Skip to main content
SpringerLink
Log in

Formation of Fine Surface of Long Rails on Differentiated Hardening

  • Published:
Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques Aims and scope Submit manuscript

Abstract—

by methods of transmission electron diffraction microscopy the layer-by-layer analysis was carried out and quantitative parameters of structural phase states, dislocation substructure, internal stress fields and particles of carbide phase in the head of 100-meter rails along the central axis and along the fillet after differentiated hardening were revealed. It was shown that differentiated hardening forms a morphologically multi-aspect structure presented by grains of lamellar perlite, ferrite-carbide mixture and structurally free ferrite in surface layers up to 10 mm in depth. It was determined that the structure being formed has a gradient character. The state of surface layer depends on direction of study (along central axis and along the fillet) and depth of occurrence of the layer under study. It was detected that relative content of structurally free ferrite grains and ferrite-carbide mixture grains decrease when distance from rail surface increases. The facts revealed as a result of the studies performed testify to a higher cooling rate of fillet surface with respect to surface material located along the central axis.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.

Similar content being viewed by others

REFERENCES

  1. V. E. Gromov, A. B. Yuriev, K. V. Morozov, and Y. F. Ivanov, Microstructure of Quenched Rails (Cambridge Int. Sci., Cambridge, 2016).

    Google Scholar 

  2. E. A. Shur, Damage of Rails (Intext, Moscow, 2012) [in Russian].

    Google Scholar 

  3. Yu. Ivanisenko and H. J. Fecht, Steel Tech. 3 (1), 19 (2008).

    Google Scholar 

  4. Yu. Ivanisenko, I. Maclaren, X. Souvage, R. Z. Valiev, and H. J. Fecht, Acta Mater. 54, 1659 (2006).

    Article  CAS  Google Scholar 

  5. E. Courtois-Manara, L. Kormanaeva, A. V. Ganeev, R. Z. Valiev, C. Kubel, and Yu. Ivanisenko, Mater. Sci. Eng., A 581, 81 (2013). https://doi.org/10.1016/j.msea.2013.05.008

    Article  CAS  Google Scholar 

  6. V. E. Gromov, O. A. Peregudov, Yu. F. Ivanov, K. V. Morozov, K. V. Alsaraeva, and O. A. Semina, J. Surf. Invest.: X-ray, Synchrotron Neutron Tech. 9 (6), 1292 (2015). https://doi.org/10.1134/S1027451015060282

    Article  CAS  Google Scholar 

  7. V. E. Gromov, Yu. F. Ivanov, O. A. Peregudov, K. V. Morozov, X. L. Wang, W. B. Dai, Yu. V. Ponomareva, and O. A. Semina, Mater. Electron. Eng. 2 (4), 4 (2015). https://doi.org/10.11605/mee-2-4

    Article  Google Scholar 

  8. Yu. F. Ivanov, V. E. Gromov, O. A. Peregudov, K. V. Morozov, and A. B. Yur’ev, Steel Transl. 45 (4), 254 (2015). https://doi.org/10.3103/S0967091215040075

    Article  Google Scholar 

  9. O. A. Peregudov, V. E. Gromov, Yu. F. Ivanov, K. V. Morozov, K. V. Alsaraeva, and O. A. Semina, AIP Conf. Proc. 1683 (4) (2015). https://doi.org/10.1063/1.4932869

  10. V. E. Gromov, O. A. Peregudov, K. V. Morozov, and A. B. Yur’ev, Steel Transl. 45 (10), 759 (2015). https://doi.org/10.3103/S0967091215100058

    Article  Google Scholar 

  11. V. G. Gavriljuk, Mater. Sci. Eng., A 345, 81 (2003). https://doi.org/10.1016/S0921-5093(02)00358-1

    Article  Google Scholar 

  12. Y. J. Li, P. Chai, C. Bochers, S. Westerkamp, S. Goto, D. Raabe, and R. Kirchheim, Acta Mater. 59, 3965 (2011). https://doi.org/10.1016/j.actamat.2011.03.022

