh, V.F., Ginzburg, E.S., Klypina, A.M., et al., Metodicheskie rekomendatsii i atlas povrezhdenii detalei protochnoi chasti turbin. Issledovanie izlomov (Methodological Recommendations and Atlas of Damage to Parts of Turbine Wheelspace. Study of Fractures), Moscow: VTI, 1993.
Rezinskikh, V.F., Gladshtein, V.I., and Avrutskii, G.D., Uvelichenie resursa dlitel’no rabotayushchikh parovykh turbin (Increasing Service Life of Long-Running Steam Turbines), Moscow: Moscow Power Eng. Inst., 2007.
Siegel, M., Newhouse, E., and Schreiner T. (Siemens/KWU), Re-Certification of Turbine Elements, in Sb. dokl. na mezhdunar. konf. “Prodlenie resursa TES” (Proc. Int. Conf. “Extension of Thermal Power Plant Service Life”), Moscow: VTI, 1994, vol. 3, report no. 25, p. 45 (transl. from German).
I 34-70-013-84. Instructions for testing metal in boilers, turbines, and pipelines. Moscow: SPO Soyuztekhenergo, 1984.
RD 10-577-03. Typical instructions for testing metal and extending service life of the main elements of boilers, turbines, and pipelines at thermal power plants, Moscow: NTTs Gosgortekhnadzor RF, 2003.
SO 153-34.17.440-2003. Instructions for extending service life of steam turbines beyond fleet life, Moscow: TsPTI ORGRES, 2004.
Gofman, Yu.M., Otsenka rabotosposobnosti metalla energooborudovaniya TES (Evaluation of Performance of Metal in Power Equipment of TPP), Moscow: Energoatomizdat, 1990.
Temryukh, V.M., Volkov, B.I., and Balashov, Yu.V., Diagnostics, repair, and lifespan assessment of steam turbine rotors made of 34KhM steel with defects on axial channel surface, in Nauchn.-tekh. konf. “Metall oborudovaniya TES. Problemy i perspektivy”/Sb. dokl. (Proc. Sci. Tech. Conf. “Metal of TPP Equipment. Problems and Prospects”), Moscow: OAO VTI, 2006, pp. 194–198.
I 34-70-005-82. Instructions for ultrasonic testing of one-piece forged rotors of steam turbines on axial-channel side, Moscow: SPO Soyuztekhenergo, 1984.
Permikin, V.S. and Stadnikov, Ya.V., Is repeated ultrasonic testing of rotor needed on axial-channel side? in Nauchn.-tekh. konf. “Resurs, nadezhnost’ i bezopasnost’ teplosilovogo oborudovaniya elektrostantsii”/Sb. dokl. (Proc. Sci. Tech. Conf. “Lifespan, Reliability, and Safety of Thermal Power Equipment of Power Plants”) Moscow: OAO VTI, 2011, pp. 169–171.
Permikin, V.S., Permikin, D.V., Stadnikov, Ya.V., and Shumakher, V.A., Creep of metal in steam turbine rotors, in Mezhdunar. nauchn.-tekh. konf. “Diagnostika i resurs metalla teplosilovogo oborudovaniya elektrostantsii”/Sb. dokl. (Proc. Int. Sci. Tech. Conf. “Diagnostics and Lifespan of Metal of Thermal Power Equipment of Power Plants”), Moscow: OAO VTI, 2016, pp. 199–205.
Permikin, V.S., RF Patent no. 2177612, A method for ultrasonic testing of the state of metal working under creep conditions, predicting metal residual life, and an acoustic unit for method implementation (options), December 27, 2001.
RTM 108.021.13-83. Calculating the shafting of turbine unit for a sudden short circuit, Leningrad: OAO NPO TsKTI, 1984.
Antikain, P.A., Metally i raschet na prochnost’ kotlov i truboprovodov (Metals and Strength Calculations for Boilers and Pipelines), Moscow: Energoatomizdat, 1990.
Ermolaev, V.V., Zhuchenko, L.A., Shklyar, A.I., et al., Problems of damageability of low-temperature steam turbine rotors, in Nauchno-tekh. konf. “Metall oborudovaniya TES. Problemy i perspektivy”/Sb. dokl. (Proc. Sci. Tech. Conf. “Metal Equipment of TPP. Problems and Prospects”), Moscow: OAO VTI, 2006, pp. 214–219.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Russian Text © V.S. Permikin, D.V. Permikin, 2019, published in Defektoskopiya, 2019, No. 1, pp. 23–31.
Rights and permissions
About this article
Cite this article
Permikin, V.S., Permikin, D.V. On the Creep of High-Temperature Rotors in Steam Power Turbines. Russ J Nondestruct Test 55, 22–30 (2019). https://doi.org/10.1134/S1061830919010091
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830919010091