Abstract
To improve the performance of asphalt, the modified asphalt was prepared by adding styrene-butadiene-styrene block copolymer (SBS) and sulfur powders into the base asphalt. The storage behavior of asphalts was tested to optimize the quality of adding SBS and sulfur. The storage stability and viscoelastic properties of modified asphalts were also studied. The results showed that under the proportioning final addition of SBS and sulfur, the storage stability, the high and low-temperature performance of asphalt was greatly improved, making it possible to meet the stability requirements for high-temperature storage of asphalt. Additionally, only a small amount of acidic sulfur-containing gas such as H2S escaped during the modification process. The microscopic observation showed that the “sea-islands” form of SBS-modified asphalt was changed to a uniform and continuous dual-phase structure after sulfur addition. Finally, it was proposed that sulfur induced the chemical reaction between SBS and asphalt to form a stable network structure, which was the intrinsic mechanism to improve the performance of asphalt.
Similar content being viewed by others
REFERENCES
Karpenko, A.V., Karpenko, D.V., and Solovev, D.B., Materials Sci. Forum, 2020, vol. 992, pp. 31–35. https://doi.org/10.4028/www.scientific.net/MSF.992.31
He, R., Liang, Y., Gao, L., Chen, H., Yang, B., Guo, F., and Geng, J., Adv. Civ. Eng., 2020, vol. 2020, 11 pp. https://doi.org/10.1155/2020/6699416
Xu, J., Pei, J., Cai, J., Liu, T., and Wen, Y., Construct. Build. Mater., 2021, vol. 300, no. 5, p. 123735. https://doi.org/10.1016/j.conbuildmat.2021.123735
Feng, Z., Yu, J., and Han, J., Constr. Build. Mater., 2011, vol. 25, no. 1, pp. 129–137. https://doi.org/10.1016/j.conbuildmat.2010.06.048
Qian, C.D., Fan, W.Y., Yang, G.M., Han, L., Xing, B., and Lv, X., Constr. Build. Mater., 2020, vol. 235, p. 117517. https://doi.org/10.1016/j.conbuildmat.2019.117517
Fu, Q.H., Xu, G., Chen, X.H., Zhou, J., and Sun, F., Constr. Build. Mater., 2019, vol. 215, pp. 1–8. https://doi.org/10.1016/j.conbuildmat.2019.04.076
Feng, Z. and Hu, C., Constr. Build. Mater., 2013, vol. 43, no. 6, pp. 461–468. https://doi.org/10.1016/j.conbuildmat.2013.03.001
Gladkikh, V.A. and Korolev, E.V., Adv. Mater. Res., 2014, vol. 1040, pp. 387–392. https://doi.org/10.4028/www.scientific.net/AMR.1040.387
Dutta, U., J. Mater. Civ. Eng., 1998, vol. 10, pp. 40–44. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:1(40)
Airey, G.D. and Rahimzadeh, B., Constr. Build. Mater., 2004, vol. 18, pp. 535–548. https://doi.org/10.1016/j.conbuildmat.2004.04.008
Thodesen, C., Shatanawi, K., Amirkhanian, S., and Bridges, W., Constr. Build. Mater., 2009, vol. 23, no. 5, pp. 1922–1927. https://doi.org/10.1016/j.conbuildmat.2008.09.002
Ahmedzade, P., Fainleib, A., Günay, T., Starostenko, O., and Kovalinska, T., Int. J. Polym. Sci., 2013, pp. 8062–8070. https://doi.org/10.1155/2013/141298
Wong, W.-g. and Li, G., Constr. Build. Mater., 2009, vol. 23, no. 7, pp. 2504–2510. https://doi.org/10.1016/j.conbuildmat.2009.02.030
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare no conflict of interest requiring disclosure in this article.
Rights and permissions
About this article
Cite this article
Zeng, J., Zhao, J. Mechanism and Performance Investigation of SBS/Sulfur Composite Modified Asphalt. Pet. Chem. 62, 732–739 (2022). https://doi.org/10.1134/S0965544122050140
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0965544122050140