    Article  CAS  Google Scholar 

  13. V. G. Gavriljuk, Scr. Mater. 45, 1469 (2001). doi (01)01185-Xhttps://doi.org/10.1016/S1359-6462

  14. O. A. Peregudov, K. V. Morozov, V. E. Gromov, A. M. Glezer, and Yu. F. Ivanov, Russ. Metall. (Engl. Transl.) 2016 (4), 371 (2016). https://doi.org/10.1134/S0036029516040182

  15. V. E. Gromov, Y. F. Ivanov, K. V. Morozov, O. A. Peregudov, and O. A. Semina, J. Surf. Invest.: X-ray, Synchrotron Neutron Tech. 10 (5), 1101 (2016). https://doi.org/10.1134/S1027451016050281

    Article  CAS  Google Scholar 

  16. Y. F. Ivanov, K. V. Morozov, O. A. Peregudov, and V. E. Gromov, Steel Transl. 46 (8), 567 (2016). https://doi.org/10.3103/S0967091216080088

    Article  Google Scholar 

  17. F. R. Egerton, Physical Principles of Electron Microscopy (Springer, Basel, 2016).

    Book  Google Scholar 

  18. C. S. S. R. Kumar, Transmission Electron Microscopy. Characterization of Nanomaterials (Springer, New York, 2014).

    Book  Google Scholar 

  19. C. B. Carter and D. B. Williams, Transmission Electron Microscopy (Springer, Berlin, 2016).

    Book  Google Scholar 

  20. P. B. Hirsch, A. Howie, R. B. Nickolson, et al., Electron Microscopy of Thin Crystals (Butterworths, Washington D.C., 1965; Mir, Moscow, 1968).

  21. L. M. Utevskii, Diffraction Electron Microscopy in Metal Science (Metallurgiya, Moscow, 1973) [in Russian].

    Google Scholar 

  22. N. A. Koneva, D. V. Lychagin, S. P. Zhukovsky, et al., Phys. Met. Metallogr. 60 (1), 171 (1985).

    CAS  Google Scholar 

  23. N. A. Koneva and E. V. Kozlov, Izv. Vyssh. Uchebn. Zaved., Fiz., No. 8, 3 (1982).

  24. N. A. Koneva, D. V. Lychagin, L. A. Teplyakov, et al., in Disclinations and Rotating Deformation of Solids (Fiz.-Tekh. Inst., St. Petersburg, 1998) [in Russian], p. 103.

    Google Scholar 

  25. L. A. Teplyakova, L. N. Ignatenko, N. F. Kasatkina, et al., in Plastic Deformation of Alloys. Structurally Inhomogeneous Materials (Tomsk. Gos. Univ., Tomsk, 1987) [in Russian], p. 26.

    Google Scholar 

  26. Yu. F. Ivanov, V. E. Gromov, N. A. Popova, S. V. Konovalov, and N. A. Koneva, Structural Phase States and Mechanisms of Deformed Steel (Poligrafist, Novokuznetsk, 2016) [in Russian].

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Siberian State Industrial University, 654007, Novokuznetsk, Russia

    V. E. Kormyshev, V. E. Gromov, Yu. A. Rubannikova & A. P. Semin

  2. Institute of High Current Electronics Siberian branch of the Russian Academy of Sciences, 634055, Tomsk, Russia

    Yu. F. Ivanov

  3. JSC EVRAZ-West-Siberian Metallurgical Combine, 654043, Novokuznetsk, Russia

    A. A. Yuriev

Authors
  1. V. E. Kormyshev
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yu. F. Ivanov
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. V. E. Gromov
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. A. A. Yuriev
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Yu. A. Rubannikova
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. A. P. Semin
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to V. E. Gromov.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kormyshev, V.E., Ivanov, Y.F., Gromov, V.E. et al. Formation of Fine Surface of Long Rails on Differentiated Hardening. J. Surf. Investig. 14, 1187–1190 (2020). https://doi.org/10.1134/S1027451020060099

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S1027451020060099

Keywords:

Search

Navigation