Abstract
Results of integrated water model studies of temperature fields and a flow pattern of a nonisothermal primary coolant in the elements of the fast neutron reactor (hereinafter, fast reactor) primary circuit with primary sodium in different regimes, such as forced circulation (FC), transition to the reactor cooldown and emergency cooldown with natural coolant convection, are presented. It is shown that, under the influence of lift forces on the nonisothermal coolant flow in the upper chamber at the periphery of its bottom region over the side shields, a stable cold coolant isothermal zone is formed, whose dimensions increase with increase of total water flowrate. An essential and stable coolant temperature stratification is detected in the peripheral area of the upper (hot) chamber over the side shields, in the pressure and cold side chambers, in the elevator baffle, in the cooling system of the reactor vessel, and in the outlet of intermediate and autonomous heat exchangers in different operating regimes. Large gradients and temperature fluctuations are registered at the interface of stratified and recycling formations. In all of the studied cooldown versions, the coolant outlet temperature at the core fuel assembly is decreased and the coolant temperature in the peripheral zone of the upper chamber is increased compared to the FC. High performance of a passive emergency cooldown system of a fast reactor (BN-1200) with submersible autonomous heat exchangers (AHE) is confirmed. Thus, in a normal operation regime, even in case of malfunction of three submersible AHEs, the temperature of the equipment inside the reactor remains within acceptable limits and decay heat removal from the reactor does not exceed safe operation limits. The obtained results can be used both for computer code verification and for approximate estimate of the reactor plant parameters on the similarity criteria basis.
Similar content being viewed by others
References
A. A. Goverdovskii, S. G. Kalyakin, and V. I. Rachkov, “The alternative strategies of the development of the nuclear power industry in the 21st century,” Therm. Eng. 61, 319–326 (2014). doi 10.1134/S0040601514050048
D. G. Zaryugin, V. M. Poplavskii, V. I. Rachkov, A. P. Sorokin, Yu. E. Shvetsov, S. A. Rogozhkin, and S. F. Shepelev, “Computational and experimental validation of the planned emergency heat-removal system for BN-1200,” At. Energy 116, 271–277 (2014).
V. I. Rachkov, S. G. Kalyakin, O. F. Kukharchuk, Yu. I. Orlov, and A. P. Sorokin, “From the first nuclear power plant to fourth-generation nuclear power installations [on the 60th anniversary of the world’s first nuclear power plant],” Therm. Eng. 61, 327–336 (2014). doi 10.1134/S0040601514050073
Proc. of Specialists Meeting of IAEA Oarai Engineering Center on Evaluation of Decay Heat Removal by Natural Convection, Oarai, Japan, Feb. 22–23, 1993 (IAEA, 1993).
P. A. Ushakov and A. P. Sorokin, “Role of the Reynolds number in modeling natural convection in liquid metals,” At. Energy 84, 314–319 (1998).
N. M. Matyukhin, A. N. Opanasenko, R. S. Pomet’ko, and A. P. Sorokin, “Unsteady-state natural convection and problems of simulation of fast reactor primary circuit thermal hydraulics under emergency cool-down conditions,” in Proc. 11th Int. Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-11), Avignon, France, Oct. 2–6, 2005 (NURETH-11, 2005).
A. N. Opanasenko, A. P. Sorokin, D. G. Zaryugin, and V. I. Rachkov, “Coolant stratification in nuclear power facilities,” At. Energy 111, 172–178 (2011).
P. A. Ushakov and A. P. Sorokin, “Modeling problems of emergency natural convection heat removal in the upper plenum of LMR using water,” in Proc. 9th Int. Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-9), California, San Francisco, Oct. 3–8, 1999 (NURETH-9, 1999).
P. A. Ushakov, A. P. Sorokin, and N. M. Matyukhin, “The role of hydraulic resistances in simulating natural convection in vessels of fast reactors using water,” Therm. Eng. 47, 383–389 (2000).
P. A. Ushakov and A. P. Sorokin, “Modeling problems of emergency natural convection heat removal in the upper plenum of LMR using water,” in Proc. 8th Int. Conf. on Nuclear Engineering (ICONE-8), Baltimore, MD, Apr. 2–6, 2000 (Am. Soc. Mech. Eng., 2000), Paper id. ICONE-8078.
N. M. Matjukhin and A. P. Sorokin, “Transient natural circulation and issues of modeling thermohydraulic in the primary circuit of fast reactors in conditions of decay heat removal,” in Proc. 11th Meeting of the International Association for Hydraulic Research (IAHR) Working Group on Hydrodynamics and Heat Transfer in Reactor Components Cooled by Liquid Coolant in Single/Two-Phase, Obninsk, July 5–9, 2004 (IAEA, Vienna, 2005), pp. 420–427.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.N. Opanasenko, A.P. Sorokin, D.G. Zaryugin, A.A. Trufanov, 2017, published in Teploenergetika.
Rights and permissions
About this article
Cite this article
Opanasenko, A.N., Sorokin, A.P., Zaryugin, D.G. et al. Fast reactor: an experimental study of thermohydraulic processes in different operating regimes. Therm. Eng. 64, 336–344 (2017). https://doi.org/10.1134/S0040601517050056
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0040601517050056