Abstract—Changes in the structure, phase composition, microhardness, and modulus of elasticity upon thermohydrogen treatment of the VTI4 alloy based on the orthorhombic titanium aluminide Ti2AlNb alloyed with hydrogen to 12.5 at % have been studied using electron microscopy, X-ray diffraction analysis, and microindentation. It has been shown that the alloying of this alloy with hydrogen leads to a decrease in peak stresses and to an increase in the degree of deformation to the formation of cracks in the course of upsetting at 900°C. The kinetics of dehydrogenation at the temperatures of 600 and 700°C for 4 h in an argon flow and in vacuum has been studied. The thermohydrogen treatment of the VTI4 alloy makes it possible to obtain a thermostable state with a safe hydrogen content with a predominance of the O phase in the structure and high physical and mechanical properties (the Vickers hardness up to 5300 MPa, the contact modulus of elasticity to 114 GPa) after the final dehydrogenating annealing in the vacuum at 600°C for 4 h.
Similar content being viewed by others
REFERENCES
O. S. Kashapov, A. V. Novak, N. A. Nochovnaya, and T. V. Pavlova, “State-of-the-art, problems, and prospects of creating heat-resistant titanium alloys for GTE parts”, Trudy VIAM (Electronic journal), No. 3 (2013).
S. V. Skvortsova, A. A. Il’in, A. M. Mamonov, N. A. Nochovnaya, and O. Z. Umarova, “Structure and properties of semifinished sheet products made of an intermetallic refractory alloy based on Ti2AlNb”, Mater. Sci. 51, 821–826 (2016).
N. A. Nochovnaya, E. B. Alekseev, A. Yu. Izotova, and A. V. Novak, “Fireproof titanium alloys and features of their use”, Titan, No. 4, 42–46 (2012).
A. S. Yurovskikh, S. L. Demakov, and E. V. Kolosova, “Features of the structure and phase composition of the Ti–23Al–26Nb/Al laminated material obtained by the method of plasma-spark sintering”, Metalloved. Term. Obrab/ Met/, No. 9, 35–40 (2012).
L. T. Zhang, K. Itu, V. K. Vasudevan, and M. Yamaguchi, “Hydrogen absorption and desorption in a B2 single-phase Ti–22Al–27Nb alloy before and after deformation”, Acta Mater. 49, 751–758 (2001).
A. M. Patselov, V. V. Rybin, B. A. Greenberg, and N. V. Mushnikov, “Hydrogen absorption in as-cast bcc single-phase Ti–Al–Nb alloys”, J. Alloys Compd. 505, 183–187 (2010).
S. Wang, W. Xu, Y. Zong, X. Zhong, and D. Shan, “Effect of initial microstructure on hot deformation behavior and workability of Ti2AlNb-based alloy”, Metals 8, 382 (2018). https://doi.org/10.3390/met8060382
X. Jiao, B. Kong, W. Tao, G. Liu, and H. Ning, “Effects of annealing on microstructure and deformation uniformity of Ti–22Al–24Nb–0.5Mo laser welded joints”, Mater. Des. 130, 166–174 (2017).
M. Li, Q. Cai, Y. Liu, Z. Ma, Z. Wang, Y. Huang, and H. Li, “Formation of fine B2/β + O structure and enhancement of hardness in the aged Ti2AlNb-based alloys prepared by spark plasma sintering”, Metall. Mater. Trans. A 48, 4365–4371 (2017).
J. L. Yang, G. F. Wang, W. C. Zhang, W. Z. Chen, X. Y. Jiao, and K. F. Zhang, “Microstructure evolution and mechanical properties of P/M Ti–22Al–25Nb alloy during hot extrusion”, Mater. Sci. Eng., A 699, 210–216 (2017).
A. A. Popov, A. G. Illarionov, S. L. Demakov, and O. A. Elkina, “Study of phase transformations in the titanium–niobium–hydrogen system”, Int. J. Hydrogen Energy 22, 195–200 (1997).
A. A. Il’in, B. A. Kolachev, V. K. Nosov, and A. M. Mamonov, Hydrogen Technology of Titanium Alloys (MISiS, Moscow, 2002).
