Abstract
New data were obtained on the effect of small additions of nanoparticles on the mechanical properties of a metal matrix produced by cold pressing of powders with subsequent sintering in a forevacuum. The matrix was a sintered aluminum powder or aluminum–1.5 vol % copper powder mixture. The strengthener was alumina nanoparticles at concentrations of 0.01–0.15 vol %. It was shown that the strength characteristics of these materials as determined by tensile, compressive, and flexural testing and by the offset yield strength method are significantly higher.
Similar content being viewed by others
References
Kostikov, V.I., Agureev, L.E., and Eremeeva, Zh.V., Izv. Vyssh. Uchebn. Zaved., Poroshk. Metallurg. Funkts. Pokrytiya, 2014, no. 1, pp. 35–38.
Kostikov, V.I., Lopatin, V.Yu., Eremeeva, Zh.V., et al., Izv. Yugo-Zapadn. Gos. Univ., Ser.: Tekhn. Tekhnol., 2014, no. 1, pp. 52–61.
Ibrahim, A., Mohamed, E.A., and Lavernia, E.J., J. Mater. Sci., 1991, vol. 26, no. 5, pp. P. 1137–1156.
Eisenkolb, F., Forschritte des Pulvermetallurgie, Berlin: Akademie-Verlag, 1965. Translated under the title Uspekhi poroshkovoi metallurgii, Moscow: Metallurgiya, 1969.
Belov, P.A., Volkov-Bogorodskii, D.B., Dudchenko, A.A., Kochemasova, E.I., Lurie, S.A., Obraztsov, I.F., Potupchik, E.M., Shumova, N.P., and Yanovskii, Yu.G., Mekh. Kompozits. Mater. Konstrukts., 2004, vol. 10, no. 4, pp. 596–612.
Lurie, S., Belov, P., Volkov-Bogorodsky, D., and Tuchkova, N.I., J. Mater. Sci., 2006, vol. 41, no. 20, pp. 6693–6707.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.V. Mironov, L.E. Agureev, Zh.V. Eremeeva, V.I. Kostikov, 2018, published in Doklady Akademii Nauk, 2018, Vol. 481, No. 5.
Rights and permissions
About this article
Cite this article
Mironov, V.V., Agureev, L.E., Eremeeva, Z.V. et al. Effect of Small Additions of Alumina Nanoparticles on the Strength Characteristics of an Aluminum Material. Dokl Phys Chem 481, 110–113 (2018). https://doi.org/10.1134/S001250161808002X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S001250161808002X