Abstract
Effect of low-cycle room-temperature reverse bending on the crystallographic texture, metallo-graphic structure, and mechanical properties of sheets of ZE10 magnesium alloy after hot rolling and annealing has been studied. The initial texture is characterized by a wide scatter of basal poles in the transverse direction. In the process of reverse bending, the changes in the initial texture and structure (which is represented by equiaxed grains containing twins) lead to regular changes in the anisotropy of mechanical properties.
Similar content being viewed by others
References
Y. Chino, K. Sassa, and M. Mabuchi, “Texture and stretch formability of Mg-1.5 mass % Zn-0.2 mass % Ce alloy rolled at different rolling temperatures,” Mater. Trans. 49, 2916–2918 (2008).
Technology of straightening in ARKU rollers. http://www.tkzentrum.ru/equipment/arku/item17/
Yu. V. Zil’berg, F.-V. Bakh, D. Borman, M. Rodman, M. Shaper, and M. Khepke, “Effect of alternating bending on the structure and properties of strips from AZ31 magnesium alloy,” Met.Sci. Heat Treat. 51, 170–175 (2009).
A. A. Bryukhanov, P. P. Stoyanov, Yu. V. Zilberg, and D. Rodman, “Anisotropy of mechanical properties of magnesium alloy AZ31 sheets as a result of sign-variable bending deformation,” Metall. Mining Ind. 2(3), 215–219 (2010).
A. A. Bryukhanov, M. Rodman, A. F. Tarasov, P. P. Stoyanov, M. Shaper, and D. Bormann, “Mechanism of the plastic deformation of the AZ31 alloy upon low-cycle reverse bending,” Phys. Met. Metallogr. 111, 623–629 (2011).
T. Uota, T. Suzu, S. Fukumoto, and A. Yamamoto, “EBSD observation for reversible behavior of deformation twins in AZ31B magnesium alloy,” Mater. Trans. 50, 2118–2120 (2009).
V. V. Usov, P. A. Bryukhanov, M. Rodman, N. M. Shkatulyak, M. Shaper, Kh. Kloze, and F.-V. Bakh, “Influence of reversed bending on texture, structure and mechanical properties of α-titanium sheets,” Deform. Fract. Mater., No. 9, 32–37 (2012).
Ya. D. Vishnyakov, A. A. Babareko, S. A. Vladimirov, and I. V. Egiz, Theory of Texture Formation in Metals and Alloys (Nauka, Moscow, 1979) [in Russian].
J. Bohlen, M. R. Nurnberg, J. W. Senn, D. Letzig, and S. R. Agnew, “The texture and anisotropy of magnesium-zinc-rare earth alloy sheets,” Acta Mater. 55, 2101–2112 (2007).
R. K. Mishra, A. K. Gupta, P. R. Rao, A. K. Sachdev, A. M. Kumar, and A. A. Luo, “Influence of cerium on the texture and ductility of magnesium extrusions,” Scr. Mater. 59, 562–565 (2008).
L. W. F. Mackenzie and M. O. Pekguleryuz, “The recrystallization and texture of magnesium-zinccerium alloys,” Scr. Mater. 59, 665–668 (2008).
N. Stanford and M. Barnett, “Effect of composition on the texture and deformation behavior of wrought Mg alloys,” Scr. Mater. 58, 179–182 (2008).
N. Stanford and M. R. Barnett, “Effect of particles on the formation of deformation twins in a magnesiumbased alloy,” Mater. Sci. Eng., A 516, 226–234 (2009).
J. Bohlen, S. Yi, D. Letzig, and K. U. Kainer, “Effect of rare earth elements on the microstructure and texture development in magnesium manganese alloys during extrusion,” Mater. Sci. Eng., A 527, 7092–7098 (2010).
Y. Chino, K. Sassa and M. Mabuchi, “Tensile properties and stretch formability of Mg-1.5 mass %-0.2 mass % Ce sheet rolled at 723 K,” Mater. Trans. 49, 1710–1712 (2008).
S. L. Couling and C. S. Roberts, “New twinning systems in magnesium,” Acta Crystallogr. 9, 972–973 (1956).
Yi. Sangbong, I. Schestakow, and S. Zaefferer, “Twinning-related microstructural evolution during hot rolling and subsequent annealing of pure magnesium,” Mater. Sci. Eng., A 516, 58–64 (2009).
J. Koike and D. Ando, Strain accommodation twins and fracture initiation twins in magnesium alloys. http://www.magnet.ubc.ca/news/images/MagNET%20Workshop%20Abstracts.pdf.
M. R. Barnett, Z. Keshavarz, A. G. Beer, and X. Ma, “Non-Schmid behavior during secondary twinning in a polycrystalline magnesium alloy,” Acta Mater. 56, 5–15 (2008).
M. R. Barnett, “Twinning and the ductility of magnesium alloys. Part II. “Contraction” Twins,” Mater. Sci. Eng., A 464, 8–16 (2007).
D. Letzig, L. Stutz, J. Bohlen, and K. U. Kainer, “Effects of processing, texture and temperature on the formability of AZ31 and ZE10 sheets,” Mater. Sci. Forum 690, 298–301 (2011).
R. Liu, D. L. Yin, and J. T. Wang, “Effect of load direction on tensile yield properties in Mg-3Al-Zn alloy,” Mater. Sci. Forum 682, 145–151 (2011).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.M. Shkatulyak, V.V. Usov, N.A. Volchok, A.A. Bryukhanov, S.V. San’kova, M. Rodman, M. Shaper, C. Klose, 2014, published in Fizika Metallov i Metallovedenie, 2014, Vol. 115, No. 6, pp. 648–655.
Rights and permissions
About this article
Cite this article
Shkatulyak, N.M., Usov, V.V., Volchok, N.A. et al. Effect of reverse bending on texture, structure, and mechanical properties of sheets of magnesium alloys with zinc and zirconium. Phys. Metals Metallogr. 115, 609–616 (2014). https://doi.org/10.1134/S0031918X1406012X
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0031918X1406012X