Abstract
Non-uniform distribution of air in radial flow adsorber restricts the development of large-scale air separation units (ASUs). The cross-sectional areas of central and annular channels, bed porosity and structure parameters of distributor in central channel are summarized as the main factors affecting the distribution performance of adsorber. Effects of these three primary factors in flow distribution are investigated using computational fluid dynamics (CFD). Considering the coupling relationship between adsorption and regeneration processes of adsorber, a comprehensive optimization scheme is proposed. It concludes that, the optimal design of cross-sectional diameters of central and annular channels is 0.25 and 0.86 m, and the adsorption and regeneration uniformity can reach 95.36 and 94.81%, respectively. Moreover, with the decrease of bed porosity, pressure drop uniformity and static pressure will rise, and the reasonable range of porosity should be between 0.2 and 0.3. Finally, it is proved that the uniformity of adsorption and regeneration can be simultaneously improved by adjusting the structural parameters of the bottom distributor, and results show that the uniformity of adsorption and regeneration can increase by 0.29 and 2.30%, respectively.
Similar content being viewed by others
REFERENCES
Song, X., Wang, A.Z., Jin, Y., et al., Investigations on hydrodynamics of radial flow moving bed reactors, Chem. Eng. Technol., 1993, vol. 16, no. 6, p. 383.
Tian, Q., He, G., Wang, Z., Cai, D. and Chen, L., A novel radial adsorber with parallel layered beds for prepurification of large-scale air separation units, Ind. Eng. Chem. Res., 2015, vol. 54, no. 30, p. 7502.
Ghosal, A.K., Samanta, A.N., and Maiti, B.R., Experimental study on the simultaneous adsorption of carbon dioxide and moisture from nitrogen in Linde 5A molecular sieves, Can. J. Chem. Eng., 1999, vol. 77, no. 5, p. 997.
Ghoshal, A.K., Samanta, A.N., and Maiti, B.R., Studies on the effects of certain non-dimensional groups on dynamic simultaneous adsorption behaviour of carbon dioxide and moisture in molecular sieve, Can. J. Chem. Eng., 2003, vol. 81, no. 5, p. 1075.
Li, G., Xiao, P., Zhang, J., and Webley, P.A., The role of water on postcombustion CO2 capture by vacuum swing adsorption: Bed layering and purge to feed ratio, AIChE J., 2014, vol. 60, no. 2, p. 673.
Rege, S.U., Yang, R.T., and Buzanowski, M.A., Sorbents for air prepurification in air separation, Chem. Eng. Sci., 2000, vol. 55, no. 21, p. 4827.
Zhang, X.B., Chen, J.Y., Yao, L., Huang, Y.H., Zhang, X.J., and Qiu, L.M., Research and development of large-scale cryogenic air separation in China, J. Zhejiang Univ. Sci. A, 2014, vol. 15, no. 5, p. 309.
Rege, S.U., Yang, R.T., Qian, K, et a., Air-prepurification by pressure swing adsorption using single/layered beds, Chem. Eng. Sci., 2001, vol. 56, p. 2745.
Lu, J.L., Zhang, X.J., Qiu, L.M., and Wang, X.L., Theoretical analysis of uniform flow distribution in vertical radial adsorption bed, J. Chem. Ind. Eng., 2012, vol. s2. p. 21.
Zhang, X.J., Lu, J.L., Qiu, L.M., Zhang, X.B., and Wang, X.L., A mathematical model for designing optimal shape for the cone used in z-flow type radial flow adsorbers, Chin. J. Chem. Eng., 2013, vol. 21, no. 5, p. 494.
Monereau, C., Pullumbi, P., and Gueret, V., US Patent 8574346, 2013.
Epiepang, F.E., Li, J., Liu, Y., and Yang, R.T., Low-pressure performance evaluation of CO2, H2O and CH4 on Li-LSX as a superior adsorbent for air prepurification, Chem. Eng. Sci., 2016, vol. 147, p. 100.
Kapoor, A. and Yang, R., Roll-up in fixed-bed, multicomponent adsorption under pore-diffusion limitation, AIChE J., 1987, vol. 33, no. 7, p. 1215.
Zughbi, H.D. and Sheikh, S., Numerical simulation of flow distribution in unpacked and partially packed vessels, Math. Comput. Appl., 2004, vol. 9, no. 1, p. 25.
Kareeri, A.A., Zughbi, H.D., and Al-Ali, H.H., Simulation of flow in a radial flow fixed bed reactor (RFBR), Proc. 4th International Conference on CFD in the Oil and Gas Industry, Metallurgical Process Industries, Trondheim, Norway, 2005, p. 1.
Zhang, C.F., Zhu, Z.B., Xu, M.S., and Zhu, B.C., An investigation of design on the uniform fluid distribution for radial flow reactors, J. Chem. Ind. Eng., 1979, vol. 30, no. 1, p. 67.
Kareeri, A.A., Zughbi, H.D., and Al-Ali, H.H., Simulation of flow distribution in radial flow reactors, Ind. Eng. Chem. Res., 2006, vol. 45, no. 8, p. 2862.
Wang, H.Y., Liu, Y.S., and Meng, Y., Effect of the gas distribution system structure of a radial flow adsorber on gas distribution, Chin. J. Eng., 2015, vol. 37, no. 1, p. 91.
Tang, Z.L., Xu, M.Y., and Zhang J., Simulation and analysis on gas flow distribution in radial flow air adsorber, J. Tianjin Univ., 2016, vol. 49, no. 3, p 305.
Li, Y., Si, H.Q., Wang, B., Xue, L., and Wu, X.H., Optimization design research of air flow distribution in vertical radial flow adsorbers, Korean J. Chem. Eng., 2018, vol. 35, no. 4, p. 835.
Chen, Y., Zhang, X.J., Lu, J.L., Qiu, L.M., Zhang, X.B., Sun, D.M., and Gan, Z.H., Flow characteristics of radial flow adsorber and its structure parameters optimization, Chin. J. Chem. Eng., 2014, vol. 65, no. 9, p. 3395.
Ko, D., Moon, I., and Choi, D.K., Analysis of the contact time in a cyclic thermal swing adsorption process, Ind. Eng. Chem. Res., 2002, vol. 41, no. 6, p. 1603.
Funding
We would like to acknowledge the support provided by the Postgraduate Research & Practice Innovation Program of Jiangsu Province (KYCX20_0214) and the National Natural Science Foundation of China (11272151).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, Y., Si, H.Q., Wang, H.B. et al. Numerical Investigation of Integrated Design on Uniform Fluid Distribution for Radial Flow Adsorber. Theor Found Chem Eng 55, 894–905 (2021). https://doi.org/10.1134/S0040579521050274
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0040579521050274