Abstract
Techniques and instruments for the determination of mechanical properties of materials by scratch and indentation curves are discussed. The capabilities and advantages of the indentation techniques at different scale levels of the deformed volume are shown. A new technique for the hardness determination by the indentation curve of a pyramid is proposed. The scope of application of the indentation techniques for testing mechanical properties of materials is determined.
Similar content being viewed by others
References
Markovets, M.P., Opredelenie mekhanicheskikh svoistv metallov po tverdosti (Determination of Mechanical Properties of Metals by Hardness), Moscow: Mashinostroenie, 1979.
Matyunin, V.M., Operativnaya diagnostika mekhanicheskikh svoistv konstruktsionnykh materialov (Quick Testing of Mechanical Properties of Structural Materials), Moscow: Mosk. Energ. Inst., 2006.
Bulychev, S.I. and Alekhin, V.P., Ispytanie materialov nepreryvnym vdavlivaniem indentora (Testing Materials by Continuous Indentation), Moscow: Mashinostroenie, 1990.
Oliver, W.C. and Pharr, G.M., Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology, Mater. Res. Soc.,, 2004, vol. 19, no. 1, pp. 3–20.
Golovin, Yu.I., Nanoindentirovanie i ego vozmozhnosti (Nanoindentation and Its Capabilities), Moscow: Mashinostroenie, 2009.
Fedosov, S.A. and Peshek, L., Opredelenie mekhanicheskikh svoistv materialov mikroindentirovaniem (Determination of Mechanical Properties of Materials by Microindentation), Moscow: Mosk. Gos. Univ., 2004.
Matyunin, V.M., Size effect and its influence on the mechanical properties of materials, Zavod. Lab., Diagn. Mater., 2012, vol. 78, no. 2, pp. 64–68.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.M. Matyunin, A.Yu. Marchenkov, P.V. Volkov, A.N. Demidov, 2015, published in Zavodskaya Laboratoriya, Diagnostika Materialov, 2015, Vol. 81, No. 4, pp. 47–52.
Rights and permissions
About this article
Cite this article
Matyunin, V.M., Marchenkov, A.Y., Volkov, P.V. et al. Testing mechanical properties of materials by indentation curves at different scale levels. Inorg Mater 52, 1503–1508 (2016). https://doi.org/10.1134/S0020168516150127
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020168516150127