F. H. Froes and O. N. Senkov, J. I. Qazi, “Hydrogen as a temporary alloying element in titanium alloys: Thermohydrogen processing”, Int. Mater. Rev. 49, 227–245 (2013).
A. G. Illarionov, S. V. Grib, A. A. Popov, S. L. Demakov, M. S. Karabanalov, O. G. Khadzhieva, and O. A. Elkina, “Effect of hydrogen on the formation of the structure and phase composition in the Ti2AlNb-based alloy”, Phys. Met. Metallogr. 109, 142–152 (2010).
S. V. Skvortsova, O. N. Gvozdeva, V. A. Pozhoga, S. S. Slezov, and T. G. Yagudin, “Hydrogen technology as an effective technological method of controlling the structure and mechanical and technological properties of alloys based on titanium and titanium aluminide”, Titan, No. 4 (54), 49–53 (2016).
U. Zwicker and H. Scheicher, U.S. Patent No. 2892742 (1959).
B. A. Kolachev and V. K. Nosov, Hydrogen Plasticization during Hot Deformation of Titanium Alloys (Metallurgiya, Moscow, 1986) [in Russian].
A. Ovchinnikov, S. Skvortsova, A. Mamonov, and E. Yermakov, “Influence of hydrogen on plastic flow of the titanium and its alloys”, Acta Metall. Slovaca 23, 122–134 (2017).
A. A. Popov, A. G. Illarionov, S. V. Grib, S. L. Demakov, M. S. Karabanalov, and O. A. Elkina, “Phase and structural transformations in the alloy on the basis of the orthorhombic titanium aluminide”, Phys. Met. Metallogr. 106, 399–410 (2008).
O. G. Khadzhieva, A. G. Illarionov, and A. A. Popov, “Effect of aging on structure and properties of quenched alloy based on orthorhombic titanium aluminide Ti2AlNb”, Phys. Met. Metallogr. 115, 12–20 (2014).
O. G. Khadzhieva, A. G. Illarionov, A. A. Popov, and S. V. Grib, “Effect of hydrogen on the structure of quenched orthorhombic titanium aluminide-based alloy and phase transformations during subsequent heaing”, Phys. Met. Metallogr. 114, 529–534 (2013).
A. G. Illarionov, O. G. Khadzhieva and O. A. Elkina, “Formation of the structure and properties upon the aging of a quenched alloy based on orthorhombic titanium aluminide Ti2AlNb alloyed with hydrogen”, Phys. Met. Metallogr. 119, 797–801 (2018).
N. O. Osintseva, “Phase and structural transformations in hydrogen-containing alloys of the Ti–Al–V system”, Abstract of Candidate’s Dissertation in Engineering (MATI, Moscow, 2000) [in Russian].
B. S. Krylov, Kinetics of hydrogen evolution in vacuum from titanium materials, in Titanium and its Alloys. Vol. 10. Study of Titanium Alloys (Izd-vo AN SSSR, Moscow, 1963), pp. 159–167 [in Russian].
B. A. Kolachev, V. V. Sadkov, V. D. Talalaev, and A. V. Fishgoit, Vacuum Annealing of Titanium Structures (Mashinostroenie, Moscow, 1991) [in Russian].
F. Tang, T. Awane, and M. Hagiwara, “Effect of compositional modification on Young’s modulus of Ti2AlNb-based alloy”, Scr. Mater. 46, 143–147 (2002).
Funding
The work was supported by the resolution no. 211 of the government of the Russian Federation, contract no. 02.A03.21.0006, and by the state tasks of the Ministry of Education and Science of the Russian Federation for the Ural Federal University within the framework of the basic theme no. 11.8386.2017/BCh and for the Institute of Metal Physics, Ural Branch, Russian Academy of Sciences (code “Struktura”).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by G. Salnikov
Rights and permissions
About this article
Cite this article
Illarionov, A.G., Khadzhieva, O.G., Illarionova, S.M. et al. Formation of the Structure and Properties upon Thermohydrogen Treatment of the Alloy Based on Titanium Aluminide Ti2AlNb. Phys. Metals Metallogr. 120, 969–975 (2019). https://doi.org/10.1134/S0031918X19100028
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0031918X19100028