Abstract
The infrared thermography method was used to study changes in the temperature of austenitic stainless steel in the process of tensile deformation. It was revealed that the temperature of the sample stops growing in the transition region between the linear stages of strain hardening. This phenomenon can be connected with a change in the entropy of the deformed medium as a result of a reconstruction of the ordered autowave structures. In the region of true deformation exceeding 0.4, a phenomenon of discontinuous flow (Portevin–Le Chậtelier effect) is observed, which is accompanied by the motion of the single fronts of localized deformation. The observed fronts are heat sources, and the value of the temperature at the arbitrary point of the sample is determined by its position relative to the front of deformation.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
REFERENCES
J. A. Rodríguez-Martínez, R. Pesci, and A. Rusinek, “Experimental study on the martensitic transformation in AISI 304 steel sheets subjected to tension under wide ranges of strain rate at room temperature,” Mater. Sci. Eng., A 528, 5974–5982 (2011).
O. A. Plekhov, “Experimental study of thermodynamics of plastic deformation by infrared thermography,” Tech. Phys. 56, 301–304 (2011).
A. Chrysochoos, “Infrared thermography applied to the analysis of material behavior: A brief overview,” Quant. Infrared Thermogr. J. 9, 193–208 (2012).
S. Bagavathiappan, B. B. Lahiri, T. Saravanan, J. Philip, and T. Jayakumar, “Infrared thermography for condition monitoring—A review,” Infrared Phys. Technol. 60, 35–55 (2013).
L. B. Zuev, V. V. Gorbatenko, and K. V. Pavlichev, “Elaboration of speckle photography techniques for plastic flow analyses,” Meas. Sci. Technol. 21, 054014 (2010).
H. Louche and A. Chrysochoos, “Thermal and dissipative effects accompanying Lüders band propagation,” Mater. Sci. Eng., A 307, 15–22 (2001).
N. Ranc and D. Wagner, “Some aspects of Portevin–Le Chatelier plastic instabilities investigated by infrared pyrometry,” Mater. Sci. Eng., A 394, 87–95 (2005).
X. G. Wang, L. Wang, and M. X. Huang, “Kinematic and thermal characteristics of Lüders and Portevin–Le Châtelier bands in a medium Mn transformation-induced plasticity steel,” Acta Mater. 124, 17–29 (2017).
O. A. Plekhov, N. Saintier, and O. Naimark, “Experimental study of energy accumulation and dissipation in iron in an elastic–plastic transition,” Tech. Phys. 52, 1236–1238 (2007).
M. A. Sokovikov, D. A. Bilalov, V. V. Chudinov, S. V. Uvarov, O. A. Plekhov, A. I. Terekhina, and O. B. Naimark, “Nonequilibrium transitions in ensembles of defects attributed to dynamic localization of plastic deformation,” Tech. Phys. Lett. 40, 1075–1077 (2014).
Yu. P. Sharkeev, V. P. Vavilov, O. A. Belyavskaya, V. A. Skripnyak, D. A. Nesteruk, A. A. Kozulin, and V. M. Kim, “Analyzing deformation and damage of VT1-0 Titanium in different structural states by using infrared thermography,” J. Nondestruct. Eval. 35, issue 3, article 42 (2016).
A. Chrysochoos, B. Wattrisse, J. M. Muracciole, and Y. El Kaïm, “Fields of stored energy associated with localized necking of steel,” J. Mech. Mater. Struct. 4, 245–262 (2009).
L. B. Zuev, “Autowave processes of the localization of plastic flow in active media subjected to deformation,” Phys. Met. Metallogr. 118, 810–819 (2017).
D. V. Orlova, A. G. Lunev, L. V. Danilova, and L. B. Zuev, “Macroscopic criteria for the deformation and fracture of iron based alloys,” Frat. ED INTEGRITA Strutt., No. 42, 293–302 (2017).
L. B. Zuev and S. A. Barannikova, “Experimental study of plastic flow macro-scale localization process: Pattern, propagation rate, dispersion,” Int. J. Mech. Sci. 88, 1–7 (2014).
L. B. Zuev and S. A. Barannikova, “Autowaves of localized plastic flow, velocity of propagation, dispersion, and entropy,” Phys. Met. Metallogr. 112, 109–116 (2011).
L. B. Zuev, “Entropy of localized plastic strain waves,” Tech. Phys. Lett. 31, 89–90 (2005).
R. Honeycombe, The Plastic Deformation of Metals (Cambridge University Prerss, Cambridge (U. K.), 1968; Mir, Moscow, 1972).
L. E. Murr, K. P. Staudhammer, and S. S. Hecker, “Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: Part II. Microstructural study,” Metall. Trans. A 13, 627–635 (1982).
G. Nicolis and I. Prigogin, Self-organization in Nonequilibrium Systems: From Dissipative Structures to Order Through Fluctuations (Wiley, New York, 1977; Mir, Moscow, 1979).
V. L. Berdichevsky, “Entropy of microstructure,” J. Mech. Phys. Solids 56, 742–771 (2008).
Funding
The work was performed within the framework of the Program of Basic Research of the State Academies of Sciences for 2013–2020, Direction III.23.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by S. Gorin
Rights and permissions
About this article
Cite this article
Lunev, A.G., Nadezhkin, M.V. Heat Criterion of the Change of Strain-Hardening Stages in Austenitic Stainless Steel. Phys. Metals Metallogr. 120, 1021–1025 (2019). https://doi.org/10.1134/S0031918X19080118
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0031918X19080118